diff mbox series

[v3,3/6] clk: qcom: Add lpass clock controller driver for SC8280XP

Message ID 20230608125315.11454-4-srinivas.kandagatla@linaro.org
State Accepted
Commit a5c9c3ba243ab9a7695b7125d06758f43952b58b
Headers show
Series clk: qcom: sc8280xp: add lpasscc reset control | expand

Commit Message

Srinivas Kandagatla June 8, 2023, 12:53 p.m. UTC
Add support for the lpass clock controller found on SC8280XP based devices.
This would allow lpass peripheral loader drivers to control the clocks and
bring the subsystems out of reset.

Currently this patch only supports resets as the Q6DSP is in control of
LPASS IP which manages most of the clocks via Q6PRM service on GPR rpmsg
channel.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/clk/qcom/Kconfig            |  9 ++++
 drivers/clk/qcom/Makefile           |  1 +
 drivers/clk/qcom/lpasscc-sc8280xp.c | 64 +++++++++++++++++++++++++++++
 3 files changed, 74 insertions(+)
 create mode 100644 drivers/clk/qcom/lpasscc-sc8280xp.c
diff mbox series

Patch

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 9cd1f05d436b..263e55d75e3f 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -551,6 +551,15 @@  config SC_LPASSCC_7280
 	  Say Y if you want to use the LPASS branch clocks of the LPASS clock
 	  controller to reset the LPASS subsystem.
 
+config SC_LPASSCC_8280XP
+	tristate "SC8280 Low Power Audio Subsystem (LPASS) Clock Controller"
+	depends on ARM64 || COMPILE_TEST
+	select SC_GCC_8280XP
+	help
+	  Support for the LPASS clock controller on SC8280XP devices.
+	  Say Y if you want to use the LPASS branch clocks of the LPASS clock
+	  controller to reset the LPASS subsystem.
+
 config SC_LPASS_CORECC_7180
 	tristate "SC7180 LPASS Core Clock Controller"
 	depends on ARM64 || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 75d035150118..e6e294274c35 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -81,6 +81,7 @@  obj-$(CONFIG_SC_GPUCC_7180) += gpucc-sc7180.o
 obj-$(CONFIG_SC_GPUCC_7280) += gpucc-sc7280.o
 obj-$(CONFIG_SC_GPUCC_8280XP) += gpucc-sc8280xp.o
 obj-$(CONFIG_SC_LPASSCC_7280) += lpasscc-sc7280.o
+obj-$(CONFIG_SC_LPASSCC_8280XP) += lpasscc-sc8280xp.o
 obj-$(CONFIG_SC_LPASS_CORECC_7180) += lpasscorecc-sc7180.o
 obj-$(CONFIG_SC_LPASS_CORECC_7280) += lpasscorecc-sc7280.o lpassaudiocc-sc7280.o
 obj-$(CONFIG_SC_MSS_7180) += mss-sc7180.o
diff --git a/drivers/clk/qcom/lpasscc-sc8280xp.c b/drivers/clk/qcom/lpasscc-sc8280xp.c
new file mode 100644
index 000000000000..4a0470fc6153
--- /dev/null
+++ b/drivers/clk/qcom/lpasscc-sc8280xp.c
@@ -0,0 +1,64 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
+
+#include "common.h"
+#include "reset.h"
+
+static const struct qcom_reset_map lpasscc_sc8280xp_resets[] = {
+	[LPASS_AUDIO_SWR_TX_CGCR] = { 0xc010, 1 },
+};
+
+static struct regmap_config lpasscc_sc8280xp_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.name = "lpass-tcsr",
+	.max_register = 0x12000,
+};
+
+static const struct qcom_cc_desc lpasscc_sc8280xp_reset_desc = {
+	.config = &lpasscc_sc8280xp_regmap_config,
+	.resets = lpasscc_sc8280xp_resets,
+	.num_resets = ARRAY_SIZE(lpasscc_sc8280xp_resets),
+};
+
+static const struct of_device_id lpasscc_sc8280xp_match_table[] = {
+	{
+		.compatible = "qcom,sc8280xp-lpasscc",
+		.data = &lpasscc_sc8280xp_reset_desc,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lpasscc_sc8280xp_match_table);
+
+static int lpasscc_sc8280xp_probe(struct platform_device *pdev)
+{
+	const struct qcom_cc_desc *desc = of_device_get_match_data(&pdev->dev);
+
+	return qcom_cc_probe_by_index(pdev, 0, desc);
+}
+
+static struct platform_driver lpasscc_sc8280xp_driver = {
+	.probe = lpasscc_sc8280xp_probe,
+	.driver = {
+		.name = "lpasscc-sc8280xp",
+		.of_match_table = lpasscc_sc8280xp_match_table,
+	},
+};
+
+module_platform_driver(lpasscc_sc8280xp_driver);
+
+MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@linaro.org>");
+MODULE_DESCRIPTION("QTI LPASSCC SC8280XP Driver");
+MODULE_LICENSE("GPL");