| Message ID | 20230703-topic-8250_qup_icc-v1-2-fea39aa07525@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | Add interconnects to QUPs on SM8250 | expand |
On 03/07/2023 16:38, Konrad Dybcio wrote: > On 3.07.2023 16:01, Krzysztof Kozlowski wrote: >> On 03/07/2023 15:31, Konrad Dybcio wrote: >>> Some SoCs (like SM8150 and SM8250) don't seem to provide a qup-core path. >>> Allow such case. >>> >>> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> >>> --- >>> .../bindings/serial/qcom,serial-geni-qcom.yaml | 26 +++++++++++++++------- >>> 1 file changed, 18 insertions(+), 8 deletions(-) >>> >>> diff --git a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml >>> index dd33794b3534..a0acba57bc06 100644 >>> --- a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml >>> +++ b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml >>> @@ -25,14 +25,6 @@ properties: >>> clock-names: >>> const: se >>> >>> - interconnects: >>> - maxItems: 2 >>> - >>> - interconnect-names: >>> - items: >>> - - const: qup-core >>> - - const: qup-config >> >> Instead please keep the definition of the fields in top-level properties >> with the widest constraints, e.g. >> interconnects: >> minItems: 1 >> maxItems: 2 >> >> interconnect-names: >> minItems: 1 >> items: >> - const: qup-core >> - const: qup-config > Sadly the issue here is that the qup-config path exists, but qup-core > doesn't. Ah, right, then: interconnect-names: oneOf: - items: .... - items: ... Best regards, Krzysztof
On Mon, 03 Jul 2023 15:31:11 +0200, Konrad Dybcio wrote: > Some SoCs (like SM8150 and SM8250) don't seem to provide a qup-core path. > Allow such case. > > Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> > --- > .../bindings/serial/qcom,serial-geni-qcom.yaml | 26 +++++++++++++++------- > 1 file changed, 18 insertions(+), 8 deletions(-) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.example.dtb: geniqup@8c0000: serial@a88000: More than one condition true in oneOf schema: {'$filename': '/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml', '$id': 'http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#', '$schema': 'http://devicetree.org/meta-schemas/core.yaml#', 'allOf': [{'$ref': '/schemas/serial/serial.yaml#'}, {'oneOf': [{'required': ['interrupts']}, {'required': ['interrupts-extended']}]}], 'oneOf': [{'patternProperties': {'pinctrl-[0-9]+': True}, 'properties': {'$nodename': True, 'bootph-all': True, 'bootph-pre-ram': True, 'bootph-pre-sram': True, 'bootph-some-ram': True, 'bootph-verify': True, 'interconnect-names': {'items': [{'const': 'qup-config'}], 'maxItems': 1, 'minItems': 1, 'type': 'array'}, 'interconnects': {'maxItems': 1, 'minItems': 1}, 'phandle': True, 'pinctrl-names': True, 'secure-status': True, 'status': True}}, {'patternProperties': {'pinctrl-[0-9]+': True}, 'properties': {'$nodename': True, 'bootph-all': True, 'bootph-pre-ram': True, 'bootph-pre-sram': True, 'bootph-some-ram': True, 'bootph-verify': True, 'interconnect-names': {'items': [{'const': 'qup-core'}, {'const': 'qup-config'}], 'maxItems': 2, 'minItems': 2, 'type': 'array'}, 'interconnects': {'maxItems': 2, 'minItems': 2}, 'phandle': True, 'pinctrl-names': True, 'secure-status': True, 'status': True}}], 'properties': {'$nodename': True, 'assigned-clock-parents': True, 'assigned-clock-rates': True, 'assigned-clocks': True, 'bootph-all': True, 'bootph-pre-ram': True, 'bootph-pre-sram': True, 'bootph-some-ram': True, 'bootph-verify': True, 'clock-names': {'items': [{'const': 'se'}], 'maxItems': 1, 'minItems': 1, 'type': 'array'}, 'clocks': {'maxItems': 1, 'minItems': 1}, 'compatible': {'items': [{'enum': ['qcom,geni-uart', 'qcom,geni-debug-uart']}], 'maxItems': 1, 'minItems': 1, 'type': 'array'}, 'interrupt-parent': True, 'interrupts': {'maxItems': 2, 'minItems': 1, 'type': 'array'}, 'interrupts-extended': {'maxItems': 2, 'minItems': 1, 'type': 'array'}, 'operating-points-v2': True, 'phandle': True, 'pinctrl-0': True, 'pinctrl-1': True, 'pinctrl-names': {'items': [{'const': 'default'}, {'const': 'sleep'}], 'maxItems': 2, 'minItems': 1, 'type': 'array'}, 'power-domains': {'maxItems': 1, 'minItems': 1}, 'reg': {'maxItems': 