@@ -592,6 +592,7 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
#ifdef CONFIG_SERIAL_8250_CONSOLE
+#ifdef CONFIG_SERIAL_8250_LEGACY_CONSOLE
static void univ8250_console_write(struct console *co, const char *s,
unsigned int count)
{
@@ -599,7 +600,7 @@ static void univ8250_console_write(struct console *co, const char *s,
serial8250_console_write(up, s, count);
}
-
+#else
static bool univ8250_console_write_atomic(struct console *co,
struct nbcon_write_context *wctxt)
{
@@ -608,10 +609,19 @@ static bool univ8250_console_write_atomic(struct console *co,
return serial8250_console_write_atomic(up, wctxt);
}
+static bool univ8250_console_write_thread(struct console *co,
+ struct nbcon_write_context *wctxt)
+{
+ struct uart_8250_port *up = &serial8250_ports[co->index];
+
+ return serial8250_console_write_thread(up, wctxt);
+}
+
static struct uart_port *univ8250_console_uart_port(struct console *con)
{
return &serial8250_ports[con->index].port;
}
+#endif /* CONFIG_SERIAL_8250_LEGACY_CONSOLE */
static int univ8250_console_setup(struct console *co, char *options)
{
@@ -711,15 +721,19 @@ static int univ8250_console_match(struct console *co, char *name, int idx,
static struct console univ8250_console = {
.name = "ttyS",
+#ifdef CONFIG_SERIAL_8250_LEGACY_CONSOLE
.write = univ8250_console_write,
+ .flags = CON_PRINTBUFFER | CON_ANYTIME,
+#else
.write_atomic = univ8250_console_write_atomic,
- .write_thread = univ8250_console_write_atomic,
+ .write_thread = univ8250_console_write_thread,
+ .flags = CON_PRINTBUFFER | CON_ANYTIME | CON_NBCON,
.uart_port = univ8250_console_uart_port,
+#endif
.device = uart_console_device,
.setup = univ8250_console_setup,
.exit = univ8250_console_exit,
.match = univ8250_console_match,
- .flags = CON_PRINTBUFFER | CON_ANYTIME | CON_NBCON,
.index = -1,
.data = &serial8250_reg,
};
@@ -557,8 +557,10 @@ static int serial8250_em485_init(struct uart_8250_port *p)
if (!p->em485)
return -ENOMEM;
+#ifndef CONFIG_SERIAL_8250_LEGACY_CONSOLE
if (uart_console(&p->port))
dev_warn(p->port.dev, "no atomic printing for rs485 consoles\n");
+#endif
hrtimer_init(&p->em485->stop_tx_timer, CLOCK_MONOTONIC,
HRTIMER_MODE_REL);
@@ -712,7 +714,10 @@ static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
serial8250_rpm_put(p);
}
-/* Only to be used by write_atomic(), which does not require port lock. */
+/*
+ * Only to be used by write_atomic() and the legacy write(), which do not
+ * require port lock.
+ */
static void __serial8250_clear_IER(struct uart_8250_port *up)
{
if (up->capabilities & UART_CAP_UUE)
@@ -3340,6 +3345,11 @@ static void serial8250_console_putchar(struct uart_port *port, unsigned char ch)
wait_for_xmitr(up, UART_LSR_THRE);
serial_port_out(port, UART_TX, ch);
+
+ if (ch == '\n')
+ up->console_newline_needed = false;
+ else
+ up->console_newline_needed = true;
}
/*
@@ -3368,6 +3378,7 @@ static void serial8250_console_restore(struct uart_8250_port *up)
serial8250_out_MCR(up, up->mcr | UART_MCR_DTR | UART_MCR_RTS);
}
+#ifdef CONFIG_SERIAL_8250_LEGACY_CONSOLE
/*
* Print a string to the serial port using the device FIFO
*
@@ -3413,16 +3424,20 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s,
struct uart_port *port = &up->port;
unsigned long flags;
unsigned int ier, use_fifo;
+ int locked = 1;
touch_nmi_watchdog();
- uart_port_lock_irqsave(port, &flags);
+ if (oops_in_progress)
+ locked = uart_port_trylock_irqsave(port, &flags);
+ else
+ uart_port_lock_irqsave(port, &flags);
/*
* First save the IER then disable the interrupts
*/
ier = serial_port_in(port, UART_IER);
- serial8250_clear_IER(up);
+ __serial8250_clear_IER(up);
/* check scratch reg to see if port powered off during system sleep */
if (up->canary && (up->canary != serial_port_in(port, UART_SCR))) {
@@ -3485,7 +3500,102 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s,
if (up->msr_saved_flags)
serial8250_modem_status(up);
- uart_port_unlock_irqrestore(port, flags);
+ if (locked)
+ uart_port_unlock_irqrestore(port, flags);
+}
+#else
+bool serial8250_console_write_thread(struct uart_8250_port *up,
+ struct nbcon_write_context *wctxt)
+{
+ struct uart_8250_em485 *em485 = up->em485;
+ struct uart_port *port = &up->port;
+ bool done = false;
+ unsigned int ier;
+
+ touch_nmi_watchdog();
+
+ if (!nbcon_enter_unsafe(wctxt))
+ return false;
+
+ /*
+ * First save the IER then disable the interrupts
+ */
+ ier = serial_port_in(port, UART_IER);
+ serial8250_clear_IER(up);
+
+ /* check scratch reg to see if port powered off during system sleep */
+ if (up->canary && (up->canary != serial_port_in(port, UART_SCR))) {
+ serial8250_console_restore(up);
+ up->canary = 0;
+ }
+
+ if (em485) {
+ if (em485->tx_stopped)
+ up->rs485_start_tx(up);
+ mdelay(port->rs485.delay_rts_before_send);
+ }
+
+ if (nbcon_exit_unsafe(wctxt)) {
+ int len = READ_ONCE(wctxt->len);
+ int i;
+
+ /*
+ * Write out the message. Toggle unsafe for each byte in order
+ * to give another (higher priority) context the opportunity
+ * for a friendly takeover. If such a takeover occurs, this
+ * context must reacquire ownership in order to perform final
+ * actions (such as re-enabling the interrupts).
+ *
+ * IMPORTANT: wctxt->outbuf and wctxt->len are no longer valid
+ * after a reacquire so writing the message must be
+ * aborted.
