diff mbox series

[5/9] MIPS: DTS: CI20: Misc. cleanups

Message ID 20230604145642.200577-6-paul@crapouillou.net
State Accepted
Commit 5fe60d3b680106109fd5c8b5270ef83f076b0c65
Headers show
Series MIPS: CI20: Add WiFi / Bluetooth support | expand

Commit Message

Paul Cercueil June 4, 2023, 2:56 p.m. UTC 
- Use the standard "ecc-engine" property instead of the custom
"ingenic,bch-controller" to get a handle to the BCH controller.

- Respect cell sizes in the Ethernet controller node.

- Use proper macro for interrupt type instead of hardcoding magic
  values.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 arch/mips/boot/dts/ingenic/ci20.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 7f6e7a4e3915..b7dbafa1f85d 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -356,7 +356,7 @@  nandc: nand-controller@1 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ingenic,bch-controller = <&bch>;
+		ecc-engine = <&bch>;
 
 		ingenic,nemc-tAS = <10>;
 		ingenic,nemc-tAH = <5>;
@@ -422,8 +422,8 @@  dm9000@6 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pins_nemc_cs6>;
 
-		reg = <6 0 1   /* addr */
-		       6 2 1>; /* data */
+		reg = <6 0 1>, /* addr */
+		      <6 2 1>; /* data */
 
 		ingenic,nemc-tAS = <15>;
 		ingenic,nemc-tAH = <10>;
@@ -435,7 +435,7 @@  dm9000@6 {
 		vcc-supply = <&eth0_power>;
 
 		interrupt-parent = <&gpe>;
-		interrupts = <19 4>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
 
 		nvmem-cells = <&eth0_addr>;
 		nvmem-cell-names = "mac-address";