@@ -670,6 +670,7 @@ struct mt76_testmode_ops {
struct mt76_testmode_data {
enum mt76_testmode_state state;
+ u8 txo_active; /* tx overrides are active */
u32 param_set[DIV_ROUND_UP(NUM_MT76_TM_ATTRS, 32)];
struct sk_buff *tx_skb;
@@ -684,6 +685,9 @@ struct mt76_testmode_data {
u8 tx_rate_ldpc;
u8 tx_rate_stbc;
u8 tx_ltf;
+ u8 txbw; /* specify TX bandwidth: 0 20Mhz, 1 40Mhz, 2 80Mhz, 3 160Mhz */
+ u8 tx_xmit_count; /* 0 means no-ack, 1 means one transmit, etc */
+ u8 tx_dynbw; /* 0: dynamic bw disabled, 1: dynamic bw enabled */
u8 tx_antenna_mask;
u8 tx_spe_idx;
@@ -413,7 +413,7 @@ u16 mt76_connac2_mac_tx_rate_val(struct mt76_phy *mphy,
struct ieee80211_vif *vif,
bool beacon, bool mcast);
bool mt76_connac2_mac_fill_txs(struct mt76_dev *dev, struct mt76_wcid *wcid,
- __le32 *txs_data);
+ __le32 *txs_data, struct ieee80211_tx_info *info);
bool mt76_connac2_mac_add_txs_skb(struct mt76_dev *dev, struct mt76_wcid *wcid,
int pid, __le32 *txs_data);
void mt76_connac2_mac_decode_he_radiotap(struct mt76_dev *dev,
@@ -586,7 +586,7 @@ void mt76_connac2_mac_write_txwi(struct mt76_dev *dev, __le32 *txwi,
EXPORT_SYMBOL_GPL(mt76_connac2_mac_write_txwi);
bool mt76_connac2_mac_fill_txs(struct mt76_dev *dev, struct mt76_wcid *wcid,
- __le32 *txs_data)
+ __le32 *txs_data, struct ieee80211_tx_info *info)
{
struct mt76_sta_stats *stats = &wcid->stats;
struct ieee80211_supported_band *sband;
@@ -653,6 +653,8 @@ bool mt76_connac2_mac_fill_txs(struct mt76_dev *dev, struct mt76_wcid *wcid,
rate.mcs = mt76_get_rate(mphy->dev, sband, rate.mcs, cck);
rate.legacy = sband->bitrates[rate.mcs].bitrate;
+ if (info)
+ info->status.rates[0].idx = rate.mcs;
break;
case MT_PHY_TYPE_HT:
case MT_PHY_TYPE_HT_GF:
@@ -662,6 +664,10 @@ bool mt76_connac2_mac_fill_txs(struct mt76_dev *dev, struct mt76_wcid *wcid,
rate.flags = RATE_INFO_FLAGS_MCS;
if (wcid->rate_short_gi)
rate.flags |= RATE_INFO_FLAGS_SHORT_GI;
+ if (info) {
+ info->status.rates[0].idx = rate.mcs + rate.nss * 8;
+ info->status.rates[0].flags |= IEEE80211_TX_RC_MCS;
+ }
break;
case MT_PHY_TYPE_VHT:
if (rate.mcs > 9)
@@ -670,6 +676,10 @@ bool mt76_connac2_mac_fill_txs(struct mt76_dev *dev, struct mt76_wcid *wcid,
rate.flags = RATE_INFO_FLAGS_VHT_MCS;
if (wcid->rate_short_gi)
rate.flags |= RATE_INFO_FLAGS_SHORT_GI;
+ if (info) {
+ info->status.rates[0].idx = (rate.nss << 4) | rate.mcs;
+ info->status.rates[0].flags |= IEEE80211_TX_RC_VHT_MCS;
+ }
break;
case MT_PHY_TYPE_HE_SU:
case MT_PHY_TYPE_HE_EXT_SU:
@@ -681,6 +691,8 @@ bool mt76_connac2_mac_fill_txs(struct mt76_dev *dev, struct mt76_wcid *wcid,
rate.he_gi = wcid->rate_he_gi;
rate.he_dcm = FIELD_GET(MT_TX_RATE_DCM, txrate);
rate.flags = RATE_INFO_FLAGS_HE_MCS;
+ if (info)
+ info->status.rates[0].idx = (rate.nss << 4) | rate.mcs;
break;
