diff mbox series

[4/6] regulator: qcom_spmi: Add PM8019 regulators

Message ID 20230912-spmi-pm8909-v1-4-ba4b3bfaf87d@gerhold.net
State Accepted
Commit 5b30cb2a317a8e2636f724e8ebf5cbe3849e786e
Headers show
Series regulator: qcom_spmi: Add PM8909, PM8019 and PMA8084 | expand

Commit Message

Stephan Gerhold Sept. 12, 2023, 7:49 a.m. UTC 
Add the necessary definitions for the PM8019 PMIC to the
qcom_spmi-regulator driver to allow reading the actual voltages applied
to the hardware at runtime. This is mainly intended for debugging since
the regulators are usually controlled through the RPM firmware (via
qcom_smd-regulator).

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 drivers/regulator/qcom_spmi-regulator.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
diff mbox series

Patch

diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 3c7ab6416b61..13fe1c73a547 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -2118,6 +2118,28 @@  static const struct spmi_regulator_data pm8005_regulators[] = {
 	{ }
 };
 
+static const struct spmi_regulator_data pm8019_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1", },
+	{ "s2", 0x1700, "vdd_s2", },
+	{ "s3", 0x1a00, "vdd_s3", },
+	{ "s4", 0x1d00, "vdd_s4", },
+	{ "l1", 0x4000, "vdd_l1", },
+	{ "l2", 0x4100, "vdd_l2_l3", },
+	{ "l3", 0x4200, "vdd_l2_l3", },
+	{ "l4", 0x4300, "vdd_l4_l5_l6", },
+	{ "l5", 0x4400, "vdd_l4_l5_l6", },
+	{ "l6", 0x4500, "vdd_l4_l5_l6", },
+	{ "l7", 0x4600, "vdd_l7_l8_l11", },
+	{ "l8", 0x4700, "vdd_l7_l8_l11", },
+	{ "l9", 0x4800, "vdd_l9", },
+	{ "l10", 0x4900, "vdd_l10", },
+	{ "l11", 0x4a00, "vdd_l7_l8_l11", },
+	{ "l12", 0x4b00, "vdd_l12", },
+	{ "l13", 0x4c00, "vdd_l13_l14", },
+	{ "l14", 0x4d00, "vdd_l13_l14", },
+	{ }
+};
+
 static const struct spmi_regulator_data pm8226_regulators[] = {
 	{ "s1", 0x1400, "vdd_s1", },
 	{ "s2", 0x1700, "vdd_s2", },
@@ -2378,6 +2400,7 @@  static const struct of_device_id qcom_spmi_regulator_match[] = {
 	{ .compatible = "qcom,pm660l-regulators", .data = &pm660l_regulators },
 	{ .compatible = "qcom,pm8004-regulators", .data = &pm8004_regulators },
 	{ .compatible = "qcom,pm8005-regulators", .data = &pm8005_regulators },
+	{ .compatible = "qcom,pm8019-regulators", .data = &pm8019_regulators },
 	{ .compatible = "qcom,pm8226-regulators", .data = &pm8226_regulators },
 	{ .compatible = "qcom,pm8841-regulators", .data = &pm8841_regulators },
 	{ .compatible = "qcom,pm8909-regulators", .data = &pm8909_regulators },