diff mbox series

[4/4] MIPS: DTS: qi_lb60: Don't use unit address for regulators

Message ID 20230604122655.69698-4-paul@crapouillou.net
State Accepted
Commit 4cdb5d9d39f010ba98e93e657f36c59a3cdf8730
Headers show
Series None | expand

Commit Message

Paul Cercueil June 4, 2023, 12:26 p.m. UTC 
The regulators don't have any "reg" property, and therefore shouldn't
use an unit address in their node names.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org
---
 arch/mips/boot/dts/ingenic/qi_lb60.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/mips/boot/dts/ingenic/qi_lb60.dts b/arch/mips/boot/dts/ingenic/qi_lb60.dts
index ba0218971572..24f987244a12 100644
--- a/arch/mips/boot/dts/ingenic/qi_lb60.dts
+++ b/arch/mips/boot/dts/ingenic/qi_lb60.dts
@@ -27,7 +27,7 @@  chosen {
 		stdout-path = &uart0;
 	};
 
-	vcc: regulator@0 {
+	vcc: regulator-0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc";
 
@@ -36,7 +36,7 @@  vcc: regulator@0 {
 		regulator-always-on;
 	};
 
-	mmc_power: regulator@1 {
+	mmc_power: regulator-1 {
 		compatible = "regulator-fixed";
 		regulator-name = "mmc_vcc";
 		gpio = <&gpd 2 0>;
@@ -45,7 +45,7 @@  mmc_power: regulator@1 {
 		regulator-max-microvolt = <3300000>;
 	};
 
-	amp_supply: regulator@2 {
+	amp_supply: regulator-2 {
 		compatible = "regulator-fixed";
 		regulator-name = "amp_supply";
 		gpio = <&gpd 4 0>;