+ */
+ for (i = 0; i < len; i++) {
+ if (!nbcon_enter_unsafe(wctxt)) {
+ nbcon_reacquire(wctxt);
+ break;
+ }
+
+ uart_console_write(port, wctxt->outbuf + i, 1, serial8250_console_putchar);
+
+ if (!nbcon_exit_unsafe(wctxt)) {
+ nbcon_reacquire(wctxt);
+ break;
+ }
+ }
+ done = (i == len);
+ } else {
+ nbcon_reacquire(wctxt);
+ }
+
+ while (!nbcon_enter_unsafe(wctxt))
+ nbcon_reacquire(wctxt);
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
+
+ if (em485) {
+ mdelay(port->rs485.delay_rts_after_send);
+ if (em485->tx_stopped)
+ up->rs485_stop_tx(up);
+ }
+
+ serial_port_out(port, UART_IER, ier);
+
+ /*
+ * The receive handling will happen properly because the
+ * receive ready bit will still be set; it is not cleared
+ * on read. However, modem control will not, we must
+ * call it if we have saved something in the saved flags
+ * while processing with interrupts off.
+ */
+ if (up->msr_saved_flags)
+ serial8250_modem_status(up);
+
+ return (nbcon_exit_unsafe(wctxt) && done);
}
bool serial8250_console_write_atomic(struct uart_8250_port *up,
@@ -3515,6 +3625,8 @@ bool serial8250_console_write_atomic(struct uart_8250_port *up,
up->canary = 0;
}
+ if (up->console_newline_needed)
+ uart_console_write(port, "\n", 1, serial8250_console_putchar);
uart_console_write(port, wctxt->outbuf, wctxt->len, serial8250_console_putchar);
/*
@@ -3527,6 +3639,7 @@ bool serial8250_console_write_atomic(struct uart_8250_port *up,
return nbcon_exit_unsafe(wctxt);
}
+#endif /* CONFIG_SERIAL_8250_LEGACY_CONSOLE */
static unsigned int probe_baud(struct uart_port *port)
{
@@ -3545,6 +3658,7 @@ static unsigned int probe_baud(struct uart_port *port)
int serial8250_console_setup(struct uart_port *port, char *options, bool probe)
{
+ struct uart_8250_port *up = up_to_u8250p(port);
int baud = 9600;
int bits = 8;
int parity = 'n';
@@ -3554,6 +3668,8 @@ int serial8250_console_setup(struct uart_port *port, char *options, bool probe)
if (!port->iobase && !port->membase)
return -ENODEV;
+ up->console_newline_needed = false;
+
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else if (probe)
@@ -467,17 +467,19 @@ static inline bool console_is_registered(const struct console *con)
hlist_for_each_entry(con, &console_list, node)
#ifdef CONFIG_PRINTK
-extern enum nbcon_prio nbcon_atomic_enter(enum nbcon_prio prio);
-extern void nbcon_atomic_exit(enum nbcon_prio prio, enum nbcon_prio prev_prio);
+extern void nbcon_cpu_emergency_enter(void);
+extern void nbcon_cpu_emergency_exit(void);
extern bool nbcon_can_proceed(struct nbcon_write_context *wctxt);
extern bool nbcon_enter_unsafe(struct nbcon_write_context *wctxt);
extern bool nbcon_exit_unsafe(struct nbcon_write_context *wctxt);
+extern void nbcon_reacquire(struct nbcon_write_context *wctxt);
#else
-static inline enum nbcon_prio nbcon_atomic_enter(enum nbcon_prio prio) { return NBCON_PRIO_NONE; }
-static inline void nbcon_atomic_exit(enum nbcon_prio prio, enum nbcon_prio prev_prio) { }
+static inline void nbcon_cpu_emergency_enter(void) { }
+static inline void nbcon_cpu_emergency_exit(void) { }
static inline bool nbcon_can_proceed(struct nbcon_write_context *wctxt) { return false; }
static inline bool nbcon_enter_unsafe(struct nbcon_write_context *wctxt) { return false; }
static inline bool nbcon_exit_unsafe(struct nbcon_write_context *wctxt) { return false; }
+static inline void nbcon_reacquire(struct nbcon_write_context *wctxt) { }
#endif
extern int console_set_on_cmdline;
@@ -197,9 +197,9 @@ void show_regs_print_info(const char *log_lvl);
extern asmlinkage void dump_stack_lvl(const char *log_lvl) __cold;
extern asmlinkage void dump_stack(void) __cold;
void printk_trigger_flush(void);
-extern void nbcon_atomic_flush_all(void);
extern void nbcon_handle_port_lock(struct uart_port *up);
extern void nbcon_handle_port_unlock(struct uart_port *up);
+void nbcon_atomic_flush_unsafe(void);
#else
static inline __printf(1, 0)
int vprintk(const char *s, va_list args)
@@ -280,10 +280,6 @@ static inline void printk_trigger_flush(void)
{
}
-static inline void nbcon_atomic_flush_all(void)
-{
-}
-
static inline void nbcon_handle_port_lock(struct uart_port *up)
{
}
@@ -292,6 +288,10 @@ static inline void nbcon_handle_port_unlock(struct uart_port *up)
{
}
+static inline void nbcon_atomic_flush_unsafe(void)
+{
+}
+
#endif
#ifdef CONFIG_SMP
@@ -153,6 +153,8 @@ struct uart_8250_port {
#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
unsigned char msr_saved_flags;
+ bool console_newline_needed;
+
struct uart_8250_dma *dma;
const struct uart_8250_ops *ops;
@@ -206,6 +208,8 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s,
unsigned int count);
bool serial8250_console_write_atomic(struct uart_8250_port *up,
struct nbcon_write_context *wctxt);
+bool serial8250_console_write_thread(struct uart_8250_port *up,
+ struct nbcon_write_context *wctxt);
int serial8250_console_setup(struct uart_port *port, char *options, bool probe);
int serial8250_console_exit(struct uart_port *port);
@@ -3968,12 +3968,10 @@ static void
print_usage_bug(struct task_struct *curr, struct held_lock *this,
enum lock_usage_bit prev_bit, enum lock_usage_bit new_bit)
{
- enum nbcon_prio prev_prio;
-
if (!debug_locks_off() || debug_locks_silent)
return;
- prev_prio = nbcon_atomic_enter(NBCON_PRIO_EMERGENCY);
+ nbcon_cpu_emergency_enter();
pr_warn("\n");
pr_warn("================================\n");
@@ -4004,7 +4002,7 @@ print_usage_bug(struct task_struct *curr, struct held_lock *this,
pr_warn("\nstack backtrace:\n");
dump_stack();
- nbcon_atomic_exit(NBCON_PRIO_EMERGENCY, prev_prio);
+ nbcon_cpu_emergency_exit();
}
/*
@@ -275,7 +275,6 @@ static void panic_other_cpus_shutdown(bool crash_kexec)
*/
void panic(const char *fmt, ...)
