diff mbox series

[1/4] ALSA: scarlett2: Default mixer driver to enabled

Message ID 89600a35b40307f2766578ad1ca2f21801286b58.1694705811.git.g@b4.vu
State Accepted
Commit bc83058f598757a908b30f8f536338cb1478ab5b
Headers show
Series ALSA: scarlett2: Driver updates | expand

Commit Message

Geoffrey D. Bennett Sept. 14, 2023, 5:31 p.m. UTC 
Early versions of this mixer driver did not work on all hardware, so
out of caution the driver was disabled by default and had to be
explicitly enabled with device_setup=1.

Since commit 764fa6e686e0 ("ALSA: usb-audio: scarlett2: Fix device
hang with ehci-pci") no more problems of this nature have been
reported. Therefore, enable the driver by default but provide a new
device_setup option to disable the driver in case that is needed.

- device_setup value of 0 now means "enable" rather than "disable".
- device_setup value of 1 is now ignored.
- device_setup value of 4 now means "disable".

Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
---
 sound/usb/mixer_scarlett_gen2.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/sound/usb/mixer_scarlett_gen2.c b/sound/usb/mixer_scarlett_gen2.c
index 9d11bb08667e..ecd148ba6908 100644
--- a/sound/usb/mixer_scarlett_gen2.c
+++ b/sound/usb/mixer_scarlett_gen2.c
@@ -141,12 +141,12 @@ 
 
 #include "mixer_scarlett_gen2.h"
 
-/* device_setup value to enable */
-#define SCARLETT2_ENABLE 0x01
-
 /* device_setup value to allow turning MSD mode back on */
 #define SCARLETT2_MSD_ENABLE 0x02
 
+/* device_setup value to disable this mixer driver */
+#define SCARLETT2_DISABLE 0x04
+
 /* some gui mixers can't handle negative ctl values */
 #define SCARLETT2_VOLUME_BIAS 127
 
@@ -4172,19 +4172,20 @@  int snd_scarlett_gen2_init(struct usb_mixer_interface *mixer)
 	if (!mixer->protocol)
 		return 0;
 
-	if (!(chip->setup & SCARLETT2_ENABLE)) {
+	if (chip->setup & SCARLETT2_DISABLE) {
 		usb_audio_info(chip,
-			"Focusrite Scarlett Gen 2/3 Mixer Driver disabled; "
-			"use options snd_usb_audio vid=0x%04x pid=0x%04x "
-			"device_setup=1 to enable and report any issues "
-			"to g@b4.vu",
+			"Focusrite Scarlett Gen 2/3 Mixer Driver disabled "
+			"by modprobe options (snd_usb_audio "
+			"vid=0x%04x pid=0x%04x device_setup=%d)\n",
 			USB_ID_VENDOR(chip->usb_id),
-			USB_ID_PRODUCT(chip->usb_id));
+			USB_ID_PRODUCT(chip->usb_id),
+			SCARLETT2_DISABLE);
 		return 0;
 	}
 
 	usb_audio_info(chip,
-		"Focusrite Scarlett Gen 2/3 Mixer Driver enabled pid=0x%04x",
+		"Focusrite Scarlett Gen 2/3 Mixer Driver enabled (pid=0x%04x); "
+		"report any issues to g@b4.vu",
 		USB_ID_PRODUCT(chip->usb_id));
 
 	err = snd_scarlett_gen2_controls_create(mixer);