diff mbox series

[07/10] arm64: dts: imx8ulp-evk: enable CM33 node

Message ID 20230625124238.4071717-8-peng.fan@oss.nxp.com
State New
Headers show
Series arm64: dts: imx8ulp: add more nodes | expand

Commit Message

Peng Fan (OSS) June 25, 2023, 12:42 p.m. UTC 
From: Peng Fan <peng.fan@nxp.com>

Enable CM33 node to support rpmsg feature. To use rpmsg, also need
to enable mu node for mailbox doorbell and reserved memory node
for vring, and data buffer. And reserved a piece DRAM memory for case
that m33 images loaded in DRAM.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 50 +++++++++++++++++++
 1 file changed, 50 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
index e171390a1888..d66e31cf83fe 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
@@ -31,6 +31,42 @@  linux,cma {
 			size = <0 0x28000000>;
 			linux,cma-default;
 		};
+
+		m33_reserved: noncacheable-section@a8600000 {
+			reg = <0 0xa8600000 0 0x1000000>;
+			no-map;
+		};
+
+		rsc_table: rsc-table@1fff8000{
+			reg = <0 0x1fff8000 0 0x1000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@aff00000 {
+			reg = <0 0xaff00000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@aff08000 {
+			reg = <0 0xaff08000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@aff10000 {
+			reg = <0 0xaff10000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@aff18000 {
+			reg = <0 0xaff18000 0 0x8000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@a8400000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa8400000 0 0x100000>;
+			no-map;
+		};
 	};
 
 	clock_ext_rmii: clock-ext-rmii {
@@ -49,6 +85,16 @@  clock_ext_ts: clock-ext-ts {
 	};
 };
 
+&cm33 {
+	mbox-names = "tx", "rx", "rxdb";
+	mboxes = <&mu 0 1>,
+		 <&mu 1 1>,
+		 <&mu 3 1>;
+	memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+			<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+	status = "okay";
+};
+
 &lpuart5 {
 	/* console */
 	pinctrl-names = "default", "sleep";
@@ -92,6 +138,10 @@  ethphy: ethernet-phy@1 {
 	};
 };
 
+&mu {
+	status = "okay";
+};
+
 &iomuxc1 {
 	pinctrl_enet: enetgrp {
 		fsl,pins = <