{
- enum nbcon_prio prev_prio;
static char buf[1024];
va_list args;
long i, i_next = 0, len;
@@ -323,8 +322,6 @@ void panic(const char *fmt, ...)
if (old_cpu != PANIC_CPU_INVALID && old_cpu != this_cpu)
panic_smp_self_stop();
- prev_prio = nbcon_atomic_enter(NBCON_PRIO_PANIC);
-
console_verbose();
bust_spinlocks(1);
va_start(args, fmt);
@@ -385,8 +382,6 @@ void panic(const char *fmt, ...)
if (_crash_kexec_post_notifiers)
__crash_kexec(NULL);
- nbcon_atomic_flush_all();
-
console_unblank();
/*
@@ -411,7 +406,6 @@ void panic(const char *fmt, ...)
* We can't use the "normal" timers since we just panicked.
*/
pr_emerg("Rebooting in %d seconds..\n", panic_timeout);
- nbcon_atomic_flush_all();
for (i = 0; i < panic_timeout * 1000; i += PANIC_TIMER_STEP) {
touch_nmi_watchdog();
@@ -430,7 +424,6 @@ void panic(const char *fmt, ...)
*/
if (panic_reboot_mode != REBOOT_UNDEFINED)
reboot_mode = panic_reboot_mode;
- nbcon_atomic_flush_all();
emergency_restart();
}
#ifdef __sparc__
@@ -443,7 +436,6 @@ void panic(const char *fmt, ...)
}
#endif
#if defined(CONFIG_S390)
- nbcon_atomic_flush_all();
disabled_wait();
#endif
pr_emerg("---[ end Kernel panic - not syncing: %s ]---\n", buf);
@@ -451,7 +443,7 @@ void panic(const char *fmt, ...)
/* Do not scroll important messages printed above */
suppress_printk = 1;
- nbcon_atomic_exit(NBCON_PRIO_PANIC, prev_prio);
+ nbcon_atomic_flush_unsafe();
local_irq_enable();
for (i = 0; ; i += PANIC_TIMER_STEP) {
@@ -614,10 +606,6 @@ bool oops_may_print(void)
return pause_on_oops_flag == 0;
}
-static int oops_printing_cpu = -1;
-static int oops_nesting;
-static enum nbcon_prio oops_prev_prio;
-
/*
* Called when the architecture enters its oops handler, before it prints
* anything. If this is the first CPU to oops, and it's oopsing the first
@@ -634,38 +622,7 @@ static enum nbcon_prio oops_prev_prio;
*/
void oops_enter(void)
{
- enum nbcon_prio prev_prio;
- int cur_cpu = get_cpu();
- int old_cpu = -1;
-
- /*
- * If this turns out to be the first CPU in oops, this is the
- * beginning of the outermost atomic printing section. Otherwise
- * it is the beginning of an inner atomic printing section.
- */
- prev_prio = nbcon_atomic_enter(NBCON_PRIO_EMERGENCY);
-
- old_cpu = cmpxchg(&oops_printing_cpu, old_cpu, cur_cpu);
- if (old_cpu == -1) {
- /*
- * This is the first CPU in oops so it will be the printer.
- * Save the outermost @prev_prio in order to restore it on the
- * outermost matching oops_exit(), when @oops_nesting == 0.
- */
- oops_prev_prio = prev_prio;
-
- /*
- * Enter an inner atomic printing section that ends at the end
- * of this function. In this case, the nbcon_atomic_enter()
- * above began the outermost atomic printing section.
- */
- prev_prio = nbcon_atomic_enter(NBCON_PRIO_EMERGENCY);
- }
-
- /* Track nesting when this CPU is the printer. */
- if (old_cpu == -1 || old_cpu == cur_cpu)
- oops_nesting++;
-
+ nbcon_cpu_emergency_enter();
tracing_off();
/* can't trust the integrity of the kernel anymore: */
debug_locks_off();
@@ -673,9 +630,6 @@ void oops_enter(void)
if (sysctl_oops_all_cpu_backtrace)
trigger_all_cpu_backtrace();
-
- /* Exit inner atomic printing section. */
- nbcon_atomic_exit(NBCON_PRIO_EMERGENCY, prev_prio);
}
static void print_oops_end_marker(void)
@@ -691,23 +645,7 @@ void oops_exit(void)
{
do_oops_enter_exit();
print_oops_end_marker();
-
- /*
- * Reading @oops_printing_cpu is a data race if this CPU is not the
- * printer. But that is OK because in that situation the condition
- * will correctly evaluate to false regardless which value was read.
- */
- if (oops_printing_cpu == smp_processor_id()) {
- oops_nesting--;
- if (oops_nesting == 0) {
- oops_printing_cpu = -1;
-
- /* Exit outermost atomic printing section. */
- nbcon_atomic_exit(NBCON_PRIO_EMERGENCY, oops_prev_prio);
- }
- }
- put_cpu();
-
+ nbcon_cpu_emergency_exit();
kmsg_dump(KMSG_DUMP_OOPS);
}
@@ -719,9 +657,7 @@ struct warn_args {
void __warn(const char *file, int line, void *caller, unsigned taint,
struct pt_regs *regs, struct warn_args *args)
{
- enum nbcon_prio prev_prio;
-
- prev_prio = nbcon_atomic_enter(NBCON_PRIO_EMERGENCY);
+ nbcon_cpu_emergency_enter();
disable_trace_on_warning();
@@ -754,7 +690,7 @@ void __warn(const char *file, int line, void *caller, unsigned taint,
/* Just a warning, don't kill lockdep. */
add_taint(taint, LOCKDEP_STILL_OK);
- nbcon_atomic_exit(NBCON_PRIO_EMERGENCY, prev_prio);
+ nbcon_cpu_emergency_exit();
}
#ifdef CONFIG_BUG
@@ -54,7 +54,7 @@ extern bool have_boot_console;
* be printed serially along with the legacy consoles because nbcon
* consoles cannot print simultaneously with boot consoles.
