[v2] v4l2-compliance: check errors returned by CREATE_BUFS

If VIDIOC_CREATE_BUFS is not supported by a driver, it should return
ENOTTY on all queues; so add a test to fail if ENOTTY is returned on only
one queue.

If  VIDIOC_CREATE_BUFS is supported, asymmetrically, on only one queue and
not another, then the driver should return EOPNOTSUPP for only that queue.
Fail if the driver returns EOPNOTSUPP on both queues.

Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
---
Changes since v1:
- add the ENOTTY test
- use a count instead of bool to keep track of error codes

On the wave5 driver, v4l2-compliance -d0 -v shows:
<snip>
Buffer ioctls:
        info: test buftype Video Capture Multiplanar
        info: VIDIOC_CREATE_BUFS not supported for Video Capture Multiplanar
        info: test buftype Video Output Multiplanar
    test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
    test VIDIOC_EXPBUF: OK
        info: could not test the Request API, no suitable control found
    test Requests: OK (Not Supported)

Total for wave5-dec device /dev/video0: 45, Succeeded: 45, Failed: 0, Warnings: 0


 utils/v4l2-compliance/v4l2-test-buffers.cpp | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

On 05/10/2023 04:44, Deborah Brouwer wrote:
> If VIDIOC_CREATE_BUFS is not supported by a driver, it should return
> ENOTTY on all queues; so add a test to fail if ENOTTY is returned on only
> one queue.
> 
> If  VIDIOC_CREATE_BUFS is supported, asymmetrically, on only one queue and
> not another, then the driver should return EOPNOTSUPP for only that queue.
> Fail if the driver returns EOPNOTSUPP on both queues.
> 
> Signed-off-by: Deborah Brouwer <deborah.brouwer@collabora.com>
> ---
> Changes since v1:
> - add the ENOTTY test
> - use a count instead of bool to keep track of error codes
> 
> On the wave5 driver, v4l2-compliance -d0 -v shows:
> <snip>
> Buffer ioctls:
>         info: test buftype Video Capture Multiplanar
>         info: VIDIOC_CREATE_BUFS not supported for Video Capture Multiplanar
>         info: test buftype Video Output Multiplanar
>     test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>     test VIDIOC_EXPBUF: OK
>         info: could not test the Request API, no suitable control found
>     test Requests: OK (Not Supported)
> 
> Total for wave5-dec device /dev/video0: 45, Succeeded: 45, Failed: 0, Warnings: 0
> 
> 
>  utils/v4l2-compliance/v4l2-test-buffers.cpp | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/utils/v4l2-compliance/v4l2-test-buffers.cpp b/utils/v4l2-compliance/v4l2-test-buffers.cpp
> index 6d592c9b..632da7f8 100644
> --- a/utils/v4l2-compliance/v4l2-test-buffers.cpp
> +++ b/utils/v4l2-compliance/v4l2-test-buffers.cpp
> @@ -540,6 +540,9 @@ int testReqBufs(struct node *node)
>  	bool dmabuf_valid;
>  	int ret;
>  	unsigned i, m;
> +	int crbufs_ok_cnt = 0;
> +	int crbufs_enotty_cnt = 0;
> +	int crbufs_eopnotsupp_cnt = 0;
>  
>  	node->reopen();
>  
> @@ -690,9 +693,21 @@ int testReqBufs(struct node *node)
>  
>  			ret = q.create_bufs(node, 0);
>  			if (ret == ENOTTY) {
> +				/* VIDIOC_CREATE_BUFS is not supported at all. */
> +				crbufs_enotty_cnt++;

Just count here...

> +				fail_on_test(crbufs_enotty_cnt && (crbufs_eopnotsupp_cnt + crbufs_ok_cnt));

...and move the fail_on_test to after the loop, when all the
counter values are final.

>  				warn("VIDIOC_CREATE_BUFS not supported\n");
>  				break;
>  			}
> +			if (ret == EOPNOTSUPP) {
> +				/* VIDIOC_CREATE_BUFS is supported on one queue but not the other. */
> +				fail_on_test(crbufs_eopnotsupp_cnt && !crbufs_ok_cnt);

Also move to after the loop is done.

> +				crbufs_eopnotsupp_cnt++;
> +				info("VIDIOC_CREATE_BUFS not supported for %s\n",
> +				     buftype2s(q.g_type()).c_str());
> +				break;
> +			}
> +			crbufs_ok_cnt++;
>  
>  			memset(&crbufs, 0xff, sizeof(crbufs));
>  			node->g_fmt(crbufs.format, i);

Regards,

	Hans