@@ -13,6 +13,16 @@
#define PMK8350_SID 0
#endif
+/ {
+ reboot-mode {
+ compatible = "nvmem-reboot-mode";
+ nvmem-cells = <&reboot_reason>;
+ nvmem-cell-names = "reboot-mode";
+ mode-recovery = <0x01>;
+ mode-bootloader = <0x02>;
+ };
+};
+
&spmi_bus {
pmk8350: pmic@PMK8350_SID {
compatible = "qcom,pmk8350", "qcom,spmi-pmic";
@@ -66,6 +76,19 @@ pmk8350_rtc: rtc@6100 {
status = "disabled";
};
+ pmk8350_sdam_2: nvram@7100 {
+ compatible = "qcom,spmi-sdam";
+ reg = <0x7100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x7100 0x100>;
+
+ reboot_reason: reboot-reason@48 {
+ reg = <0x48 0x1>;
+ bits = <1 7>;
+ };
+ };
+
pmk8350_gpios: gpio@b000 {
compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio";
reg = <0xb000>;
Introduce sdam_2 node, which is to be used via nvmem for power on reasons during reboot. Add supported PoN reasons supported via sdam_2 node. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> --- arch/arm64/boot/dts/qcom/pmk8350.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)