default:
return false;
@@ -731,7 +743,7 @@ bool mt76_connac2_mac_add_txs_skb(struct mt76_dev *dev, struct mt76_wcid *wcid,
!!(info->flags & IEEE80211_TX_STAT_ACK);
info->status.rates[0].idx = -1;
- mt76_connac2_mac_fill_txs(dev, wcid, txs_data);
+ mt76_connac2_mac_fill_txs(dev, wcid, txs_data, info);
mt76_tx_status_skb_done(dev, skb, &list);
}
mt76_tx_status_unlock(dev, &list);
@@ -677,6 +677,229 @@ mt7915_fw_util_wa_show(struct seq_file *file, void *data)
DEFINE_SHOW_ATTRIBUTE(mt7915_fw_util_wa);
+struct mt7915_txo_worker_info {
+ char *buf;
+ int sofar;
+ int size;
+};
+
+static void mt7915_txo_worker(void *wi_data, struct ieee80211_sta *sta)
+{
+ struct mt7915_txo_worker_info *wi = wi_data;
+ struct mt7915_sta *msta = (struct mt7915_sta *)sta->drv_priv;
+ struct mt76_testmode_data *td = &msta->test;
+ struct ieee80211_vif *vif;
+ struct wireless_dev *wdev;
+
+ if (wi->sofar >= wi->size)
+ return; /* buffer is full */
+
+ vif = container_of((void *)msta->vif, struct ieee80211_vif, drv_priv);
+ wdev = ieee80211_vif_to_wdev(vif);
+
+ wi->sofar += scnprintf(wi->buf + wi->sofar, wi->size - wi->sofar,
+ "vdev (%s) active=%d tpc=%d sgi=%d mcs=%d nss=%d"
+ " pream=%d retries=%d dynbw=%d bw=%d\n",
+ wdev->netdev->name,
+ td->txo_active, td->tx_power[0],
+ td->tx_rate_sgi, td->tx_rate_idx,
+ td->tx_rate_nss, td->tx_rate_mode,
+ td->tx_xmit_count, td->tx_dynbw,
+ td->txbw);
+}
+
+static ssize_t mt7915_read_set_rate_override(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct mt7915_dev *dev = file->private_data;
+ struct ieee80211_hw *hw = dev->mphy.hw;
+ char *buf2;
+ int size = 8000;
+ int rv, sofar;
+ struct mt7915_txo_worker_info wi;
+ const char buf[] =
+ "This allows specify specif tx rate parameters for all DATA"
+ " frames on a vdev\n"
+ "To set a value, you specify the dev-name and key-value pairs:\n"
+ "tpc=10 sgi=1 mcs=x nss=x pream=x retries=x dynbw=0|1 bw=x enable=0|1\n"
+ "pream: 0=cck, 1=ofdm, 2=HT, 3=VHT, 4=HE_SU\n"
+ "cck-mcs: 0=1Mbps, 1=2Mbps, 3=5.5Mbps, 3=11Mbps\n"
+ "ofdm-mcs: 0=6Mbps, 1=9Mbps, 2=12Mbps, 3=18Mbps, 4=24Mbps, 5=36Mbps,"
+ " 6=48Mbps, 7=54Mbps\n"
+ "tpc: adjust power from defaults, in 1/2 db units 0 - 31, 16 is default\n"
+ "bw is 0-3 for 20-160\n"
+ " For example, wlan0:\n"
+ "echo \"wlan0 tpc=255 sgi=1 mcs=0 nss=1 pream=3 retries=1 dynbw=0 bw=0"
+ " active=1\" > ...mt76/set_rate_override\n";
+
+ buf2 = kzalloc(size, GFP_KERNEL);
+ if (!buf2)
+ return -ENOMEM;
+ strcpy(buf2, buf);
+ sofar = strlen(buf2);
+
+ wi.sofar = sofar;
+ wi.buf = buf2;
+ wi.size = size;
+
+ ieee80211_iterate_stations_atomic(hw, mt7915_txo_worker, &wi);
+
+ rv = simple_read_from_buffer(user_buf, count, ppos, buf2, wi.sofar);
+ kfree(buf2);
+ return rv;
+}
+
+/* Set the rates for specific types of traffic.