*/
-#define serialized_printing (have_legacy_console || have_boot_console)
+#define printing_via_unlock (have_legacy_console || have_boot_console)
__printf(4, 0)
int vprintk_store(int facility, int level,
@@ -88,7 +88,9 @@ void nbcon_seq_force(struct console *con, u64 seq);
bool nbcon_alloc(struct console *con);
void nbcon_init(struct console *con);
void nbcon_free(struct console *con);
-bool nbcon_console_emit_next_record(struct console *con);
+enum nbcon_prio nbcon_get_default_prio(void);
+void nbcon_atomic_flush_all(void);
+bool nbcon_atomic_emit_next_record(struct console *con);
void nbcon_kthread_create(struct console *con);
void nbcon_wake_threads(void);
void nbcon_legacy_kthread_create(void);
@@ -160,7 +162,7 @@ static inline void nbcon_kthread_wake(struct console *con)
static inline void nbcon_kthread_wake(struct console *con) { }
static inline void nbcon_kthread_create(struct console *con) { }
#define printk_threads_enabled (false)
-#define serialized_printing (false)
+#define printing_via_unlock (false)
/*
* In !PRINTK builds we still export console_sem
@@ -176,7 +178,9 @@ static inline void nbcon_seq_force(struct console *con, u64 seq) { }
static inline bool nbcon_alloc(struct console *con) { return false; }
static inline void nbcon_init(struct console *con) { }
static inline void nbcon_free(struct console *con) { }
-static bool nbcon_console_emit_next_record(struct console *con) { return false; }
+enum nbcon_prio nbcon_get_default_prio(void) { return NBCON_PRIO_NONE; }
+static inline void nbcon_atomic_flush_all(void) { }
+static bool nbcon_atomic_emit_next_record(struct console *con) { return false; }
static inline bool console_is_usable(struct console *con, short flags, bool use_atomic) { return false; }
@@ -211,6 +215,7 @@ struct printk_message {
};
bool other_cpu_in_panic(void);
+bool this_cpu_in_panic(void);
bool printk_get_next_message(struct printk_message *pmsg, u64 seq,
bool is_extended, bool may_supress);
@@ -867,10 +867,26 @@ bool nbcon_exit_unsafe(struct nbcon_write_context *wctxt)
}
EXPORT_SYMBOL_GPL(nbcon_exit_unsafe);
+void nbcon_reacquire(struct nbcon_write_context *wctxt)
+{
+ struct nbcon_context *ctxt = &ACCESS_PRIVATE(wctxt, ctxt);
+ struct console *con = ctxt->console;
+ struct nbcon_state cur;
+
+ while (!nbcon_context_try_acquire(ctxt))
+ cpu_relax();
+
+ wctxt->outbuf = NULL;
+ wctxt->len = 0;
+ nbcon_state_read(con, &cur);
+ wctxt->unsafe_takeover = cur.unsafe_takeover;
+}
+EXPORT_SYMBOL_GPL(nbcon_reacquire);
+
/**
* nbcon_emit_next_record - Emit a record in the acquired context
* @wctxt: The write context that will be handed to the write function
- * @in_kthread: True if called from kthread printer context.
+ * @use_atomic: True if the write_atomic callback is to be used
*
* Return: True if this context still owns the console. False if
* ownership was handed over or taken.
@@ -884,7 +900,7 @@ EXPORT_SYMBOL_GPL(nbcon_exit_unsafe);
* When true is returned, @wctxt->ctxt.backlog indicates whether there are
* still records pending in the ringbuffer,
*/
-static bool nbcon_emit_next_record(struct nbcon_write_context *wctxt, bool in_kthread)
+static bool nbcon_emit_next_record(struct nbcon_write_context *wctxt, bool use_atomic)
{
struct nbcon_context *ctxt = &ACCESS_PRIVATE(wctxt, ctxt);
struct console *con = ctxt->console;
@@ -934,19 +950,29 @@ static bool nbcon_emit_next_record(struct nbcon_write_context *wctxt, bool in_kt
nbcon_state_read(con, &cur);
wctxt->unsafe_takeover = cur.unsafe_takeover;
- if (!in_kthread && con->write_atomic) {
+ if (use_atomic &&
+ con->write_atomic) {
done = con->write_atomic(con, wctxt);
- } else if (in_kthread && con->write_thread && con->kthread) {
+
+ } else if (!use_atomic &&
+ con->write_thread &&
+ con->kthread) {
+ WARN_ON_ONCE(con->kthread != current);
done = con->write_thread(con, wctxt);
+
} else {
- nbcon_context_release(ctxt);
WARN_ON_ONCE(1);
done = false;
}
- /* If not done, the emit was aborted. */
- if (!done)
+ if (!done) {
+ /*
+ * The emit was aborted. This may have been due to a loss
+ * of ownership. Explicitly release ownership to be sure.
+ */
+ nbcon_context_release(ctxt);
return false;
+ }
/*
* Since any dropped message was successfully output, reset the
@@ -974,13 +1000,13 @@ static bool nbcon_emit_next_record(struct nbcon_write_context *wctxt, bool in_kt
}
/**
- * nbcon_kthread_should_wakeup - Check whether the printk thread should wakeup
+ * nbcon_kthread_should_wakeup - Check whether a printer thread should wakeup
* @con: Console to operate on
* @ctxt: The acquire context that contains the state
* at console_acquire()
*
- * Returns: True if the thread should shutdown or if the console is allowed to
- * print and a record is available. False otherwise
+ * Return: True if the thread should shutdown or if the console is
+ * allowed to print and a record is available. False otherwise.
*
* After the thread wakes up, it must first check if it should shutdown before
* attempting any printing.
@@ -992,25 +1018,28 @@ static bool nbcon_kthread_should_wakeup(struct console *con, struct nbcon_contex
short flags;
int cookie;
- if (kthread_should_stop())
- return true;
+ do {
+ if (kthread_should_stop())
+ return true;
- cookie = console_srcu_read_lock();
- flags = console_srcu_read_flags(con);
- is_usable = console_is_usable(con, flags, false);
- console_srcu_read_unlock(cookie);
+ cookie = console_srcu_read_lock();
+ flags = console_srcu_read_flags(con);
+ is_usable = console_is_usable(con, flags, false);
+ console_srcu_read_unlock(cookie);
- if (!is_usable)
- return false;
+ if (!is_usable)
+ return false;
- nbcon_state_read(con, &cur);
+ nbcon_state_read(con, &cur);
- /*
- * Atomic printing is running on some other CPU. The owner
- * will wake the console thread on unlock if necessary.
- */
- if (cur.prio != NBCON_PRIO_NONE)
- return false;
+ /*
+ * Some other CPU is using the console. Patiently poll
+ * to see if it becomes available. This is more efficient
+ * than having every release trigger an irq_work to wake
+ * the kthread.
+ */
+ msleep(1);
+ } while (cur.prio != NBCON_PRIO_NONE);
/* Bring the sequence in @ctxt up to date */
nbcon_context_seq_set(ctxt);
@@ -1019,7 +1048,7 @@ static bool nbcon_kthread_should_wakeup(struct console *con, struct nbcon_contex
}
/**
- * nbcon_kthread_func - The printk thread function
+ * nbcon_kthread_func - The printer thread function
* @__console: Console to operate on
*/
static int nbcon_kthread_func(void *__console)
@@ -1084,7 +1113,7 @@ static int nbcon_kthread_func(void *__console)
* If the emit fails, this context is no
* longer the owner.
