diff mbox series

[1/5] ASoC: ti: Convert N810 ASoC to GPIO descriptors

Message ID 20230926-descriptors-asoc-ti-v1-1-60cf4f8adbc5@linaro.org
State Accepted
Commit 22041ed154aaf89f31306014a305dde516c308ea
Headers show
Series GPIO descriptors for TI ASoC codecs | expand

Commit Message

Linus Walleij Sept. 26, 2023, 1:25 p.m. UTC 
The N810 uses GPIO descriptors pretty much exclusively, but not
for ASoC, so let's fix it. Register the pins in a descriptor table
in the machine since the ASoC device is not using device tree.

Use static locals for the GPIO descriptors because I'm not able
to experient with better state storage on any real hardware. Others
using the N810 can come afterwards and improve this.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/mach-omap2/board-n8x0.c | 10 ++++++++++
 sound/soc/ti/n810.c              | 31 +++++++++++++++++--------------
 2 files changed, 27 insertions(+), 14 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 8e3b5068d4ab..31755a378c73 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -498,6 +498,15 @@  struct menelaus_platform_data n8x0_menelaus_platform_data = {
 	.late_init = n8x0_menelaus_late_init,
 };
 
+static struct gpiod_lookup_table nokia810_asoc_gpio_table = {
+	.dev_id = "soc-audio",
+	.table = {
+		GPIO_LOOKUP("gpio-0-15", 10, "headset", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-80-111", 21, "speaker", GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
 static int __init n8x0_late_initcall(void)
 {
 	if (!board_caps)
@@ -505,6 +514,7 @@  static int __init n8x0_late_initcall(void)
 
 	n8x0_mmc_init();
 	n8x0_usb_init();
+	gpiod_add_lookup_table(&nokia810_asoc_gpio_table);
 
 	return 0;
 }
diff --git a/sound/soc/ti/n810.c b/sound/soc/ti/n810.c
index ed217b34f846..71a2a90bad2b 100644
--- a/sound/soc/ti/n810.c
+++ b/sound/soc/ti/n810.c
@@ -15,14 +15,14 @@ 
 #include <sound/soc.h>
 
 #include <asm/mach-types.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 
 #include "omap-mcbsp.h"
 
-#define N810_HEADSET_AMP_GPIO	10
-#define N810_SPEAKER_AMP_GPIO	101
+static struct gpio_desc *n810_headset_amp;
+static struct gpio_desc *n810_speaker_amp;
 
 enum {
 	N810_JACK_DISABLED,
@@ -187,9 +187,9 @@  static int n810_spk_event(struct snd_soc_dapm_widget *w,
 			  struct snd_kcontrol *k, int event)
 {
 	if (SND_SOC_DAPM_EVENT_ON(event))
-		gpio_set_value(N810_SPEAKER_AMP_GPIO, 1);
+		gpiod_set_value(n810_speaker_amp, 1);
 	else
-		gpio_set_value(N810_SPEAKER_AMP_GPIO, 0);
+		gpiod_set_value(n810_speaker_amp, 0);
 
 	return 0;
 }
@@ -198,9 +198,9 @@  static int n810_jack_event(struct snd_soc_dapm_widget *w,
 			   struct snd_kcontrol *k, int event)
 {
 	if (SND_SOC_DAPM_EVENT_ON(event))
-		gpio_set_value(N810_HEADSET_AMP_GPIO, 1);
+		gpiod_set_value(n810_headset_amp, 1);
 	else
-		gpio_set_value(N810_HEADSET_AMP_GPIO, 0);
+		gpiod_set_value(n810_headset_amp, 0);
 
 	return 0;
 }
@@ -327,14 +327,19 @@  static int __init n810_soc_init(void)
 	clk_set_parent(sys_clkout2_src, func96m_clk);
 	clk_set_rate(sys_clkout2, 12000000);
 
-	if (WARN_ON((gpio_request(N810_HEADSET_AMP_GPIO, "hs_amp") < 0) ||
-		    (gpio_request(N810_SPEAKER_AMP_GPIO, "spk_amp") < 0))) {
-		err = -EINVAL;
+	n810_headset_amp = devm_gpiod_get(&n810_snd_device->dev,
+					  "headphone", GPIOD_OUT_LOW);
+	if (IS_ERR(n810_headset_amp)) {
+		err = PTR_ERR(n810_headset_amp);
 		goto err4;
 	}
 
-	gpio_direction_output(N810_HEADSET_AMP_GPIO, 0);
-	gpio_direction_output(N810_SPEAKER_AMP_GPIO, 0);
+	n810_speaker_amp = devm_gpiod_get(&n810_snd_device->dev,
+					  "speaker", GPIOD_OUT_LOW);
+	if (IS_ERR(n810_speaker_amp)) {
+		err = PTR_ERR(n810_speaker_amp);
+		goto err4;
+	}
 
 	return 0;
 err4:
@@ -351,8 +356,6 @@  static int __init n810_soc_init(void)
 
 static void __exit n810_soc_exit(void)
 {
-	gpio_free(N810_SPEAKER_AMP_GPIO);
-	gpio_free(N810_HEADSET_AMP_GPIO);
 	clk_put(sys_clkout2_src);
 	clk_put(sys_clkout2);
 	clk_put(func96m_clk);