+ */
+static ssize_t mt7915_write_set_rate_override(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct mt7915_dev *dev = file->private_data;
+ struct mt7915_sta *msta;
+ struct ieee80211_vif *vif;
+ struct mt76_testmode_data *td = NULL;
+ struct wireless_dev *wdev;
+ struct mt76_wcid *wcid;
+ struct mt76_phy *mphy = &dev->mt76.phy;
+ char buf[180];
+ char tmp[20];
+ char *tok;
+ int ret, i, j;
+ unsigned int vdev_id = 0xFFFF;
+ char *bufptr = buf;
+ long rc;
+ char dev_name_match[IFNAMSIZ + 2];
+
+ memset(buf, 0, sizeof(buf));
+
+ simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count);
+
+ /* make sure that buf is null terminated */
+ buf[sizeof(buf) - 1] = 0;
+
+ /* drop the possible '\n' from the end */
+ if (buf[count - 1] == '\n')
+ buf[count - 1] = 0;
+
+ mutex_lock(&mphy->dev->mutex);
+
+ /* Ignore empty lines, 'echo' appends them sometimes at least. */
+ if (buf[0] == 0) {
+ ret = count;
+ goto exit;
+ }
+
+ /* String starts with vdev name, ie 'wlan0' Find the proper vif that
+ * matches the name.
+ */
+ for (i = 0; i < ARRAY_SIZE(dev->mt76.wcid_mask); i++) {
+ u32 mask = dev->mt76.wcid_mask[i];
+ u32 phy_mask = dev->mt76.wcid_phy_mask[i];
+
+ if (!mask)
+ continue;
+
+ for (j = i * 32; mask; j++, mask >>= 1, phy_mask >>= 1) {
+ if (!(mask & 1))
+ continue;
+
+ wcid = rcu_dereference(dev->mt76.wcid[j]);
+ if (!wcid)
+ continue;
+
+ msta = container_of(wcid, struct mt7915_sta, wcid);
+
+ vif = container_of((void *)msta->vif, struct ieee80211_vif, drv_priv);
+
+ wdev = ieee80211_vif_to_wdev(vif);
+
+ if (!wdev)
+ continue;
+
+ snprintf(dev_name_match, sizeof(dev_name_match) - 1, "%s ",
+ wdev->netdev->name);
+
+ if (strncmp(dev_name_match, buf, strlen(dev_name_match)) == 0) {
+ vdev_id = j;
+ td = &msta->test;
+ bufptr = buf + strlen(dev_name_match) - 1;
+ break;
+ }
+ }
+ }
+
+ if (vdev_id == 0xFFFF) {
+ if (strstr(buf, "active=0")) {
+ /* Ignore, we are disabling it anyway */
+ ret = count;
+ goto exit;
+ } else {
+ dev_info(dev->mt76.dev,
+ "mt7915: set-rate-override, unknown netdev name: %s\n", buf);
+ }
+ ret = -EINVAL;
+ goto exit;
+ }
+
+#define MT7915_PARSE_LTOK(a, b) \
+ do { \
+ tok = strstr(bufptr, " " #a "="); \
+ if (tok) { \
+ char *tspace; \
+ tok += 1; /* move past initial space */ \
+ strncpy(tmp, tok + strlen(#a "="), sizeof(tmp) - 1); \
+ tmp[sizeof(tmp) - 1] = 0; \
+ tspace = strstr(tmp, " "); \
+ if (tspace) \
+ *tspace = 0; \
+ if (kstrtol(tmp, 0, &rc) != 0) \
+ dev_info(dev->mt76.dev, \
+ "mt7915: set-rate-override: " #a \
+ "= could not be parsed, tmp: %s\n", \
+ tmp); \
+ else \
+ td->b = rc; \
+ } \
+ } while (0)
+
+ /* TODO: Allow configuring LTF? */
+ td->tx_ltf = 1; /* 0: HTLTF 3.2us, 1: HELTF, 6.4us, 2 HELTF 12,8us */
+
+ MT7915_PARSE_LTOK(tpc, tx_power[0]);
+ MT7915_PARSE_LTOK(sgi, tx_rate_sgi);
+ MT7915_PARSE_LTOK(mcs, tx_rate_idx);
+ MT7915_PARSE_LTOK(nss, tx_rate_nss);
+ MT7915_PARSE_LTOK(pream, tx_rate_mode);
+ MT7915_PARSE_LTOK(retries, tx_xmit_count);
+ MT7915_PARSE_LTOK(dynbw, tx_dynbw);
+ MT7915_PARSE_LTOK(bw, txbw);
+ MT7915_PARSE_LTOK(active, txo_active);
+
+ dev_info(dev->mt76.dev,
+ "mt7915: set-rate-overrides, vdev %i(%s) active=%d tpc=%d sgi=%d mcs=%d"
+ " nss=%d pream=%d retries=%d dynbw=%d bw=%d\n",
+ vdev_id, dev_name_match,
+ td->txo_active, td->tx_power[0], td->tx_rate_sgi, td->tx_rate_idx,
+ td->tx_rate_nss, td->tx_rate_mode, td->tx_xmit_count, td->tx_dynbw,
+ td->txbw);
+
+ ret = count;
+
+exit:
+ mutex_unlock(&mphy->dev->mutex);
+ return ret;
+}
+
+static const struct file_operations fops_set_rate_override = {
+ .read = mt7915_read_set_rate_override,
+ .write = mt7915_write_set_rate_override,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
static void
mt7915_ampdu_stat_read_phy(struct mt7915_phy *phy,
struct seq_file *file)
@@ -1245,6 +1468,8 @@ int mt7915_init_debugfs(struct mt7915_phy *phy)
debugfs_create_devm_seqfile(dev->mt76.dev, "rdd_monitor", dir,
mt7915_rdd_monitor);
}
+ debugfs_create_file("set_rate_override", 0600, dir,
+ dev, &fops_set_rate_override);
if (!ext_phy)
dev->debugfs_dir = dir;
@@ -173,6 +173,15 @@ static void mt7915_mac_sta_poll(struct mt7915_dev *dev)
rx_cur);
}
+ /* If we are in tx-override mode, then wtbl doesn't provide useful report
+ * for the SGI/LGI stuff, so just get it from the override struct.