*/
- if (nbcon_emit_next_record(&wctxt, true)) {
+ if (nbcon_emit_next_record(&wctxt, false)) {
nbcon_context_release(ctxt);
backlog = ctxt->backlog;
}
@@ -1160,40 +1189,37 @@ void nbcon_wake_threads(void)
console_srcu_read_unlock(cookie);
}
-/**
- * struct nbcon_cpu_state - Per CPU printk context state
- * @prio: The current context priority level
- * @nesting: Per priority nest counter
- */
-struct nbcon_cpu_state {
- enum nbcon_prio prio;
- int nesting[NBCON_PRIO_MAX];
-};
-
-static DEFINE_PER_CPU(struct nbcon_cpu_state, nbcon_pcpu_state);
-static struct nbcon_cpu_state early_nbcon_pcpu_state __initdata;
+/* Track the nbcon emergency nesting per CPU. */
+static DEFINE_PER_CPU(unsigned int, nbcon_pcpu_emergency_nesting);
+static unsigned int early_nbcon_pcpu_emergency_nesting __initdata;
/**
- * nbcon_get_cpu_state - Get the per CPU console state pointer
+ * nbcon_get_cpu_emergency_nesting - Get the per CPU emergency nesting pointer
*
- * Returns either a pointer to the per CPU state of the current CPU or to
- * the init data state during early boot.
+ * Return: Either a pointer to the per CPU emergency nesting counter of
+ * the current CPU or to the init data during early boot.
*/
-static __ref struct nbcon_cpu_state *nbcon_get_cpu_state(void)
+static __ref unsigned int *nbcon_get_cpu_emergency_nesting(void)
{
+ /*
+ * The value of __printk_percpu_data_ready gets set in normal
+ * context and before SMP initialization. As a result it could
+ * never change while inside an nbcon emergency section.
+ */
if (!printk_percpu_data_ready())
- return &early_nbcon_pcpu_state;
+ return &early_nbcon_pcpu_emergency_nesting;
- return this_cpu_ptr(&nbcon_pcpu_state);
+ return this_cpu_ptr(&nbcon_pcpu_emergency_nesting);
}
/**
- * nbcon_atomic_emit_one - Print one record for a console in atomic mode
+ * nbcon_atomic_emit_one - Print one record for an nbcon console using the
+ * write_atomic() callback
* @wctxt: An initialized write context struct to use
* for this context
*
- * Returns false if the given console could not print a record or there are
- * no more records to print, otherwise true.
+ * Return: False if the given console could not print a record or there
+ * are no more records to print, otherwise true.
*
* This is an internal helper to handle the locking of the console before
* calling nbcon_emit_next_record().
@@ -1210,36 +1236,53 @@ static bool nbcon_atomic_emit_one(struct nbcon_write_context *wctxt)
* handed over or taken over. In both cases the context is no
* longer valid.
*/
- if (!nbcon_emit_next_record(wctxt, false))
+ if (!nbcon_emit_next_record(wctxt, true))
return false;
nbcon_context_release(ctxt);
- return prb_read_valid(prb, ctxt->seq, NULL);
+ return ctxt->backlog;
}
/**
- * nbcon_console_emit_next_record - Print one record for an nbcon console
- * in atomic mode
+ * nbcon_get_default_prio - The appropriate nbcon priority to use for nbcon
+ * printing on the current CPU
+ *
+ * Return: The nbcon_prio to use for acquiring an nbcon console in this
+ * context for printing.
+ */
+enum nbcon_prio nbcon_get_default_prio(void)
+{
+ unsigned int *cpu_emergency_nesting;
+
+ if (this_cpu_in_panic())
+ return NBCON_PRIO_PANIC;
+
+ cpu_emergency_nesting = nbcon_get_cpu_emergency_nesting();
+ if (*cpu_emergency_nesting)
+ return NBCON_PRIO_EMERGENCY;
+
+ return NBCON_PRIO_NORMAL;
+}
+
+/**
+ * nbcon_atomic_emit_next_record - Print one record for an nbcon console
+ * using the write_atomic() callback
* @con: The console to print on
*
* Return: True if a record could be printed, otherwise false.
- * Context: Any context where migration is disabled.
+ * Context: Any context which could not be migrated to another CPU.
*
- * This function is meant to be called by console_flush_all() to atomically
- * print records on nbcon consoles. Essentially it is the nbcon version of
- * console_emit_next_record().
- *
- * This function also returns false if the current CPU is in an elevated
- * atomic priority state in order to allow the CPU to get all of the
- * emergency messages into the ringbuffer first.
+ * This function is meant to be called by console_flush_all() to print records
+ * on nbcon consoles using the write_atomic() callback. Essentially it is the
+ * nbcon version of console_emit_next_record().
*/
-bool nbcon_console_emit_next_record(struct console *con)
+bool nbcon_atomic_emit_next_record(struct console *con)
{
struct uart_port *port = con->uart_port(con);
static DEFINE_SPINLOCK(shared_spinlock);
- struct nbcon_cpu_state *cpu_state;
bool progress = false;
+ enum nbcon_prio prio;
unsigned long flags;
/*
@@ -1252,21 +1295,17 @@ bool nbcon_console_emit_next_record(struct console *con)
else
spin_lock_irqsave(&shared_spinlock, flags);
- cpu_state = nbcon_get_cpu_state();
-
/*
- * Atomic printing from console_flush_all() only occurs if this
- * CPU is not in an elevated atomic priority state. If it is, the
- * atomic printing will occur when this CPU exits that state. This
- * allows a set of emergency messages to be completely stored in
- * the ringbuffer before this CPU begins flushing.
+ * Do not emit for EMERGENCY priority. The console will be
+ * explicitly flushed when exiting the emergency section.
*/
- if (cpu_state->prio <= NBCON_PRIO_NORMAL) {
+ prio = nbcon_get_default_prio();
+ if (prio != NBCON_PRIO_EMERGENCY) {
struct nbcon_write_context wctxt = { };
struct nbcon_context *ctxt = &ACCESS_PRIVATE(&wctxt, ctxt);
ctxt->console = con;
- ctxt->prio = NBCON_PRIO_NORMAL;
+ ctxt->prio = prio;
progress = nbcon_atomic_emit_one(&wctxt);
}
@@ -1280,41 +1319,26 @@ bool nbcon_console_emit_next_record(struct console *con)
}
/**
- * __nbcon_atomic_flush_all - Flush all nbcon consoles in atomic mode
+ * __nbcon_atomic_flush_all - Flush all nbcon consoles using their
+ * write_atomic() callback
+ * @stop_seq: Flush up until this record
* @allow_unsafe_takeover: True, to allow unsafe hostile takeovers
*/
-static void __nbcon_atomic_flush_all(bool allow_unsafe_takeover)
+static void __nbcon_atomic_flush_all(u64 stop_seq, bool allow_unsafe_takeover)
{
struct nbcon_write_context wctxt = { };
struct nbcon_context *ctxt = &ACCESS_PRIVATE(&wctxt, ctxt);
- struct nbcon_cpu_state *cpu_state;
+ enum nbcon_prio prio = nbcon_get_default_prio();
struct console *con;
bool any_progress;
int cookie;
- cpu_state = nbcon_get_cpu_state();
-
- /*
- * Let the outermost flush of this priority print. This avoids
- * nasty hackery for nested WARN() where the printing itself
- * generates one and ensures such nested messages are stored to
- * the ringbuffer before any printing resumes.