1, 'minItems': 1}, 'secure-status': True, 'status': True}, 'required': ['compatible', 'clocks', 'clock-names', 'reg'], 'select': {'properties': {'compatible': {'contains': {'enum': ['qcom,geni-debug-uart', 'qcom,geni-uart']}}}, 'required': ['compatible']}, 'title': 'Qualcomm Geni based QUP UART interface', 'type': 'object', 'unevaluatedProperties': False} from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.example.dtb: serial@a88000: More than one condition true in oneOf schema: {'$filename': '/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml', '$id': 'http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#', '$schema': 'http://devicetree.org/meta-schemas/core.yaml#', 'allOf': [{'$ref': '/schemas/serial/serial.yaml#'}, {'oneOf': [{'required': ['interrupts']}, {'required': ['interrupts-extended']}]}], 'oneOf': [{'patternProperties': {'pinctrl-[0-9]+': True}, 'properties': {'$nodename': True, 'bootph-all': True, 'bootph-pre-ram': True, 'bootph-pre-sram': True, 'bootph-some-ram': True, 'bootph-verify': True, 'interconnect-names': {'items': [{'const': 'qup-config'}], 'maxItems': 1, 'minItems': 1, 'type': 'array'}, 'interconnects': {'maxItems': 1, 'minItems': 1}, 'phandle': True, 'pinctrl-names': True, 'secure-status': True, 'status': True}}, {'patternProperties': {'pinctrl-[0-9]+': True}, 'properties': {'$nodename': True, 'bootph-all': True, 'bootph-pre-ram': True, 'bootph-pre-sram': True, 'bootph-some-ram': True, 'bootph-verify': True, 'interconnect-names': {'items': [{'const': 'qup-core'}, {'const': 'qup-config'}], 'maxItems': 2, 'minItems': 2, 'type': 'array'}, 'interconnects': {'maxItems': 2, 'minItems': 2}, 'phandle': True, 'pinctrl-names': True, 'secure-status': True, 'status': True}}], 'properties': {'$nodename': True, 'assigned-clock-parents': True, 'assigned-clock-rates': True, 'assigned-clocks': True, 'bootph-all': True, 'bootph-pre-ram': True, 'bootph-pre-sram': True, 'bootph-some-ram': True, 'bootph-verify': True, 'clock-names': {'items': [{'const': 'se'}], 'maxItems': 1, 'minItems': 1, 'type': 'array'}, 'clocks': {'maxItems': 1, 'minItems': 1}, 'compatible': {'items': [{'enum': ['qcom,geni-uart', 'qcom,geni-debug-uart']}], 'maxItems': 1, 'minItems': 1, 'type': 'array'}, 'interrupt-parent': True, 'interrupts': {'maxItems': 2, 'minItems': 1, 'type': 'array'}, 'interrupts-extended': {'maxItems': 2, 'minItems': 1, 'type': 'array'}, 'operating-points-v2': True, 'phandle': True, 'pinctrl-0': True, 'pinctrl-1': True, 'pinctrl-names': {'items': [{'const': 'default'}, {'const': 'sleep'}], 'maxItems': 2, 'minItems': 1, 'type': 'array'}, 'power-domains': {'maxItems': 1, 'minItems': 1}, 'reg': {'maxItems': 1, 'minItems': 1}, 'secure-status': True, 'status': True}, 'required': ['compatible', 'clocks', 'clock-names', 'reg'], 'select': {'properties': {'compatible': {'contains': {'enum': ['qcom,geni-debug-uart', 'qcom,geni-uart']}}}, 'required': ['compatible']}, 'title': 'Qualcomm Geni based QUP UART interface', 'type': 'object', 'unevaluatedProperties': False} from schema $id: http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230703-topic-8250_qup_icc-v1-2-fea39aa07525@linaro.org The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml index dd33794b3534..a0acba57bc06 100644 --- a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml +++ b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml @@ -25,14 +25,6 @@ properties: clock-names: const: se - interconnects: - maxItems: 2 - - interconnect-names: - items: - - const: qup-core - - const: qup-config - interrupts: minItems: 1 items: @@ -56,6 +48,24 @@ properties: reg: maxItems: 1 +oneOf: + - properties: + interconnects: + maxItems: 1 + + interconnect-names: + items: + - const: qup-config + + - properties: + interconnects: + minItems: 2 + + interconnect-names: + items: + - const: qup-core + - const: qup-config + required: - compatible - clocks
Some SoCs (like SM8150 and SM8250) don't seem to provide a qup-core path. Allow such case. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- .../bindings/serial/qcom,serial-geni-qcom.yaml | 26 +++++++++++++++------- 1 file changed, 18 insertions(+), 8 deletions(-)