+ */
+ if (msta->test.txo_active) {
+ msta->wcid.rate_he_gi = msta->test.tx_rate_sgi;
+ msta->wcid.rate_short_gi = msta->test.tx_rate_sgi;
+ continue;
+ }
+
/*
* We don't support reading GI info from txs packets.
* For accurate tx status reporting and AQL improvement,
@@ -610,21 +619,32 @@ mt7915_mac_fill_rx_vector(struct mt7915_dev *dev, struct sk_buff *skb)
}
static void
-mt7915_mac_write_txwi_tm(struct mt7915_phy *phy, __le32 *txwi,
+mt7915_mac_write_txwi_tm(struct mt7915_phy *phy, struct mt76_wcid *wcid, __le32 *txwi,
struct sk_buff *skb)
{
-#ifdef CONFIG_NL80211_TESTMODE
- struct mt76_testmode_data *td = &phy->mt76->test;
+ struct mt76_testmode_data *td;
const struct ieee80211_rate *r;
- u8 bw, mode, nss = td->tx_rate_nss;
- u8 rate_idx = td->tx_rate_idx;
+ struct mt7915_sta *msta;
+ u8 bw, mode, nss;
+ u8 rate_idx;
u16 rateval = 0;
u32 val;
bool cck = false;
int band;
+ int xmit_count = 1;
- if (skb != phy->mt76->test.tx_skb)
- return;
+ msta = container_of(wcid, struct mt7915_sta, wcid);
+
+ if (msta->test.txo_active) {
+ td = &msta->test;
+ } else {
+ if (skb != phy->mt76->test.tx_skb)
+ return;
+ td = &phy->mt76->test;
+ }
+
+ nss = td->tx_rate_nss;
+ rate_idx = td->tx_rate_idx;
switch (td->tx_rate_mode) {
case MT76_TM_TX_MODE_HT:
@@ -665,20 +685,24 @@ mt7915_mac_write_txwi_tm(struct mt7915_phy *phy, __le32 *txwi,
break;
}
- switch (phy->mt76->chandef.width) {
- case NL80211_CHAN_WIDTH_40:
- bw = 1;
- break;
- case NL80211_CHAN_WIDTH_80:
- bw = 2;
- break;
- case NL80211_CHAN_WIDTH_80P80:
- case NL80211_CHAN_WIDTH_160:
- bw = 3;
- break;
- default:
- bw = 0;
- break;
+ if (msta->test.txo_active) {
+ bw = td->txbw;
+ } else {
+ switch (phy->mt76->chandef.width) {
+ case NL80211_CHAN_WIDTH_40:
+ bw = 1;
+ break;
+ case NL80211_CHAN_WIDTH_80:
+ bw = 2;
+ break;
+ case NL80211_CHAN_WIDTH_80P80:
+ case NL80211_CHAN_WIDTH_160:
+ bw = 3;
+ break;
+ default:
+ bw = 0;
+ break;
+ }
}
if (td->tx_rate_stbc && nss == 1) {
@@ -692,10 +716,24 @@ mt7915_mac_write_txwi_tm(struct mt7915_phy *phy, __le32 *txwi,
txwi[2] |= cpu_to_le32(MT_TXD2_FIX_RATE);
- le32p_replace_bits(&txwi[3], 1, MT_TXD3_REM_TX_COUNT);
+ if (msta->test.txo_active) {
+ s8 txp = td->tx_power[0] - 16;
+
+ /* Support per-skb txpower, p.15 of tx doc, DW2 29:24. */
+ le32p_replace_bits(&txwi[2], txp, MT_TXD2_POWER_OFFSET);
+
+ xmit_count = td->tx_xmit_count;
+ if (xmit_count == 0) {
+ xmit_count = 1;
+ txwi[3] |= cpu_to_le32(MT_TXD3_NO_ACK);
+ }
+ }
+
+ le32p_replace_bits(&txwi[3], xmit_count, MT_TXD3_REM_TX_COUNT);
if (td->tx_rate_mode < MT76_TM_TX_MODE_HT)
txwi[3] |= cpu_to_le32(MT_TXD3_BA_DISABLE);
+ /* TODO: Take tx_dynbw into account in txo mode. */
