@@ -103,6 +103,19 @@ patternProperties:
the boot ROM or similar restrictions.
$ref: /schemas/types.yaml#/definitions/flag
+ nand-no-bbm-quirk:
+ description:
+ Some controllers with pipelined ECC engines override the BBM marker with
+ data or ECC bytes, thus making bad block detection through bad block marker
+ impossible. Let's flag those chips so the core knows it shouldn't check the
+ BBM and consider all blocks good.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ nand-skip-bbtscan:
+ description:
+ This option skips the BBT scan during initialization.
+ $ref: /schemas/types.yaml#/definitions/flag
+
nand-rb:
description:
Contains the native Ready/Busy IDs.
A NAND chip can contain a different data format then the MTD framework expects in the erase blocks for the Bad Block Table(BBT). Result is a failed probe, while nothing wrong with the hardware. Some MTD flags need to be set to gain access again. Skip the automatic BBT scan with the NAND_SKIP_BBTSCAN option so that the original content is unchanged during the driver probe. The NAND_NO_BBM_QUIRK option allows us to erase bad blocks with the nand_erase_nand() function and the flash_erase command. Add nand-skip-bbtscan and nand-no-bbm-quirk Device Tree options, so the user has the "freedom of choice" by neutral access mode to read and write in whatever format is needed. Signed-off-by: Johan Jonker <jbx6244@gmail.com> --- Previous discussion: [PATCH v3 3/3] mtd: rawnand: rockchip-nand-controller: add skipbbt option https://lore.kernel.org/linux-mtd/1618382560.2326931.1689261435022.JavaMail.zimbra@nod.at/ --- .../devicetree/bindings/mtd/nand-controller.yaml | 13 +++++++++++++ 1 file changed, 13 insertions(+) -- 2.30.2