- *
- * cpu_state->prio <= NBCON_PRIO_NORMAL is not subject to nesting
- * and can proceed in order to allow any atomic printing for
- * regular kernel messages.
- */
- if (cpu_state->prio > NBCON_PRIO_NORMAL &&
- cpu_state->nesting[cpu_state->prio] != 1)
- return;
-
do {
any_progress = false;
cookie = console_srcu_read_lock();
for_each_console_srcu(con) {
short flags = console_srcu_read_flags(con);
- bool progress;
if (!(flags & CON_NBCON))
continue;
@@ -1322,111 +1346,100 @@ static void __nbcon_atomic_flush_all(bool allow_unsafe_takeover)
if (!console_is_usable(con, flags, true))
continue;
+ if (nbcon_seq_read(con) >= stop_seq)
+ continue;
+
memset(ctxt, 0, sizeof(*ctxt));
ctxt->console = con;
ctxt->spinwait_max_us = 2000;
- ctxt->prio = cpu_state->prio;
+ ctxt->prio = prio;
ctxt->allow_unsafe_takeover = allow_unsafe_takeover;
- progress = nbcon_atomic_emit_one(&wctxt);
- if (!progress)
- continue;
- any_progress = true;
+ any_progress |= nbcon_atomic_emit_one(&wctxt);
}
console_srcu_read_unlock(cookie);
} while (any_progress);
}
/**
- * nbcon_atomic_flush_all - Flush all nbcon consoles in atomic mode
+ * nbcon_atomic_flush_all - Flush all nbcon consoles using their
+ * write_atomic() callback
*
- * Context: Any context where migration is disabled.
+ * Flush the backlog up through the currently newest record. Any new
+ * records added while flushing will not be flushed. This is to avoid
+ * one CPU printing unbounded because other CPUs continue to add records.
+ *
+ * Context: Any context which could not be migrated to another CPU.
*/
void nbcon_atomic_flush_all(void)
{
- __nbcon_atomic_flush_all(false);
+ __nbcon_atomic_flush_all(prb_next_reserve_seq(prb), false);
}
/**
- * nbcon_atomic_enter - Enter a context that enforces atomic printing
- * @prio: Priority of the context
+ * nbcon_atomic_flush_unsafe - Flush all nbcon consoles using their
+ * write_atomic() callback and allowing unsafe hostile takeovers
+ *
+ * Flush the backlog up through the currently newest record. Unsafe hostile
+ * takeovers will be performed, if necessary.
+ *
+ * Context: Any context which could not be migrated to another CPU.
+ */
+void nbcon_atomic_flush_unsafe(void)
+{
+ __nbcon_atomic_flush_all(prb_next_reserve_seq(prb), true);
+}
+
+/**
+ * nbcon_cpu_emergency_enter - Enter an emergency section where printk()
+ * messages for that CPU are only stored
+ *
+ * Upon exiting the emergency section, all stored messages are flushed.
*
- * Return: The previous priority that needs to be fed into
- * the corresponding nbcon_atomic_exit()
* Context: Any context. Disables preemption.
*
- * When within an atomic printing section, no atomic printing occurs. This
+ * When within an emergency section, no printing occurs on that CPU. This
* is to allow all emergency messages to be dumped into the ringbuffer before
- * flushing the ringbuffer. The actual atomic printing occurs when exiting
- * the outermost atomic printing section.
+ * flushing the ringbuffer. The actual printing occurs when exiting the
+ * outermost emergency section.
*/
-enum nbcon_prio nbcon_atomic_enter(enum nbcon_prio prio)
+void nbcon_cpu_emergency_enter(void)
{
- struct nbcon_cpu_state *cpu_state;
- enum nbcon_prio prev_prio;
+ unsigned int *cpu_emergency_nesting;
preempt_disable();
- cpu_state = nbcon_get_cpu_state();
-
- prev_prio = cpu_state->prio;
- if (prio > prev_prio)
- cpu_state->prio = prio;
-
- /*
- * Increment the nesting on @cpu_state->prio (instead of
- * @prio) so that a WARN() nested within a panic printout
- * does not attempt to scribble state.
- */
- cpu_state->nesting[cpu_state->prio]++;
-
- return prev_prio;
+ cpu_emergency_nesting = nbcon_get_cpu_emergency_nesting();
+ (*cpu_emergency_nesting)++;
}
/**
- * nbcon_atomic_exit - Exit a context that enforces atomic printing
- * @prio: Priority of the context to leave
- * @prev_prio: Priority of the previous context for restore
+ * nbcon_cpu_emergency_exit - Exit an emergency section and flush the
+ * stored messages
+ *
+ * Flushing only occurs when exiting all nesting for the CPU.
*
* Context: Any context. Enables preemption.
- *
- * @prev_prio is the priority returned by the corresponding
- * nbcon_atomic_enter().
*/
-void nbcon_atomic_exit(enum nbcon_prio prio, enum nbcon_prio prev_prio)
+void nbcon_cpu_emergency_exit(void)
{
- struct nbcon_cpu_state *cpu_state;
- u64 next_seq = prb_next_seq(prb);
+ unsigned int *cpu_emergency_nesting;
- __nbcon_atomic_flush_all(false);
+ cpu_emergency_nesting = nbcon_get_cpu_emergency_nesting();
- cpu_state = nbcon_get_cpu_state();
+ WARN_ON_ONCE(*cpu_emergency_nesting == 0);
- if (cpu_state->prio == NBCON_PRIO_PANIC)
- __nbcon_atomic_flush_all(true);
+ if (*cpu_emergency_nesting == 1)
+ printk_trigger_flush();
- /*
- * Undo the nesting of nbcon_atomic_enter() at the CPU state
- * priority.
- */
- cpu_state->nesting[cpu_state->prio]--;
-
- /*
- * Restore the previous priority, which was returned by
- * nbcon_atomic_enter().
