diff mbox series

[v3,2/3] iio: imu: mpu6050: add level shifter flag

Message ID 20230927173245.2151083-3-andreas@kemnade.info
State Superseded
Headers show
Series ARM: omap: omap4-embt2ws: Add IMU on control unit | expand

Commit Message

Andreas Kemnade Sept. 27, 2023, 5:32 p.m. UTC
Some boards fail in magnetometer probe if level shifter flag is not set,
definition was found in the vendor Linux kernel v3.0.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
 drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c  | 13 +++++++++++++
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c |  3 +++
 drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h  |  1 +
 3 files changed, 17 insertions(+)

Comments

Jonathan Cameron Sept. 30, 2023, 4:50 p.m. UTC | #1
On Wed, 27 Sep 2023 19:08:31 +0000
Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@tdk.com> wrote:

> Hello,
> 
> looks good for me.
> 
> Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>

Applied patches 1 and 2 to the togreg branch of iio.git which I will
initially push out as testing to let 0-day poke at it,

Thanks,

Jonathan

> 
> Thanks,
> JB
> 
> 
> From: Andreas Kemnade <andreas@kemnade.info>
> Sent: Wednesday, September 27, 2023 19:32
> To: jic23@kernel.org <jic23@kernel.org>; lars@metafoo.de <lars@metafoo.de>; robh+dt@kernel.org <robh+dt@kernel.org>; krzysztof.kozlowski+dt@linaro.org <krzysztof.kozlowski+dt@linaro.org>; conor+dt@kernel.org <conor+dt@kernel.org>; bcousson@baylibre.com <bcousson@baylibre.com>; tony@atomide.com <tony@atomide.com>; andreas@kemnade.info <andreas@kemnade.info>; chenhuiz@axis.com <chenhuiz@axis.com>; Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@tdk.com>; andy.shevchenko@gmail.com <andy.shevchenko@gmail.com>; linux-iio@vger.kernel.org <linux-iio@vger.kernel.org>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-omap@vger.kernel.org <linux-omap@vger.kernel.org>
> Subject: [PATCH v3 2/3] iio: imu: mpu6050: add level shifter flag 
>  
> Some boards fail in magnetometer probe if level shifter flag is not set, definition was found in the vendor Linux kernel v3. 0. Signed-off-by: Andreas Kemnade <andreas@ kemnade. info> Reviewed-by: Andy Shevchenko <andy. shevchenko@ gmail. com> 
> ZjQcmQRYFpfptBannerStart
> This Message Is From an External Sender 
> This message came from outside your organization. 
>  
> ZjQcmQRYFpfptBannerEnd
> Some boards fail in magnetometer probe if level shifter flag is not set,
> definition was found in the vendor Linux kernel v3.0.
> 
> Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> ---
>  drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c  | 13 +++++++++++++
>  drivers/iio/imu/inv_mpu6050/inv_mpu_core.c |  3 +++
>  drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h  |  1 +
>  3 files changed, 17 insertions(+)
> 
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
> index 7327e5723f961..8a7f2911905af 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
> @@ -71,6 +71,19 @@ int inv_mpu_aux_init(const struct inv_mpu6050_state *st)
>  	unsigned int val;
>  	int ret;
>  
> +	/*
> +	 * Code based on the vendor Linux kernel v3.0,
> +	 * the exact meaning is unknown.
> +	 */
> +	if (st->chip_type == INV_MPU9150) {
> +		unsigned int mask = BIT(7);
> +
> +		val = st->level_shifter ? mask : 0;
> +		ret = regmap_update_bits(st->map, 0x1, mask, val);
> +		if (ret)
> +			return ret;
> +	}
> +
>  	/* configure i2c master */
>  	val = INV_MPU6050_BITS_I2C_MST_CLK_400KHZ |
>  			INV_MPU6050_BIT_WAIT_FOR_ES;
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> index 29f906c884bd8..3fbeef1a70186 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
> @@ -17,6 +17,7 @@
>  #include <linux/regulator/consumer.h>
>  #include <linux/pm.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/property.h>
>  
>  #include <linux/iio/common/inv_sensors_timestamp.h>
>  #include <linux/iio/iio.h>
> @@ -1495,6 +1496,8 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
>  	st->irq = irq;
>  	st->map = regmap;
>  
> +	st->level_shifter = device_property_read_bool(dev,
> +						      "invensense,level-shifter");
>  	pdata = dev_get_platdata(dev);
>  	if (!pdata) {
>  		result = iio_read_mount_matrix(dev, &st->orientation);
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> index ed5a96e78df05..7eba1439c8093 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
> @@ -203,6 +203,7 @@ struct inv_mpu6050_state {
>  	s32 magn_raw_to_gauss[3];
>  	struct iio_mount_matrix magn_orient;
>  	unsigned int suspended_sensors;
> +	bool level_shifter;
>  	u8 *data;
>  };
>
diff mbox series

Patch

diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
index 7327e5723f961..8a7f2911905af 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c
@@ -71,6 +71,19 @@  int inv_mpu_aux_init(const struct inv_mpu6050_state *st)
 	unsigned int val;
 	int ret;
 
+	/*
+	 * Code based on the vendor Linux kernel v3.0,
+	 * the exact meaning is unknown.
+	 */
+	if (st->chip_type == INV_MPU9150) {
+		unsigned int mask = BIT(7);
+
+		val = st->level_shifter ? mask : 0;
+		ret = regmap_update_bits(st->map, 0x1, mask, val);
+		if (ret)
+			return ret;
+	}
+
 	/* configure i2c master */
 	val = INV_MPU6050_BITS_I2C_MST_CLK_400KHZ |
 			INV_MPU6050_BIT_WAIT_FOR_ES;
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 29f906c884bd8..3fbeef1a70186 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -17,6 +17,7 @@ 
 #include <linux/regulator/consumer.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
+#include <linux/property.h>
 
 #include <linux/iio/common/inv_sensors_timestamp.h>
 #include <linux/iio/iio.h>
@@ -1495,6 +1496,8 @@  int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
 	st->irq = irq;
 	st->map = regmap;
 
+	st->level_shifter = device_property_read_bool(dev,
+						      "invensense,level-shifter");
 	pdata = dev_get_platdata(dev);
 	if (!pdata) {
 		result = iio_read_mount_matrix(dev, &st->orientation);
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index ed5a96e78df05..7eba1439c8093 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -203,6 +203,7 @@  struct inv_mpu6050_state {
 	s32 magn_raw_to_gauss[3];
 	struct iio_mount_matrix magn_orient;
 	unsigned int suspended_sensors;
+	bool level_shifter;
 	u8 *data;
 };