diff mbox series

[V7,3/3] leds: Add support for UP board CPLD onboard LEDS

Message ID 20231031015119.29756-4-larry.lai@yunjingtech.com
State Superseded
Headers show
Series Add support control UP board CPLD/FPGA pin control | expand

Commit Message

larry.lai Oct. 31, 2023, 1:51 a.m. UTC
The UP boards come with a few FPGA-controlled onboard LEDs:
* UP Board: yellow, green, red
* UP Squared: blue, yellow, green, red

This patch depends on patch "mfd: Add support for UP board CPLD/FPGA".

Signed-off-by: Gary Wang <garywang@aaeon.com.tw>
Signed-off-by: larry.lai <larry.lai@yunjingtech.com>
---
PATCH V6 --> PATCH V7: cleaned up coding style and addressed review
comments.
PATCH V4 -> PATCH V6 : There is no change.
RFC 2023/04/25 -> PATCH V4
(1) Fixed kernel test robot compiler warning.
(2) Remove mistakes with wrong Reviewed-by tags.
RFC 2022/11/23 --> RFC 2023/04/25: Refer 2022/12/08 Lee Jones review,
cleaned up coding style.
PATCH V3 -> RFC 2022/11/23: Update the changes Copyright.
PATCH V1 -> V3: There is no change.
PATCH --> PATCH V1: Refer 2022/10/03 Andy Shevchenko review, cleaned up
coding style.
---
 drivers/leds/Kconfig        |  10 +++
 drivers/leds/Makefile       |   1 +
 drivers/leds/leds-upboard.c | 154 ++++++++++++++++++++++++++++++++++++
 3 files changed, 165 insertions(+)
 create mode 100644 drivers/leds/leds-upboard.c

Comments

Krzysztof Kozlowski Nov. 1, 2023, 10:44 a.m. UTC | #1
On 31/10/2023 02:51, larry.lai wrote:
> The UP boards come with a few FPGA-controlled onboard LEDs:
> * UP Board: yellow, green, red
> * UP Squared: blue, yellow, green, red
> 
> This patch depends on patch "mfd: Add support for UP board CPLD/FPGA".

Your commit msg should not describe dependencies within patches. Cover
letter or --- changelog should. This is totally irrelevant for the git
history.

> 
> Signed-off-by: Gary Wang <garywang@aaeon.com.tw>
> Signed-off-by: larry.lai <larry.lai@yunjingtech.com>

...

> +
> +static int __init upboard_led_probe(struct platform_device *pdev)

Same problems.

> +{
> +	struct upboard_fpga * const cpld = dev_get_drvdata(pdev->dev.parent);
> +	struct reg_field fldconf = {
> +		.reg = UPFPGA_REG_FUNC_EN0,
> +	};
> +	struct upboard_led_data * const pdata = pdev->dev.platform_data;
> +	struct upboard_led *led;
> +
> +	/* check & register GPIO LEDs */
> +	if (strstr(pdata->colour, "gpio"))
> +		return upboard_led_gpio_register(cpld);
> +
> +	led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
> +	if (!led)
> +		return -ENOMEM;
> +
> +	fldconf.lsb = pdata->bit;
> +	fldconf.msb = pdata->bit;
> +	led->field = devm_regmap_field_alloc(&pdev->dev, cpld->regmap, fldconf);
> +	if (IS_ERR(led->field))
> +		return PTR_ERR(led->field);
> +
> +	led->cdev.brightness_get = upboard_led_brightness_get;
> +	led->cdev.brightness_set = upboard_led_brightness_set;
> +	led->cdev.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "upboard:%s:", pdata->colour);
> +	if (!led->cdev.name)
> +		return -ENOMEM;
> +
> +	return devm_led_classdev_register(&pdev->dev, &led->cdev);
> +};
> +
> +static struct platform_driver upboard_led_driver = {
> +	.driver = {
> +		.name = "upboard-led",
> +	},
> +};
> +module_platform_driver_probe(upboard_led_driver, upboard_led_probe);
> +
> +MODULE_AUTHOR("Gary Wang <garywang@aaeon.com.tw>");
> +MODULE_DESCRIPTION("UP Board LED driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:upboard-led");

Same problem.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 499d0f215a8b..d9d533cb38ca 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -872,6 +872,16 @@  source "drivers/leds/flash/Kconfig"
 comment "RGB LED drivers"
 source "drivers/leds/rgb/Kconfig"
 
+config LEDS_UPBOARD
+	tristate "LED support for the UP board"
+	depends on LEDS_CLASS
+	depends on MFD_INTEL_UPBOARD_FPGA
+	help
+	  This option enables support for the UP board LEDs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called leds-upboard.
+
 comment "LED Triggers"
 source "drivers/leds/trigger/Kconfig"
 