- */
- cpu_state->prio = prev_prio;
-
- if (cpu_state->nesting[cpu_state->prio] == 0 &&
- prb_read_valid(prb, next_seq, NULL)) {
- nbcon_wake_threads();
- }
+ /* Undo the nesting count of nbcon_cpu_emergency_enter(). */
+ (*cpu_emergency_nesting)--;
preempt_enable();
}
/**
- * nbcon_kthread_stop - Stop a printk thread
+ * nbcon_kthread_stop - Stop a printer thread
* @con: Console to operate on
*/
static void nbcon_kthread_stop(struct console *con)
@@ -1441,7 +1454,7 @@ static void nbcon_kthread_stop(struct console *con)
}
/**
- * nbcon_kthread_create - Create a printk thread
+ * nbcon_kthread_create - Create a printer thread
* @con: Console to operate on
*
* If it fails, let the console proceed. The atomic part might
@@ -1490,7 +1503,7 @@ static int __init printk_setup_threads(void)
printk_threads_enabled = true;
for_each_console(con)
nbcon_kthread_create(con);
- if (IS_ENABLED(CONFIG_PREEMPT_RT) && serialized_printing)
+ if (IS_ENABLED(CONFIG_PREEMPT_RT) && printing_via_unlock)
nbcon_legacy_kthread_create();
console_list_unlock();
return 0;
@@ -1591,6 +1604,9 @@ static inline bool uart_is_nbcon(struct uart_port *up)
*
* If @up is an nbcon console, this console will be acquired and marked as
* unsafe. Otherwise this function does nothing.
+ *
+ * nbcon consoles acquired via the port lock wrapper always use priority
+ * NBCON_PRIO_NORMAL.
*/
void nbcon_handle_port_lock(struct uart_port *up)
{
@@ -1625,6 +1641,9 @@ EXPORT_SYMBOL_GPL(nbcon_handle_port_lock);
*
* If @up is an nbcon console, the console will be marked as safe and
* released. Otherwise this function does nothing.
+ *
+ * nbcon consoles acquired via the port lock wrapper always use priority
+ * NBCON_PRIO_NORMAL.
*/
void nbcon_handle_port_unlock(struct uart_port *up)
{
@@ -349,6 +349,29 @@ static bool panic_in_progress(void)
return unlikely(atomic_read(&panic_cpu) != PANIC_CPU_INVALID);
}
+/* Return true if a panic is in progress on the current CPU. */
+bool this_cpu_in_panic(void)
+{
+ /*
+ * We can use raw_smp_processor_id() here because it is impossible for
+ * the task to be migrated to the panic_cpu, or away from it. If
+ * panic_cpu has already been set, and we're not currently executing on
+ * that CPU, then we never will be.
+ */
+ return unlikely(atomic_read(&panic_cpu) == raw_smp_processor_id());
+}
+
+/*
+ * Return true if a panic is in progress on a remote CPU.
+ *
+ * On true, the local CPU should immediately release any printing resources
+ * that may be needed by the panic CPU.
+ */
+bool other_cpu_in_panic(void)
+{
+ return (panic_in_progress() && !this_cpu_in_panic());
+}
+
/*
* This is used for debugging the mess that is the VT code by
* keeping track if we have the console semaphore held. It's
@@ -441,14 +464,17 @@ static int console_msg_format = MSG_FORMAT_DEFAULT;
static DEFINE_MUTEX(syslog_lock);
/*
- * Specifies if a legacy console is registered. See serialized_printing
- * for details.
+ * Specifies if a legacy console is registered. If legacy consoles are
+ * present, it is necessary to perform the console_lock/console_unlock dance
+ * whenever console flushing should occur.
*/
bool have_legacy_console;
/*
- * Specifies if a boot console is registered. See serialized_printing
- * for details.
+ * Specifies if a boot console is registered. If boot consoles are present,
+ * nbcon consoles cannot print simultaneously and must be synchronized by
+ * the console lock. This is because boot consoles and nbcon consoles may
+ * have mapped the same hardware.
*/
bool have_boot_console;
@@ -1864,10 +1890,23 @@ static bool console_waiter;
*/
static void console_lock_spinning_enable(void)
{
+ /*
+ * Do not use spinning in panic(). The panic CPU wants to keep the lock.
+ * Non-panic CPUs abandon the flush anyway.
+ *
+ * Just keep the lockdep annotation. The panic-CPU should avoid
+ * taking console_owner_lock because it might cause a deadlock.
+ * This looks like the easiest way how to prevent false lockdep
+ * reports without handling races a lockless way.
+ */
+ if (panic_in_progress())
+ goto lockdep;
+
raw_spin_lock(&console_owner_lock);
console_owner = current;
raw_spin_unlock(&console_owner_lock);
+lockdep:
/* The waiter may spin on us after setting console_owner */
spin_acquire(&console_owner_dep_map, 0, 0, _THIS_IP_);
}
@@ -1892,6 +1931,22 @@ static int console_lock_spinning_disable_and_check(int cookie)
{
int waiter;
+ /*
+ * Ignore spinning waiters during panic() because they might get stopped
+ * or blocked at any time,
+ *
+ * It is safe because nobody is allowed to start spinning during panic
+ * in the first place. If there has been a waiter then non panic CPUs
+ * might stay spinning. They would get stopped anyway. The panic context
+ * will never start spinning and an interrupted spin on panic CPU will
+ * never continue.
+ */
+ if (panic_in_progress()) {
+ /* Keep lockdep happy. */
+ spin_release(&console_owner_dep_map, _THIS_IP_);
+ return 0;
+ }
+
raw_spin_lock(&console_owner_lock);
waiter = READ_ONCE(console_waiter);
console_owner = NULL;
@@ -2281,30 +2336,71 @@ asmlinkage int vprintk_emit(int facility, int level,
const struct dev_printk_info *dev_info,
const char *fmt, va_list args)
{
- bool print_direct = serialized_printing && !IS_ENABLED(CONFIG_PREEMPT_RT);
+ static atomic_t panic_noise_count = ATOMIC_INIT(0);
+
+ bool do_trylock_unlock = printing_via_unlock && !IS_ENABLED(CONFIG_PREEMPT_RT);
int printed_len;
/* Suppress unimportant messages after panic happens */
if (unlikely(suppress_printk))
return 0;
- if (unlikely(suppress_panic_printk) &&
- atomic_read(&panic_cpu) != raw_smp_processor_id())
- return 0;
+ if (other_cpu_in_panic()) {
+ if (unlikely(suppress_panic_printk))
+ return 0;
+
+ /*
+ * The messages on the panic CPU are the most important. If
+ * non-panic CPUs are generating many messages, the panic
+ * messages could get lost. Limit the number of non-panic
+ * messages to approximately 1/4 of the ringbuffer.
