@@ -20,6 +20,8 @@
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
#include <dt-bindings/reset/qcom,sdm845-pdc.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/soc/qcom,apr.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/thermal/thermal.h>
/ {
@@ -3781,6 +3783,126 @@ wifi: wifi@18800000 {
status = "disabled";
};
+ remoteproc_adsp: remoteproc@62400000 {
+ compatible = "qcom,sc7180-adsp-pas";
+ reg = <0 0x62400000 0 0x100>;
+
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd SC7180_LCX>,
+ <&rpmhpd SC7180_LMX>;
+ power-domain-names = "lcx", "lmx";
+
+ qcom,qmp = <&aoss_qmp>;
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+ label = "lpass";
+ qcom,remote-pid = <2>;
+ mboxes = <&apss_shared 8>;
+
+ apr {
+ compatible = "qcom,apr-v2";
+ qcom,glink-channels = "apr_audio_svc";
+ qcom,domain = <APR_DOMAIN_ADSP>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ service@3 {
+ compatible = "qcom,q6core";
+ reg = <APR_SVC_ADSP_CORE>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+ };
+
+ q6afe: service@4 {
+ compatible = "qcom,q6afe";
+ reg = <APR_SVC_AFE>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+ q6afedai: dais {
+ compatible = "qcom,q6afe-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ };
+
+ q6afecc: clock-controller {
+ compatible = "qcom,q6afe-clocks";
+ #clock-cells = <2>;
+ };
+ };
+
+ q6asm: service@7 {
+ compatible = "qcom,q6asm";
+ reg = <APR_SVC_ASM>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+ q6asmdai: dais {
+ compatible = "qcom,q6asm-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ iommus = <&apps_smmu 0x1001 0x0>;
+ };
+ };
+
+ q6adm: service@8 {
+ compatible = "qcom,q6adm";
+ reg = <APR_SVC_ADM>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+ q6routing: routing {
+ compatible = "qcom,q6adm-routing";
+ #sound-dai-cells = <0>;
+ };
+ };
+ };
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "adsp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x1003 0x0>;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x1004 0x0>;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x1005 0x0>;
+ qcom,nsessions = <5>;
+ };
+ };
+ };
+ };
+
lpasscc: clock-controller@62d00000 {
compatible = "qcom,sc7180-lpasscorecc";
reg = <0 0x62d00000 0 0x50000>,
sc7180 has an ADSP remoteproc that exclusively controls the audio hardware on devices that use Qualcomm firmware. Add it along with the relevant audio services. Signed-off-by: Nikita Travkin <nikita@trvn.ru> --- v2: rename service nodes according to the schema, reorder properties --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 122 +++++++++++++++++++++++++++++++++++ 1 file changed, 122 insertions(+)