new file mode 100644
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,rpm-proc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Resource Power Manager (RPM) Processor/Subsystem
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description:
+ Resource Power Manager (RPM) subsystem found in various Qualcomm platforms.
+ The RPM allows each component in the system to vote for state of the system
+ resources, such as clocks, regulators and bus frequencies. rpm-proc is the
+ top-level device tree node that groups all the RPM functionality together.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - qcom,apq8084-rpm-proc
+ - qcom,ipq6018-rpm-proc
+ - qcom,ipq9574-rpm-proc
+ - qcom,mdm9607-rpm-proc
+ - qcom,msm8226-rpm-proc
+ - qcom,msm8610-rpm-proc
+ - qcom,msm8909-rpm-proc
+ - qcom,msm8916-rpm-proc
+ - qcom,msm8917-rpm-proc
+ - qcom,msm8936-rpm-proc
+ - qcom,msm8937-rpm-proc
+ - qcom,msm8952-rpm-proc
+ - qcom,msm8953-rpm-proc
+ - qcom,msm8974-rpm-proc
+ - qcom,msm8976-rpm-proc
+ - qcom,msm8994-rpm-proc
+ - qcom,msm8996-rpm-proc
+ - qcom,msm8998-rpm-proc
+ - qcom,qcm2290-rpm-proc
+ - qcom,qcs404-rpm-proc
+ - qcom,sdm660-rpm-proc
+ - qcom,sm6115-rpm-proc
+ - qcom,sm6125-rpm-proc
+ - qcom,sm6375-rpm-proc
+ - const: qcom,rpm-proc
+
+ smd-edge:
+ $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
+ description:
+ Qualcomm Shared Memory subnode which represents communication edge,
+ channels and devices related to the RPM subsystem.
+
+ glink-rpm:
+ $ref: /schemas/remoteproc/qcom,glink-rpm-edge.yaml#
+ description:
+ Qualcomm G-Link subnode which represents communication edge,
+ channels and devices related to the RPM subsystem.
+
+ interrupt-controller:
+ type: object
+ $ref: /schemas/interrupt-controller/qcom,mpm.yaml#
+ description:
+ MSM Power Manager (MPM) interrupt controller that monitors interrupts
+ when the system is asleep.
+
+ master-stats:
+ $ref: /schemas/soc/qcom/qcom,rpm-master-stats.yaml#
+ description:
+ Subsystem-level low-power mode statistics provided by RPM.
+
+required:
+ - compatible
+
+oneOf:
+ - required:
+ - smd-edge
+ - required:
+ - glink-rpm
+
+additionalProperties: false
+
+examples:
+ # SMD
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ remoteproc-rpm {
+ compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc";
+
+ smd-edge {
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm-requests {
+ compatible = "qcom,rpm-msm8916";
+ qcom,smd-channels = "rpm_requests";
+ /* ... */
+ };
+ };
+ };
+ # GLINK
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ remoteproc-rpm {
+ compatible = "qcom,qcm2290-rpm-proc", "qcom,rpm-proc";
+
+ glink-rpm {
+ compatible = "qcom,glink-rpm";
+ interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm-requests {
+ compatible = "qcom,rpm-qcm2290";
+ qcom,glink-channels = "rpm_requests";
+ /* ... */
+ };
+ };
+ };
On Qualcomm platforms, most subsystems (e.g. audio/modem DSP) are described as remote processors in the device tree, with a dedicated node where properties and services related to them can be described. The Resource Power Manager (RPM) is also such a subsystem, with a remote processor that is running a special firmware. Unfortunately, the RPM never got a dedicated node representing it properly in the device tree. Most of the RPM services are described below a top-level /smd or /rpm-glink node. However, SMD/GLINK is just one of the communication channels to the RPM firmware. For example, the MPM interrupt functionality provided by the RPM does not use SMD/GLINK but writes directly to a special memory region allocated by the RPM firmware in combination with a mailbox. Currently there is no good place in the device tree to describe this functionality. It doesn't belong below SMD/GLINK but it's not an independent top-level device either. Introduce a new "qcom,rpm-proc" compatible that allows describing the RPM as a remote processor/subsystem like all others. The SMD/GLINK node is moved to a "smd-edge"/"glink-edge" subnode consistent with other existing bindings. Additional subnodes (e.g. interrupt-controller for MPM, rpm-master-stats) can be also added there. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> --- .../bindings/remoteproc/qcom,rpm-proc.yaml | 125 +++++++++++++++++++++ 1 file changed, 125 insertions(+)