[1/2] ARM: dts: apq8064: rename db600c to SD_600eval

Message ID	1465551298-21457-1-git-send-email-srinivas.kandagatla@linaro.org
State	New
Headers	show Delivered-To: patch@linaro.org Received-SPF: pass (google.com: best guess record for domain of devicetree-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> To: Andy Gross <andy.gross@linaro.org> Cc: Rob Herring <robh+dt@kernel.org>, David Brown <david.brown@linaro.org>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org, Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Subject: [PATCH 1/2] ARM: dts: apq8064: rename db600c to SD_600eval Date: Fri, 10 Jun 2016 10:34:57 +0100 Message-Id: <1465551298-21457-1-git-send-email-srinivas.kandagatla@linaro.org> Sender: devicetree-owner@vger.kernel.org Precedence: bulk

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 488a943..66e182c 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -573,7 +573,7 @@ dtb-$(CONFIG_ARCH_PRIMA2) += \ dtb-$(CONFIG_ARCH_OXNAS) += \ wd-mbwe.dtb dtb-$(CONFIG_ARCH_QCOM) += \ - qcom-apq8064-arrow-db600c.dtb \ + qcom-apq8064-arrow-sd-600eval.dtb \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ qcom-apq8064-sony-xperia-yuga.dtb \ diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi deleted file mode 100644 index a3efb97..0000000 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi +++ /dev/null @@ -1,52 +0,0 @@ -&tlmm_pinmux { - card_detect: card-detect { - mux { - pins = "gpio26"; - function = "gpio"; - bias-disable; - }; - }; - - pcie_pins: pcie-pinmux { - mux { - pins = "gpio27"; - function = "gpio"; - }; - conf { - pins = "gpio27"; - drive-strength = <12>; - bias-disable; - }; - }; - - user_leds: user-leds { - mux { - pins = "gpio3", "gpio7", "gpio10", "gpio11"; - function = "gpio"; - }; - - conf { - pins = "gpio3", "gpio7", "gpio10", "gpio11"; - function = "gpio"; - output-low; - }; - }; - - magneto_pins: magneto-pins { - mux { - pins = "gpio31", "gpio48"; - function = "gpio"; - bias-disable; - }; - }; -}; - -&pm8921_mpps { - mpp_leds: mpp-leds { - pinconf { - pins = "mpp7", "mpp8"; - function = "digital"; - output-low; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts deleted file mode 100644 index e01b27e..0000000 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts +++ /dev/null @@ -1,349 +0,0 @@ -#include "qcom-apq8064-v2.0.dtsi" -#include "qcom-apq8064-arrow-db600c-pins.dtsi" -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Arrow Electronics, APQ8064 DB600c"; - compatible = "arrow,db600c", "qcom,apq8064"; - - aliases { - serial0 = &gsbi7_serial; - serial1 = &gsbi1_serial; - i2c0 = &gsbi2_i2c; - i2c1 = &gsbi3_i2c; - i2c2 = &gsbi4_i2c; - i2c3 = &gsbi7_i2c; - spi0 = &gsbi5_spi; - }; - - regulators { - compatible = "simple-bus"; - vph: regulator-fixed@1 { - compatible = "regulator-fixed"; - regulator-min-microvolt = <4500000>; - regulator-max-microvolt = <4500000>; - regulator-name = "VPH"; - regulator-type = "voltage"; - regulator-boot-on; - }; - - /* on board fixed 3.3v supply */ - vcc3v3: vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - }; - - soc { - rpm@108000 { - regulators { - vdd_s1-supply = <&vph>; - vdd_s2-supply = <&vph>; - vdd_s3-supply = <&vph>; - vdd_s4-supply = <&vph>; - vdd_s5-supply = <&vph>; - vdd_s6-supply = <&vph>; - vdd_s7-supply = <&vph>; - vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; - vdd_l3_l15_l17-supply = <&vph>; - vdd_l4_l14-supply = <&vph>; - vdd_l5_l8_l16-supply = <&vph>; - vdd_l6_l7-supply = <&vph>; - vdd_l9_l11-supply = <&vph>; - vdd_l10_l22-supply = <&vph>; - vdd_l21_l23_l29-supply = <&vph>; - vdd_l24-supply = <&pm8921_s1>; - vdd_l25-supply = <&pm8921_s1>; - vdd_l26-supply = <&pm8921_s7>; - vdd_l27-supply = <&pm8921_s7>; - vdd_l28-supply = <&pm8921_s7>; - vin_lvs1_3_6-supply = <&pm8921_s4>; - vin_lvs2-supply = <&pm8921_s1>; - vin_lvs4_5_7-supply = <&pm8921_s4>; - - s1 { - regulator-always-on; - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - qcom,switch-mode-frequency = <3200000>; - bias-pull-down; - }; - - s3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - qcom,switch-mode-frequency = <4800000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <3200000>; - bias-pull-down; - regulator-always-on; - }; - - s7 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - qcom,switch-mode-frequency = <3200000>; - }; - - l3 { - regulator-min-microvolt = <3050000>; - regulator-max-microvolt = <3300000>; - bias-pull-down; - }; - - l4 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - l5 { - regulator-min-microvolt = <2750000>; - regulator-max-microvolt = <3000000>; - bias-pull-down; - regulator-boot-on; - regulator-always-on; - }; - - l6 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - l23 { - regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <1900000>; - bias-pull-down; - }; - - lvs6 { - bias-pull-down; - }; - - lvs7 { - bias-pull-down; - }; - }; - }; - - gsbi@12440000 { - status = "okay"; - qcom,mode = <GSBI_PROT_UART_W_FC>; - serial@12450000 { - label = "LS-UART1"; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&gsbi1_uart_4pins>; - }; - }; - - gsbi@12480000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; - i2c@124a0000 { - /* On Low speed expansion and Sensors */ - label = "LS-I2C0"; - status = "okay"; - lis3mdl_mag@1e { - compatible = "st,lis3mdl-magn"; - reg = <0x1e>; - vdd-supply = <&vcc3v3>; - vddio-supply = <&pm8921_s4>; - pinctrl-names = "default"; - pinctrl-0 = <&magneto_pins>; - interrupt-parent = <&tlmm_pinmux>; - - st,drdy-int-pin = <2>; - interrupts = <48 IRQ_TYPE_EDGE_RISING>, /* DRDY line */ - <31 IRQ_TYPE_EDGE_RISING>; /* INT */ - }; - }; - }; - - gsbi@16200000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; - i2c@16280000 { - /* On Low speed expansion */ - status = "okay"; - label = "LS-I2C1"; - clock-frequency = <200000>; - eeprom@52 { - compatible = "atmel,24c128"; - reg = <0x52>; - pagesize = <64>; - }; - }; - }; - - gsbi@16300000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; - i2c@16380000 { - /* On High speed expansion */ - label = "HS-CAM-I2C3"; - status = "okay"; - }; - }; - - gsbi@1a200000 { - status = "okay"; - spi@1a280000 { - /* On Low speed expansion */ - label = "LS-SPI0"; - status = "okay"; - }; - }; - - /* DEBUG UART */ - gsbi@16600000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C_UART>; - serial@16640000 { - label = "LS-UART0"; - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&gsbi7_uart_2pins>; - }; - - i2c@16680000 { - /* On High speed expansion */ - status = "okay"; - label = "HS-CAM-I2C2"; - }; - }; - - leds { - pinctrl-names = "default"; - pinctrl-0 = <&user_leds>, <&mpp_leds>; - - compatible = "gpio-leds"; - - user-led0 { - label = "user0-led"; - gpios = <&tlmm_pinmux 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - - user-led1 { - label = "user1-led"; - gpios = <&tlmm_pinmux 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; - - user-led2 { - label = "user2-led"; - gpios = <&tlmm_pinmux 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc1"; - default-state = "off"; - }; - - user-led3 { - label = "user3-led"; - gpios = <&tlmm_pinmux 11 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "none"; - default-state = "off"; - }; - - wifi-led { - label = "WiFi-led"; - gpios = <&pm8921_mpps 7 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - - bt-led { - label = "BT-led"; - gpios = <&pm8921_mpps 8 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - - pci@1b500000 { - status = "okay"; - vdda-supply = <&pm8921_s3>; - vdda_phy-supply = <&pm8921_lvs6>; - vdda_refclk-supply = <&vcc3v3>; - pinctrl-0 = <&pcie_pins>; - pinctrl-names = "default"; - perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; - }; - - phy@1b400000 { - status = "okay"; - }; - - sata@29000000 { - status = "okay"; - target-supply = <&pm8921_lvs7>; - }; - - /* OTG */ - phy@12500000 { - status = "okay"; - dr_mode = "peripheral"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l4>; - }; - - phy@12520000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - - phy@12530000 { - status = "okay"; - vddcx-supply = <&pm8921_s3>; - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l23>; - }; - - gadget@12500000 { - status = "okay"; - }; - - /* OTG */ - usb@12500000 { - status = "okay"; - }; - - usb@12520000 { - status = "okay"; - }; - - usb@12530000 { - status = "okay"; - }; - - amba { - /* eMMC */ - sdcc@12400000 { - status = "okay"; - vmmc-supply = <&pm8921_l5>; - vqmmc-supply = <&pm8921_s4>; - }; - - /* External micro SD card */ - sdcc@12180000 { - status = "okay"; - vmmc-supply = <&pm8921_l6>; - pinctrl-names = "default"; - pinctrl-0 = <&card_detect>; - cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi new file mode 100644 index 0000000..a3efb97 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi @@ -0,0 +1,52 @@ +&tlmm_pinmux { + card_detect: card-detect { + mux { + pins = "gpio26"; + function = "gpio"; + bias-disable; + }; + }; + + pcie_pins: pcie-pinmux { + mux { + pins = "gpio27"; + function = "gpio"; + }; + conf { + pins = "gpio27"; + drive-strength = <12>; + bias-disable; + }; + }; + + user_leds: user-leds { + mux { + pins = "gpio3", "gpio7", "gpio10", "gpio11"; + function = "gpio"; + }; + + conf { + pins = "gpio3", "gpio7", "gpio10", "gpio11"; + function = "gpio"; + output-low; + }; + }; + + magneto_pins: magneto-pins { + mux { + pins = "gpio31", "gpio48"; + function = "gpio"; + bias-disable; + }; + }; +}; + +&pm8921_mpps { + mpp_leds: mpp-leds { + pinconf { + pins = "mpp7", "mpp8"; + function = "digital"; + output-low; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts new file mode 100644 index 0000000..7df0108 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts @@ -0,0 +1,349 @@ +#include "qcom-apq8064-v2.0.dtsi" +#include "qcom-apq8064-arrow-sd-600eval-pins.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Arrow Electronics, APQ8064 SD_600eval"; + compatible = "arrow,sd_600eval", "qcom,apq8064"; + + aliases { + serial0 = &gsbi7_serial; + serial1 = &gsbi1_serial; + i2c0 = &gsbi2_i2c; + i2c1 = &gsbi3_i2c; + i2c2 = &gsbi4_i2c; + i2c3 = &gsbi7_i2c; + spi0 = &gsbi5_spi; + }; + + regulators { + compatible = "simple-bus"; + vph: regulator-fixed@1 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <4500000>; + regulator-name = "VPH"; + regulator-type = "voltage"; + regulator-boot-on; + }; + + /* on board fixed 3.3v supply */ + vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + }; + + soc { + rpm@108000 { + regulators { + vdd_s1-supply = <&vph>; + vdd_s2-supply = <&vph>; + vdd_s3-supply = <&vph>; + vdd_s4-supply = <&vph>; + vdd_s5-supply = <&vph>; + vdd_s6-supply = <&vph>; + vdd_s7-supply = <&vph>; + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l3_l15_l17-supply = <&vph>; + vdd_l4_l14-supply = <&vph>; + vdd_l5_l8_l16-supply = <&vph>; + vdd_l6_l7-supply = <&vph>; + vdd_l9_l11-supply = <&vph>; + vdd_l10_l22-supply = <&vph>; + vdd_l21_l23_l29-supply = <&vph>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s1>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + s3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + qcom,switch-mode-frequency = <4800000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + regulator-always-on; + }; + + s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + l3 { + regulator-min-microvolt = <3050000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + l4 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + l5 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + