@@ -11,7 +11,7 @@
#include <linux/device.h>
#include <linux/list.h>
#include <linux/pci.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/videodev2.h>
@@ -26,7 +26,6 @@
#include <linux/dma-mapping.h>
#include <linux/pm_qos.h>
#include <linux/via-core.h>
-#include <linux/via-gpio.h>
#include <linux/via_i2c.h>
#ifdef CONFIG_X86
@@ -71,8 +70,8 @@ struct via_camera {
/*
* GPIO info for power/reset management
*/
- int power_gpio;
- int reset_gpio;
+ struct gpio_desc *power_gpio;
+ struct gpio_desc *reset_gpio;
/*
* I/O memory stuff.
*/
@@ -180,27 +179,19 @@ static struct via_format *via_find_format(u32 pixelformat)
*/
static int via_sensor_power_setup(struct via_camera *cam)
{
- int ret;
+ struct device *dev = &cam->platdev->dev;
+
+ cam->power_gpio = devm_gpiod_get(dev, "VGPIO3", GPIOD_OUT_LOW);
+ if (IS_ERR(cam->power_gpio))
+ return dev_err_probe(dev, PTR_ERR(cam->power_gpio),
+ "failed to get power GPIO");
+
+ /* Request the reset line asserted */
+ cam->reset_gpio = devm_gpiod_get(dev, "VGPIO2", GPIOD_OUT_HIGH);
+ if (IS_ERR(cam->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(cam->reset_gpio),
+ "failed to get reset GPIO");
- cam->power_gpio = viafb_gpio_lookup("VGPIO3");
- cam->reset_gpio = viafb_gpio_lookup("VGPIO2");
- if (!gpio_is_valid(cam->power_gpio) || !gpio_is_valid(cam->reset_gpio)) {
- dev_err(&cam->platdev->dev, "Unable to find GPIO lines\n");
- return -EINVAL;
- }
- ret = gpio_request(cam->power_gpio, "viafb-camera");
- if (ret) {
- dev_err(&cam->platdev->dev, "Unable to request power GPIO\n");
- return ret;
- }
- ret = gpio_request(cam->reset_gpio, "viafb-camera");
- if (ret) {
- dev_err(&cam->platdev->dev, "Unable to request reset GPIO\n");
- gpio_free(cam->power_gpio);
- return ret;
- }
- gpio_direction_output(cam->power_gpio, 0);
- gpio_direction_output(cam->reset_gpio, 0);
return 0;
}
@@ -209,25 +200,23 @@ static int via_sensor_power_setup(struct via_camera *cam)
*/
static void via_sensor_power_up(struct via_camera *cam)
{
- gpio_set_value(cam->power_gpio, 1);
- gpio_set_value(cam->reset_gpio, 0);
+ gpiod_set_value(cam->power_gpio, 1);
+ gpiod_set_value(cam->reset_gpio, 1);
msleep(20); /* Probably excessive */
- gpio_set_value(cam->reset_gpio, 1);
+ gpiod_set_value(cam->reset_gpio, 0);
msleep(20);
}
static void via_sensor_power_down(struct via_camera *cam)
{
- gpio_set_value(cam->power_gpio, 0);
- gpio_set_value(cam->reset_gpio, 0);
+ gpiod_set_value(cam->power_gpio, 0);
+ gpiod_set_value(cam->reset_gpio, 1);
}
static void via_sensor_power_release(struct via_camera *cam)
{
via_sensor_power_down(cam);
- gpio_free(cam->power_gpio);
- gpio_free(cam->reset_gpio);
}
/* --------------------------------------------------------------------------*/
@@ -11,7 +11,7 @@
#include <linux/aperture.h>
#include <linux/via-core.h>
#include <linux/via_i2c.h>
-#include <linux/via-gpio.h>
+#include "via-gpio.h"
#include "global.h"
#include <linux/module.h>
@@ -7,6 +7,7 @@
#include <linux/spinlock.h>
#include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
#include <linux/platform_device.h>
#include <linux/via-core.h>
#include <linux/via-gpio.h>
@@ -189,19 +190,14 @@ static struct viafb_pm_hooks viafb_gpio_pm_hooks = {
};
#endif /* CONFIG_PM */
-/*
- * Look up a specific gpio and return the number it was assigned.
- */
-int viafb_gpio_lookup(const char *name)
-{
- int i;
-
- for (i = 0; i < viafb_gpio_config.gpio_chip.ngpio; i++)
- if (!strcmp(name, viafb_gpio_config.active_gpios[i]->vg_name))
- return viafb_gpio_config.gpio_chip.base + i;
- return -1;
-}
-EXPORT_SYMBOL_GPL(viafb_gpio_lookup);
+static struct gpiod_lookup_table viafb_gpio_table = {
+ .dev_id = "viafb-camera",
+ .table = {
+ GPIO_LOOKUP("via-gpio", 2, "VGPIO2", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("via-gpio", 3, "VGPIO3", GPIO_ACTIVE_HIGH),
+ { }
+ },
+};
/*
* Platform device stuff.
@@ -249,12 +245,16 @@ static int viafb_gpio_probe(struct platform_device *platdev)
* Get registered.
*/
viafb_gpio_config.gpio_chip.base = -1; /* Dynamic */
+ viafb_gpio_config.gpio_chip.label = "via-gpio";
ret = gpiochip_add_data(&viafb_gpio_config.gpio_chip,
&viafb_gpio_config);
if (ret) {
printk(KERN_ERR "viafb: failed to add gpios (%d)\n", ret);
viafb_gpio_config.gpio_chip.ngpio = 0;
}
+
+ gpiod_add_lookup_table(&viafb_gpio_table);
+
#ifdef CONFIG_PM
viafb_pm_register(&viafb_gpio_pm_hooks);
#endif
similarity index 84%
rename from include/linux/via-gpio.h
rename to drivers/video/fbdev/via/via-gpio.h
@@ -8,7 +8,6 @@
#ifndef __VIA_GPIO_H__
#define __VIA_GPIO_H__
-extern int viafb_gpio_lookup(const char *name);
extern int viafb_gpio_init(void);
extern void viafb_gpio_exit(void);
#endif
The VIA fbdev exposes a custom GPIO chip for its GPIOs, these are in turn looked up the camera driver using a custom API. Drop the custom API, provide a look-up table and convert to GPIO descriptors. Note proper polarity on the RESET line. Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- I don't know about the merge path for this one, let's merge it in the provider (fbdev) if possible. This looks like OLPC stuff. --- drivers/media/platform/via/via-camera.c | 51 ++++++++----------- drivers/video/fbdev/via/via-core.c | 2 +- drivers/video/fbdev/via/via-gpio.c | 26 +++++----- .../video/fbdev/via}/via-gpio.h | 1 - 4 files changed, 34 insertions(+), 46 deletions(-) rename {include/linux => drivers/video/fbdev/via}/via-gpio.h (84%)