diff mbox series

phy: qcom: qmp-combo: fix Display Port PHY configuration for SM8550

Message ID 20230601-topic-sm8550-upstream-dp-phy-init-fix-v1-1-4e9da9f97991@linaro.org
State Accepted
Commit 6cd52a2a06774c6c454ffef084c3d9b17618ca23
Headers show
Series phy: qcom: qmp-combo: fix Display Port PHY configuration for SM8550 | expand

Commit Message

Neil Armstrong June 1, 2023, 9:39 a.m. UTC 
The SM8550 PHY also uses a different offset for the CMN_STATUS reg,
use the right one for the v6 Display Port configuration.

Fixes: 49742e9edab3 ("phy: qcom-qmp-combo: Add support for SM8550")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)


---
base-commit: d4cee89031c80066ec461bb77b5e13a4f37d5fd2
change-id: 20230601-topic-sm8550-upstream-dp-phy-init-fix-ed90c001592d

Best regards,

Comments

Neil Armstrong June 19, 2023, 8:11 a.m. UTC | #1 
Hi Vinod,

On 01/06/2023 11:39, Neil Armstrong wrote:
> The SM8550 PHY also uses a different offset for the CMN_STATUS reg,
> use the right one for the v6 Display Port configuration.
> 
> Fixes: 49742e9edab3 ("phy: qcom-qmp-combo: Add support for SM8550")
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

<snip>

Gentle ping!

This fix is needed to have functional DisplayPort on SM8550,

Thanks,
Neil
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 33cc99d9c77d..bebce8c591a3 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2151,6 +2151,7 @@  static void qmp_v4_configure_dp_tx(struct qmp_combo *qmp)
 static int qmp_v456_configure_dp_phy(struct qmp_combo *qmp,
 				     unsigned int com_resetm_ctrl_reg,
 				     unsigned int com_c_ready_status_reg,
+				     unsigned int com_cmn_status_reg,
 				     unsigned int dp_phy_status_reg)
 {
 	const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
@@ -2207,14 +2208,14 @@  static int qmp_v456_configure_dp_phy(struct qmp_combo *qmp,
 			10000))
 		return -ETIMEDOUT;
 
-	if (readl_poll_timeout(qmp->dp_serdes + QSERDES_V4_COM_CMN_STATUS,
+	if (readl_poll_timeout(qmp->dp_serdes + com_cmn_status_reg,
 			status,
 			((status & BIT(0)) > 0),
 			500,
 			10000))
 		return -ETIMEDOUT;
 
-	if (readl_poll_timeout(qmp->dp_serdes + QSERDES_V4_COM_CMN_STATUS,
+	if (readl_poll_timeout(qmp->dp_serdes + com_cmn_status_reg,
 			status,
 			((status & BIT(1)) > 0),
 			500,
@@ -2250,6 +2251,7 @@  static int qmp_v4_configure_dp_phy(struct qmp_combo *qmp)
 
 	ret = qmp_v456_configure_dp_phy(qmp, QSERDES_V4_COM_RESETSM_CNTRL,
 					QSERDES_V4_COM_C_READY_STATUS,
+					QSERDES_V4_COM_CMN_STATUS,
 					QSERDES_V4_DP_PHY_STATUS);
 	if (ret < 0)
 		return ret;
@@ -2314,6 +2316,7 @@  static int qmp_v5_configure_dp_phy(struct qmp_combo *qmp)
 
 	ret = qmp_v456_configure_dp_phy(qmp, QSERDES_V4_COM_RESETSM_CNTRL,
 					QSERDES_V4_COM_C_READY_STATUS,
+					QSERDES_V4_COM_CMN_STATUS,
 					QSERDES_V4_DP_PHY_STATUS);
 	if (ret < 0)
 		return ret;
@@ -2373,6 +2376,7 @@  static int qmp_v6_configure_dp_phy(struct qmp_combo *qmp)
 
 	ret = qmp_v456_configure_dp_phy(qmp, QSERDES_V6_COM_RESETSM_CNTRL,
 					QSERDES_V6_COM_C_READY_STATUS,
+					QSERDES_V6_COM_CMN_STATUS,
 					QSERDES_V6_DP_PHY_STATUS);
 	if (ret < 0)
 		return ret;