regulator-boot-on; + regulator-always-on; + }; + + l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + l23 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + + lvs6 { + bias-pull-down; + }; + + lvs7 { + bias-pull-down; + }; + }; + }; + + gsbi@12440000 { + status = "okay"; + qcom,mode = <GSBI_PROT_UART_W_FC>; + serial@12450000 { + label = "LS-UART1"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&gsbi1_uart_4pins>; + }; + }; + + gsbi@12480000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + i2c@124a0000 { + /* On Low speed expansion and Sensors */ + label = "LS-I2C0"; + status = "okay"; + lis3mdl_mag@1e { + compatible = "st,lis3mdl-magn"; + reg = <0x1e>; + vdd-supply = <&vcc3v3>; + vddio-supply = <&pm8921_s4>; + pinctrl-names = "default"; + pinctrl-0 = <&magneto_pins>; + interrupt-parent = <&tlmm_pinmux>; + + st,drdy-int-pin = <2>; + interrupts = <48 IRQ_TYPE_EDGE_RISING>, /* DRDY line */ + <31 IRQ_TYPE_EDGE_RISING>; /* INT */ + }; + }; + }; + + gsbi@16200000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + i2c@16280000 { + /* On Low speed expansion */ + status = "okay"; + label = "LS-I2C1"; + clock-frequency = <200000>; + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <64>; + }; + }; + }; + + gsbi@16300000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + i2c@16380000 { + /* On High speed expansion */ + label = "HS-CAM-I2C3"; + status = "okay"; + }; + }; + + gsbi@1a200000 { + status = "okay"; + spi@1a280000 { + /* On Low speed expansion */ + label = "LS-SPI0"; + status = "okay"; + }; + }; + + /* DEBUG UART */ + gsbi@16600000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C_UART>; + serial@16640000 { + label = "LS-UART0"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&gsbi7_uart_2pins>; + }; + + i2c@16680000 { + /* On High speed expansion */ + status = "okay"; + label = "HS-CAM-I2C2"; + }; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds>, <&mpp_leds>; + + compatible = "gpio-leds"; + + user-led0 { + label = "user0-led"; + gpios = <&tlmm_pinmux 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + user-led1 { + label = "user1-led"; + gpios = <&tlmm_pinmux 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + user-led2 { + label = "user2-led"; + gpios = <&tlmm_pinmux 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + user-led3 { + label = "user3-led"; + gpios = <&tlmm_pinmux 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + }; + + wifi-led { + label = "WiFi-led"; + gpios = <&pm8921_mpps 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + bt-led { + label = "BT-led"; + gpios = <&pm8921_mpps 8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + pci@1b500000 { + status = "okay"; + vdda-supply = <&pm8921_s3>; + vdda_phy-supply = <&pm8921_lvs6>; + vdda_refclk-supply = <&vcc3v3>; + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + }; + + phy@1b400000 { + status = "okay"; + }; + + sata@29000000 { + status = "okay"; + target-supply = <&pm8921_lvs7>; + }; + + /* OTG */ + phy@12500000 { + status = "okay"; + dr_mode = "peripheral"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + + phy@12520000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + phy@12530000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + gadget@12500000 { + status = "okay"; + }; + + /* OTG */ + usb@12500000 { + status = "okay"; + }; + + usb@12520000 { + status = "okay"; + }; + + usb@12530000 { + status = "okay"; + }; + + amba { + /* eMMC */ + sdcc@12400000 { + status = "okay"; + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + }; + + /* External micro SD card */ + sdcc@12180000 { + status = "okay"; + vmmc-supply = <&pm8921_l6>; + pinctrl-names = "default"; + pinctrl-0 = <&card_detect>; + cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>; + }; + }; + }; +};

[1/2] ARM: dts: apq8064: rename db600c to SD_600eval

Commit Message

Patch