@@ -38,7 +38,7 @@ Sysfs entries
fan[1-12]_input RO fan tachometer speed in RPM
fan[1-12]_fault RO fan experienced fault
fan[1-6]_target RW desired fan speed in RPM
-fan[1-6]_enable RW enable or disable the tachometer input
+fan[1-12]_enable RW enable or disable the tachometer input
pwm[1-6]_enable RW regulator mode, 0=disabled (duty cycle=0%), 1=manual mode, 2=rpm mode
pwm[1-6] RW read: current pwm duty cycle,
write: target pwm duty cycle (0-255)
@@ -203,7 +203,8 @@ static int max31790_read_fan(struct device *dev, u32 attr, int channel,
mutex_unlock(&data->update_lock);
return 0;
case hwmon_fan_enable:
- *val = !!(data->fan_config[channel] & MAX31790_FAN_CFG_TACH_INPUT_EN);
+ *val = !!(data->fan_config[channel % NR_CHANNEL] &
+ MAX31790_FAN_CFG_TACH_INPUT_EN);
return 0;
default:
return -EOPNOTSUPP;
@@ -242,12 +243,12 @@ static int max31790_write_fan(struct device *dev, u32 attr, int channel,
data->target_count[channel] = target_count << 5;
- err = i2c_smbus_write_word_swapped(client,
- MAX31790_REG_TARGET_COUNT(channel),
- data->target_count[channel]);
+ err = i2c_smbus_write_word_swapped(
+ client, MAX31790_REG_TARGET_COUNT(channel),
+ data->target_count[channel]);
break;
case hwmon_fan_enable:
- fan_config = data->fan_config[channel];
+ fan_config = data->fan_config[channel % NR_CHANNEL];
if (val == 0) {
fan_config &= ~MAX31790_FAN_CFG_TACH_INPUT_EN;
} else if (val == 1) {
@@ -256,11 +257,14 @@ static int max31790_write_fan(struct device *dev, u32 attr, int channel,
err = -EINVAL;
break;
}
- if (fan_config != data->fan_config[channel]) {
- err = i2c_smbus_write_byte_data(client, MAX31790_REG_FAN_CONFIG(channel),
- fan_config);
+ if (fan_config != data->fan_config[channel % NR_CHANNEL]) {
+ err = i2c_smbus_write_byte_data(
+ client,
+ MAX31790_REG_FAN_CONFIG(channel % NR_CHANNEL),
+ fan_config);
if (!err)
- data->fan_config[channel] = fan_config;
+ data->fan_config[channel % NR_CHANNEL] =
+ fan_config;
}
break;
default:
@@ -291,7 +295,8 @@ static umode_t max31790_fan_is_visible(const void *_data, u32 attr, int channel)
return 0644;
return 0;
case hwmon_fan_enable:
- if (channel < NR_CHANNEL)
+ if (channel < NR_CHANNEL ||
+ (fan_config & MAX31790_FAN_CFG_TACH_INPUT))
return 0644;
return 0;
default:
@@ -445,22 +450,22 @@ static umode_t max31790_is_visible(const void *data,
}
}
-static const struct hwmon_channel_info * const max31790_info[] = {
- HWMON_CHANNEL_INFO(fan,
- HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT | HWMON_F_ENABLE,
- HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT | HWMON_F_ENABLE,
- HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT | HWMON_F_ENABLE,
- HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT | HWMON_F_ENABLE,
- HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT | HWMON_F_ENABLE,
- HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT | HWMON_F_ENABLE,
- HWMON_F_INPUT | HWMON_F_FAULT,
- HWMON_F_INPUT | HWMON_F_FAULT,
- HWMON_F_INPUT | HWMON_F_FAULT,
- HWMON_F_INPUT | HWMON_F_FAULT,
- HWMON_F_INPUT | HWMON_F_FAULT,
- HWMON_F_INPUT | HWMON_F_FAULT),
- HWMON_CHANNEL_INFO(pwm,
- HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
+static const struct hwmon_channel_info *const max31790_info[] = {
+ HWMON_CHANNEL_INFO(
+ fan,
+ HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT | HWMON_F_ENABLE,
+ HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT | HWMON_F_ENABLE,
+ HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT | HWMON_F_ENABLE,
+ HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT | HWMON_F_ENABLE,
+ HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT | HWMON_F_ENABLE,
+ HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT | HWMON_F_ENABLE,
+ HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_ENABLE,
+ HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_ENABLE,
+ HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_ENABLE,
+ HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_ENABLE,
+ HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_ENABLE,
+ HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_ENABLE),
+ HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
The fanN_enable will be set in dbus-sensors service according to the index of TACH that filled in the configuration of entity-manager. Add fanN_enable for all fans to prevent dbus-sensors service couldn't find the corresponding fanN_enable for fanN_input. Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> --- Changelog: v4 - Add fanN_enable for all fans. --- Documentation/hwmon/max31790.rst | 2 +- drivers/hwmon/max31790.c | 57 +++++++++++++++++--------------- 2 files changed, 32 insertions(+), 27 deletions(-)