diff mbox series

[v4] dt-bindings: usb: gpio-sbu-mux: Make 'mode-switch' not required

Message ID 20231016131141.680517-1-festevam@gmail.com
State New
Headers show
Series [v4] dt-bindings: usb: gpio-sbu-mux: Make 'mode-switch' not required | expand

Commit Message

Fabio Estevam Oct. 16, 2023, 1:11 p.m. UTC 
From: Fabio Estevam <festevam@denx.de>

On a i.MX8QXP MEK board that has an NXP CBDTU02043 mux, there is
no mode-switch support, only orientation switch.

Make the 'mode-switch' property a non-required one.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
Changes since v3:
- Collected Conor's ack and sent it as standalone patch as the
previous patch has already been applied.

 Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml | 1 -
 1 file changed, 1 deletion(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
index b61dcf8b4aad..d3b2b666ec2a 100644
--- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
+++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml
@@ -51,7 +51,6 @@  required:
   - compatible
   - enable-gpios
   - select-gpios
-  - mode-switch
   - orientation-switch
   - port