| Message ID | 1465228765-14038-4-git-send-email-sudeep.holla@arm.com |
|---|---|
| State | New |
| Headers | show |
On Mon, Jun 06, 2016 at 04:59:25PM +0100, Sudeep Holla wrote: > This patch adds power domain information to coresight devices using > SCPI power domains. > > Cc: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> > Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > Cc: linux-arm-kernel@lists.infradead.org > Cc: devicetree@vger.kernel.org > Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> > --- > arch/arm64/boot/dts/arm/juno-base.dtsi | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > > diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi > index 49fa55cdc977..ef054094d5a8 100644 > --- a/arch/arm64/boot/dts/arm/juno-base.dtsi > +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi > @@ -75,6 +75,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > ports { > #address-cells = <1>; > #size-cells = <0>; > @@ -105,6 +106,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > port { > tpiu_in_port: endpoint { > slave-mode; > @@ -120,6 +122,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > ports { > #address-cells = <1>; > #size-cells = <0>; > @@ -157,6 +160,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > port { > etr_in_port: endpoint { > slave-mode; > @@ -208,6 +212,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > ports { > #address-cells = <1>; > #size-cells = <0>; > @@ -244,6 +249,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > ports { > #address-cells = <1>; > #size-cells = <0>; > @@ -293,6 +299,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > port { > cluster0_etm0_out_port: endpoint { > remote-endpoint = <&cluster0_funnel_in_port0>; > @@ -306,6 +313,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > port { > cluster0_etm1_out_port: endpoint { > remote-endpoint = <&cluster0_funnel_in_port1>; > @@ -319,6 +327,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > port { > cluster1_etm0_out_port: endpoint { > remote-endpoint = <&cluster1_funnel_in_port0>; > @@ -332,6 +341,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > port { > cluster1_etm1_out_port: endpoint { > remote-endpoint = <&cluster1_funnel_in_port1>; > @@ -345,6 +355,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > port { > cluster1_etm2_out_port: endpoint { > remote-endpoint = <&cluster1_funnel_in_port2>; > @@ -358,6 +369,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > port { > cluster1_etm3_out_port: endpoint { > remote-endpoint = <&cluster1_funnel_in_port3>; > @@ -428,6 +440,12 @@ > }; > }; > > + scpi_devpd: scpi-power-domains { > + compatible = "arm,scpi-power-domains"; > + num-domains = <2>; > + #power-domain-cells = <1>; > + }; > + > scpi_sensors0: sensors { > compatible = "arm,scpi-sensors"; > #thermal-sensor-cells = <1>; > -- > 2.7.4 > -- ==================== | I would like to | | fix the world, | | but they're not | | giving me the | \ source code! / --------------- ¯\_(ツ)_/¯ -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 6 June 2016 at 09:59, Sudeep Holla <sudeep.holla@arm.com> wrote: > This patch adds power domain information to coresight devices using > SCPI power domains. > > Cc: Liviu Dudau <liviu.dudau@arm.com> > Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > Cc: linux-arm-kernel@lists.infradead.org > Cc: devicetree@vger.kernel.org > Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> > --- > arch/arm64/boot/dts/arm/juno-base.dtsi | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > > diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi > index 49fa55cdc977..ef054094d5a8 100644 > --- a/arch/arm64/boot/dts/arm/juno-base.dtsi > +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi > @@ -75,6 +75,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > ports { > #address-cells = <1>; > #size-cells = <0>; > @@ -105,6 +106,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > port { > tpiu_in_port: endpoint { > slave-mode; > @@ -120,6 +122,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > ports { > #address-cells = <1>; > #size-cells = <0>; > @@ -157,6 +160,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > port { > etr_in_port: endpoint { > slave-mode; > @@ -208,6 +212,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > ports { > #address-cells = <1>; > #size-cells = <0>; > @@ -244,6 +249,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > ports { > #address-cells = <1>; > #size-cells = <0>; > @@ -293,6 +299,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > port { > cluster0_etm0_out_port: endpoint { > remote-endpoint = <&cluster0_funnel_in_port0>; > @@ -306,6 +313,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > port { > cluster0_etm1_out_port: endpoint { > remote-endpoint = <&cluster0_funnel_in_port1>; > @@ -319,6 +327,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > port { > cluster1_etm0_out_port: endpoint { > remote-endpoint = <&cluster1_funnel_in_port0>; > @@ -332,6 +341,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > port { > cluster1_etm1_out_port: endpoint { > remote-endpoint = <&cluster1_funnel_in_port1>; > @@ -345,6 +355,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > port { > cluster1_etm2_out_port: endpoint { > remote-endpoint = <&cluster1_funnel_in_port2>; > @@ -358,6 +369,7 @@ > > clocks = <&soc_smc50mhz>; > clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > port { > cluster1_etm3_out_port: endpoint { > remote-endpoint = <&cluster1_funnel_in_port3>; > @@ -428,6 +440,12 @@ > }; > }; > > + scpi_devpd: scpi-power-domains { > + compatible = "arm,scpi-power-domains"; > + num-domains = <2>; > + #power-domain-cells = <1>; > + }; > + > scpi_sensors0: sensors { > compatible = "arm,scpi-sensors"; > #thermal-sensor-cells = <1>; > -- > 2.7.4 > Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 49fa55cdc977..ef054094d5a8 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -75,6 +75,7 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; ports { #address-cells = <1>; #size-cells = <0>; @@ -105,6 +106,7 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; port { tpiu_in_port: endpoint { slave-mode; @@ -120,6 +122,7 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; ports { #address-cells = <1>; #size-cells = <0>; @@ -157,6 +160,7 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; port { etr_in_port: endpoint { slave-mode; @@ -208,6 +212,7 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; ports { #address-cells = <1>; #size-cells = <0>; @@ -244,6 +249,7 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; ports { #address-cells = <1>; #size-cells = <0>; @@ -293,6 +299,7 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; port { cluster0_etm0_out_port: endpoint { remote-endpoint = <&cluster0_funnel_in_port0>; @@ -306,6 +313,7 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; port { cluster0_etm1_out_port: endpoint { remote-endpoint = <&cluster0_funnel_in_port1>; @@ -319,6 +327,7 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; port { cluster1_etm0_out_port: endpoint { remote-endpoint = <&cluster1_funnel_in_port0>; @@ -332,6 +341,7 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; port { cluster1_etm1_out_port: endpoint { remote-endpoint = <&cluster1_funnel_in_port1>; @@ -345,6 +355,7 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; port { cluster1_etm2_out_port: endpoint { remote-endpoint = <&cluster1_funnel_in_port2>; @@ -358,6 +369,7 @@ clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; + power-domains = <&scpi_devpd 0>; port { cluster1_etm3_out_port: endpoint { remote-endpoint = <&cluster1_funnel_in_port3>; @@ -428,6 +440,12 @@ }; }; + scpi_devpd: scpi-power-domains { + compatible = "arm,scpi-power-domains"; + num-domains = <2>; + #power-domain-cells = <1>; + }; + scpi_sensors0: sensors { compatible = "arm,scpi-sensors"; #thermal-sensor-cells = <1>;
This patch adds power domain information to coresight devices using SCPI power domains. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> --- arch/arm64/boot/dts/arm/juno-base.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html