val = MT_TXD6_FIXED_BW |
FIELD_PREP(MT_TXD6_BW, bw) |
FIELD_PREP(MT_TXD6_TX_RATE, rateval) |
@@ -719,9 +757,29 @@ mt7915_mac_write_txwi_tm(struct mt7915_phy *phy, __le32 *txwi,
txwi[3] &= ~cpu_to_le32(MT_TXD3_SN_VALID);
txwi[6] |= cpu_to_le32(val);
- txwi[7] |= cpu_to_le32(FIELD_PREP(MT_TXD7_SPE_IDX,
- phy->test.spe_idx));
-#endif
+
+ if (msta->test.txo_active) {
+ /* see mt7915_tm_set_tx_frames */
+ static const u8 spe_idx_map[] = {0, 0, 1, 0, 3, 2, 4, 0,
+ 9, 8, 6, 10, 16, 12, 18, 0};
+ u32 spe_idx;
+
+ if (td->tx_spe_idx) {
+ spe_idx = td->tx_spe_idx;
+ } else {
+ u8 tx_ant = td->tx_antenna_mask;
+
+ if (!tx_ant) {
+ /* use antenna mask that matches our nss */
+ tx_ant = GENMASK(nss - 1, 0);
+ }
+ spe_idx = spe_idx_map[tx_ant];
+ }
+ txwi[7] |= cpu_to_le32(FIELD_PREP(MT_TXD7_SPE_IDX, spe_idx));
+ } else {
+ txwi[7] |= cpu_to_le32(FIELD_PREP(MT_TXD7_SPE_IDX,
+ phy->test.spe_idx));
+ }
}
void mt7915_mac_write_txwi(struct mt76_dev *dev, __le32 *txwi,
@@ -738,8 +796,30 @@ void mt7915_mac_write_txwi(struct mt76_dev *dev, __le32 *txwi,
mt76_connac2_mac_write_txwi(dev, txwi, skb, wcid, key, pid, qid, changed);
- if (mt76_testmode_enabled(mphy))
- mt7915_mac_write_txwi_tm(mphy->priv, txwi, skb);
+#ifdef CONFIG_NL80211_TESTMODE
+ {
+ struct mt7915_sta *msta;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ __le16 fc;
+ bool is_8023 = info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP;
+
+ if (!is_8023)
+ fc = hdr->frame_control;
+
+ msta = container_of(wcid, struct mt7915_sta, wcid);
+ if (mt76_testmode_enabled(mphy) ||
+ (msta->test.txo_active &&
+ /* Only do txo overrides for (larger) data frames, this
+ * generally allows connection mgt frames to pass but still
+ * lets us force the data packets we care about.
+ */
+ skb->len >= 400 &&
+ (is_8023 ||
+ ((ieee80211_is_data_qos(fc) || ieee80211_is_data(fc)) &&
+ (!(ieee80211_is_qos_nullfunc(fc) || ieee80211_is_nullfunc(fc)))))))
+ mt7915_mac_write_txwi_tm(mphy->priv, wcid, txwi, skb);
+ }
+#endif
}
int mt7915_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
@@ -1029,7 +1109,7 @@ static void mt7915_mac_add_txs(struct mt7915_dev *dev, void *data)
msta = container_of(wcid, struct mt7915_sta, wcid);
if (pid == MT_PACKET_ID_WED)
- mt76_connac2_mac_fill_txs(&dev->mt76, wcid, txs_data);
+ mt76_connac2_mac_fill_txs(&dev->mt76, wcid, txs_data, NULL);
else
mt76_connac2_mac_add_txs_skb(&dev->mt76, wcid, pid, txs_data);
@@ -146,6 +146,8 @@ struct mt7915_sta {
unsigned long jiffies;
struct mt76_connac_sta_key_conf bip;
+ struct mt76_testmode_data test;
+
struct {
u8 flowid_mask;
struct mt7915_twt_flow flow[MT7915_MAX_STA_TWT_AGRT];