diff mbox series

[03/23] arm64: zynqmp: Set qspi tx-buswidth to 4

Message ID 0cc9dce0330abf3df46252ab63a3930bded23e4b.1683034376.git.michal.simek@amd.com
State New
Headers show
Series arm64: zynqmp: Misc zynqmp changes | expand

Commit Message

Michal Simek May 2, 2023, 1:35 p.m. UTC
From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>

All ZynqMP boards are setting up tx-buswidth to 1. Due to this the
framework only issues 1-1-1 write commands to the GQSPI driver. But the
GQSPI controller is capable of handling 1-4-4 write commands, so updated
the tx-buswidth to 4.
This would enable the spi-nor framework to issue 1-4-4 write commands
instead of 1-1-1. This will increase the tx data transfer rate, as now the
tx data will be transferred on four lines instead on single line.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
---

 arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts      | 2 +-
 arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts      | 2 +-
 arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts      | 2 +-
 arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts      | 2 +-
 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts | 2 +-
 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts | 2 +-
 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts      | 2 +-
 arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts      | 2 +-
 arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts      | 2 +-
 arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts      | 2 +-
 arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts      | 2 +-
 11 files changed, 11 insertions(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
index 34412304d09f..dcc17e3ea961 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -85,7 +85,7 @@  flash@0 { /* MT25QU512A */
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0>;
-		spi-tx-bus-width = <1>;
+		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <40000000>; /* 40MHz */
 		partition@0 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts
index f1598527e5ec..4d301ea0bdcb 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts
@@ -44,7 +44,7 @@  flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x0>;
-		spi-tx-bus-width = <1>;
+		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
 	};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts
index 04efa1683eaa..485a7b21157a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts
@@ -45,7 +45,7 @@  flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x0>;
-		spi-tx-bus-width = <1>;
+		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
 	};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts
index e971ba8c1418..676b8550a625 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts
@@ -47,7 +47,7 @@  &qspi {
 	flash@0 {
 		compatible = "m25p80", "jedec,spi-nor";
 		reg = <0x0>;
-		spi-tx-bus-width = <1>;
+		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <108000000>;
 	};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
index 5fa9604f05d1..35fe7857459a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
@@ -355,7 +355,7 @@  flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x0>;
-		spi-tx-bus-width = <1>;
+		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
 	};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
index 6e0106bf1294..311cb2f81c7b 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
@@ -173,7 +173,7 @@  flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x0>;
-		spi-tx-bus-width = <1>;
+		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>; /* also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
 	};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 78043d9de7cc..5b6403865541 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -957,7 +957,7 @@  flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x0>;
-		spi-tx-bus-width = <1>;
+		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
 	};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
index c1779c88ec34..a74a2061431a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
@@ -444,7 +444,7 @@  flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x0>;
-		spi-tx-bus-width = <1>;
+		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
 	};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
index b857c1950496..73972d83ed4d 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
@@ -456,7 +456,7 @@  flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x0>;
-		spi-tx-bus-width = <1>;
+		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
 	};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index e4e09afbdc1a..5a54d066db86 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -964,7 +964,7 @@  flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x0>;
-		spi-tx-bus-width = <1>;
+		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
 	};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index 791b2ac9fbdb..3b37df98700c 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -794,7 +794,7 @@  flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0x0>;
-		spi-tx-bus-width = <1>;
+		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
 		spi-max-frequency = <108000000>; /* Based on DC1 spec */
 	};