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 4fd2f92cd198..e72956645646 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -83,6 +83,7 @@  obj-$(CONFIG_LEDS_TI_LMU_COMMON)	+= leds-ti-lmu-common.o
 obj-$(CONFIG_LEDS_TLC591XX)		+= leds-tlc591xx.o
 obj-$(CONFIG_LEDS_TPS6105X)		+= leds-tps6105x.o
 obj-$(CONFIG_LEDS_TURRIS_OMNIA)		+= leds-turris-omnia.o
+obj-$(CONFIG_LEDS_UPBOARD)		+= leds-upboard.o
 obj-$(CONFIG_LEDS_WM831X_STATUS)	+= leds-wm831x-status.o
 obj-$(CONFIG_LEDS_WM8350)		+= leds-wm8350.o
 obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
diff --git a/drivers/leds/leds-upboard.c b/drivers/leds/leds-upboard.c
new file mode 100644
index 000000000000..8198f41563ea
--- /dev/null
+++ b/drivers/leds/leds-upboard.c
@@ -0,0 +1,154 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * UP Board CPLD/FPGA based LED driver
+ *
+ * Copyright (c) AAEON. All rights reserved.
+ *
+ * Author: Gary Wang <garywang@aaeon.com.tw>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/upboard-fpga.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+struct upboard_led {
+	struct regmap_field *field;
+	struct led_classdev cdev;
+	unsigned char bit;
+};
+
+static enum led_brightness upboard_led_brightness_get(struct led_classdev *cdev)
+{
+	struct upboard_led *led = container_of(cdev, struct upboard_led, cdev);
+	int brightness = 0;
+
+	regmap_field_read(led->field, &brightness);
+
+	return brightness;
+};
+
+static void upboard_led_brightness_set(struct led_classdev *cdev, enum led_brightness brightness)
+{
+	struct upboard_led *led = container_of(cdev, struct upboard_led, cdev);
+
+	regmap_field_write(led->field, brightness != LED_OFF);
+};
+
+static struct gpio_led_platform_data upboard_gpio_led_pd;
+static const struct mfd_cell upboard_gpio_led_cells[] = {
+	MFD_CELL_BASIC("leds-gpio", NULL,
+		       &upboard_gpio_led_pd,
+		       sizeof(upboard_gpio_led_pd), 0)
+};
+
+int upboard_led_gpio_register(struct upboard_fpga *fpga)
+{
+	struct gpio_led blue_led, yellow_led, green_led, red_led;
+	struct gpio_desc *desc;
+	static struct gpio_led leds[4];
+	int num_leds = 0;
+	int ret;
+
+	desc = devm_gpiod_get(fpga->dev, "blue", GPIOD_OUT_LOW);
+	if (!IS_ERR(desc)) {
+		blue_led.name = "upboard:blue:";
+		blue_led.gpio = desc_to_gpio(desc);
+		blue_led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
+		leds[num_leds++] = blue_led;
+		devm_gpiod_put(fpga->dev, desc);
+	}
+
+	desc = devm_gpiod_get(fpga->dev, "yellow", GPIOD_OUT_LOW);
+	if (!IS_ERR(desc)) {
+		yellow_led.name = "upboard:yellow:";
+		yellow_led.gpio = desc_to_gpio(desc);
+		yellow_led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
+		leds[num_leds++] = yellow_led;
+		devm_gpiod_put(fpga->dev, desc);
+	}
+
+	desc = devm_gpiod_get(fpga->dev, "green", GPIOD_OUT_LOW);
+	if (!IS_ERR(desc)) {
+		green_led.name = "upboard:green:";
+		green_led.gpio = desc_to_gpio(desc);
+		green_led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
+		leds[num_leds++] = green_led;
+		devm_gpiod_put(fpga->dev, desc);
+	}
+
+	desc = devm_gpiod_get(fpga->dev, "red", GPIOD_OUT_LOW);
+	if (!IS_ERR(desc)) {
+		red_led.name = "upboard:red:";
+		red_led.gpio = desc_to_gpio(desc);
+		red_led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
+		leds[num_leds++] = red_led;
+		devm_gpiod_put(fpga->dev, desc);
+	}
+
+	/* No optional LEDs defined */
+	if (num_leds == 0)
+		return -ENODEV;
+
+	upboard_gpio_led_pd.num_leds = num_leds;
+	upboard_gpio_led_pd.leds = leds;
+
+	ret = devm_mfd_add_devices(fpga->dev, PLATFORM_DEVID_AUTO,
+				   upboard_gpio_led_cells,
+				   ARRAY_SIZE(upboard_gpio_led_cells),
+				   NULL, 0, NULL);
+	if (ret) {
+		dev_err(fpga->dev, "Failed to add GPIO LEDs, %d", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int __init upboard_led_probe(struct platform_device *pdev)
+{
+	struct upboard_fpga * const cpld = dev_get_drvdata(pdev->dev.parent);
+	struct reg_field fldconf = {
+		.reg = UPFPGA_REG_FUNC_EN0,
+	};
+	struct upboard_led_data * const pdata = pdev->dev.platform_data;
+	struct upboard_led *led;
+
+	/* check & register GPIO LEDs */
+	if (strstr(pdata->colour, "gpio"))
+		return upboard_led_gpio_register(cpld);
+
+	led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+
+	fldconf.lsb = pdata->bit;
+	fldconf.msb = pdata->bit;
+	led->field = devm_regmap_field_alloc(&pdev->dev, cpld->regmap, fldconf);
+	if (IS_ERR(led->field))
+		return PTR_ERR(led->field);
+
+	led->cdev.brightness_get = upboard_led_brightness_get;
+	led->cdev.brightness_set = upboard_led_brightness_set;
+	led->cdev.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "upboard:%s:", pdata->colour);
+	if (!led->cdev.name)
+		return -ENOMEM;
+
+	return devm_led_classdev_register(&pdev->dev, &led->cdev);
+};
+
+static struct platform_driver upboard_led_driver = {
+	.driver = {
+		.name = "upboard-led",
+	},
+};
+module_platform_driver_probe(upboard_led_driver, upboard_led_probe);
+
+MODULE_AUTHOR("Gary Wang <garywang@aaeon.com.tw>");
+MODULE_DESCRIPTION("UP Board LED driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:upboard-led");