diff mbox series

arm64: dts: qcom: sc8180x: Move DisplayPort for MMCX

Message ID 20230612220739.1886155-1-quic_bjorande@quicinc.com
State Accepted
Commit 2d7b1a31ffb865d1f8e95e985cdbd0df72f671cf
Headers show
Series arm64: dts: qcom: sc8180x: Move DisplayPort for MMCX | expand

Commit Message

Bjorn Andersson June 12, 2023, 10:07 p.m. UTC 
The DisplayPort blocks are powered by MMCX and should be described as
such to ensure that power votes are done on the right resource.

This also solves the problem that sync_state is unaware of the DP
controllers needing MMCX to be kept alive during boot. As such this
change also fixes occasionally seen crashes during boot due to
undervoltage of MMCX.

Fixes: 494dec9b6f54 ("arm64: dts: qcom: sc8180x: Add display and gpu nodes")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sc8180x.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 3de62e26d56a..a7668f9e68d6 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -2969,7 +2969,7 @@  mdss_dp0: displayport-controller@ae90000 {
 				#sound-dai-cells = <0>;
 
 				operating-points-v2 = <&dp0_opp_table>;
-				power-domains = <&rpmhpd SC8180X_CX>;
+				power-domains = <&rpmhpd SC8180X_MMCX>;
 
 				status = "disabled";
 
@@ -3043,7 +3043,7 @@  mdss_dp1: displayport-controller@ae98000 {
 				#sound-dai-cells = <0>;
 
 				operating-points-v2 = <&dp0_opp_table>;
-				power-domains = <&rpmhpd SC8180X_CX>;
+				power-domains = <&rpmhpd SC8180X_MMCX>;
 
 				status = "disabled";
 
@@ -3117,7 +3117,7 @@  mdss_edp: displayport-controller@ae9a000 {
 				#sound-dai-cells = <0>;
 
 				operating-points-v2 = <&edp_opp_table>;
-				power-domains = <&rpmhpd SC8180X_CX>;
+				power-domains = <&rpmhpd SC8180X_MMCX>;
 
 				status = "disabled";