@@ -252,7 +252,8 @@
#define MUSTAT_ORDYN 0x40 /* 0 = MUDATA can accept a command or data */
#define A_GPIO 0x18 /* GPIO on Audigy card (16bits) */
-#define A_GPINPUT_MASK 0xff00
+#define A_GPINPUT_MASK 0xff00 /* Alice/2 has 8 input pins */
+#define A3_GPINPUT_MASK 0x3f00 /* ... while Tina/2 has only 6 */
#define A_GPOUTPUT_MASK 0x00ff
// The GPIO port is used for I/O config on Sound Blasters;
@@ -255,16 +255,19 @@ void snd_emu1010_fpga_write(struct snd_emu10k1 *emu, u32 reg, u32 value)
void snd_emu1010_fpga_read(struct snd_emu10k1 *emu, u32 reg, u32 *value)
{
+ // The higest input pin is used as the designated interrupt trigger,
+ // so it needs to be masked out.
+ u32 mask = emu->card_capabilities->ca0108_chip ? 0x1f : 0x7f;
unsigned long flags;
if (snd_BUG_ON(reg > 0x3f))
return;
reg += 0x40; /* 0x40 upwards are registers. */
spin_lock_irqsave(&emu->emu_lock, flags);
outw(reg, emu->port + A_GPIO);
udelay(10);
outw(reg | 0x80, emu->port + A_GPIO); /* High bit clocks the value into the fpga. */
udelay(10);
- *value = ((inw(emu->port + A_GPIO) >> 8) & 0x7f);
+ *value = ((inw(emu->port + A_GPIO) >> 8) & mask);
spin_unlock_irqrestore(&emu->emu_lock, flags);
}
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> --- include/sound/emu10k1.h | 3 ++- sound/pci/emu10k1/io.c | 5 ++++- 2 files changed, 6 insertions(+), 2 deletions(-)