+ */
+ if (atomic_inc_return_relaxed(&panic_noise_count) >
+ (1 << (prb->desc_ring.count_bits - 2))) {
+ suppress_panic_printk = 1;
+ return 0;
+ }
+ }
if (level == LOGLEVEL_SCHED) {
level = LOGLEVEL_DEFAULT;
/* If called from the scheduler, we can not call up(). */
- print_direct = false;
+ do_trylock_unlock = false;
}
printk_delay(level);
printed_len = vprintk_store(facility, level, dev_info, fmt, args);
+ /*
+ * There are 3 situations where nbcon atomic printing should happen in
+ * the printk() caller context:
+ *
+ * 1. When booting, before the printing threads have been started.
+ *
+ * 2. During shutdown, since the printing threads may not get a
+ * chance to print the final messages.
+ *
+ * 3. When this CPU is in panic.
+ *
+ * Note that if boot consoles are registered (have_boot_console), the
+ * console_lock/console_unlock dance must be relied upon instead
+ * because nbcon consoles cannot print simultaneously with boot
+ * consoles.
+ */
+ if (!have_boot_console) {
+ if (!printk_threads_enabled ||
+ (system_state > SYSTEM_RUNNING) ||
+ this_cpu_in_panic()) {
+ preempt_disable();
+ nbcon_atomic_flush_all();
+ preempt_enable();
+ }
+ }
+
nbcon_wake_threads();
- if (print_direct) {
+ if (do_trylock_unlock) {
/*
* The caller may be holding system-critical or
* timing-sensitive locks. Disable preemption during
@@ -2313,16 +2409,20 @@ asmlinkage int vprintk_emit(int facility, int level,
* another printk() caller will take over the printing.
*/
preempt_disable();
- /*
- * Try to acquire and then immediately release the console
- * semaphore. The release will print out buffers. With the
- * spinning variant, this context tries to take over the
- * printing from another printing context.
- */
- if (console_trylock_spinning())
- console_unlock();
+ if (nbcon_get_default_prio() != NBCON_PRIO_EMERGENCY) {
+ /*
+ * Try to acquire and then immediately release the
+ * console semaphore. The release will print out
+ * buffers. With the spinning variant, this context
+ * tries to take over the printing from another
+ * printing context.
+ */
+ if (console_trylock_spinning())
+ console_unlock();
+ }
preempt_enable();
+ wake_up_klogd();
} else {
defer_console_output();
}
@@ -2629,7 +2729,7 @@ void resume_console(void)
*/
static int console_cpu_notify(unsigned int cpu)
{
- if (!cpuhp_tasks_frozen && serialized_printing &&
+ if (!cpuhp_tasks_frozen && printing_via_unlock &&
!IS_ENABLED(CONFIG_PREEMPT_RT)) {
/* If trylock fails, someone else is doing the printing */
if (console_trylock())
@@ -2638,26 +2738,6 @@ static int console_cpu_notify(unsigned int cpu)
return 0;
}
-/*
- * Return true if a panic is in progress on a remote CPU.
- *
- * On true, the local CPU should immediately release any printing resources
- * that may be needed by the panic CPU.
- */
-bool other_cpu_in_panic(void)
-{
- if (!panic_in_progress())
- return false;
-
- /*
- * We can use raw_smp_processor_id() here because it is impossible for
- * the task to be migrated to the panic_cpu, or away from it. If
- * panic_cpu has already been set, and we're not currently executing on
- * that CPU, then we never will be.
- */
- return atomic_read(&panic_cpu) != raw_smp_processor_id();
-}
-
/**
* console_lock - block the console subsystem from printing
*
@@ -2783,8 +2863,6 @@ void console_prepend_dropped(struct printk_message *pmsg, unsigned long dropped)
bool printk_get_next_message(struct printk_message *pmsg, u64 seq,
bool is_extended, bool may_suppress)
{
- static int panic_console_dropped;
-
struct printk_buffers *pbufs = pmsg->pbufs;
const size_t scratchbuf_sz = sizeof(pbufs->scratchbuf);
const size_t outbuf_sz = sizeof(pbufs->outbuf);
@@ -2812,17 +2890,6 @@ bool printk_get_next_message(struct printk_message *pmsg, u64 seq,
pmsg->seq = r.info->seq;
pmsg->dropped = r.info->seq - seq;
- /*
- * Check for dropped messages in panic here so that printk
- * suppression can occur as early as possible if necessary.
- */
- if (pmsg->dropped &&
- panic_in_progress() &&
- panic_console_dropped++ > 10) {
- suppress_panic_printk = 1;
- pr_warn_once("Too many dropped messages. Suppress messages on non-panic CPUs to prevent livelock.\n");
- }
-
/* Skip record that has level above the console loglevel. */
if (may_suppress && suppress_message_printing(r.info->level))
goto out;
@@ -2988,7 +3055,7 @@ static bool console_flush_all(bool do_cond_resched, u64 *next_seq, bool *handove
any_usable = true;
if (flags & CON_NBCON) {
- progress = nbcon_console_emit_next_record(con);
+ progress = nbcon_atomic_emit_next_record(con);
printk_seq = nbcon_seq_read(con);
} else {
progress = console_emit_next_record(con, handover, cookie);
@@ -3233,9 +3300,10 @@ void console_flush_on_panic(enum con_flush_mode mode)
console_srcu_read_unlock(cookie);
}
- nbcon_atomic_flush_all();
+ if (!have_boot_console)
+ nbcon_atomic_flush_all();
- if (serialized_printing)
+ if (printing_via_unlock)
console_flush_all(false, &next_seq, &handover);
}
@@ -3329,16 +3397,29 @@ static bool printer_should_wake(u64 seq)
cookie = console_srcu_read_lock();
for_each_console_srcu(con) {
short flags = console_srcu_read_flags(con);
+ u64 printk_seq;
- if (flags & CON_NBCON)
+ /*
+ * The legacy printer thread is only for legacy consoles,
+ * unless the nbcon console has no kthread printer.
+ */
+ if ((flags & CON_NBCON) && con->kthread)
continue;
+
if (!console_is_usable(con, flags, true))
continue;
- /*
- * It is safe to read @seq because only this
- * thread context updates @seq.
- */
- if (prb_read_valid(prb, con->seq, NULL)) {
+
+ if (flags & CON_NBCON) {
+ printk_seq = nbcon_seq_read(con);
+ } else {
+ /*
+ * It is safe to read @seq because only this
+ * thread context updates @seq.
+ */
+ printk_seq = con->seq;
+ }
+
+ if (prb_read_valid(prb, printk_seq, NULL)) {
available = true;
break;
}
@@ -3761,12 +3842,12 @@ static int unregister_console_locked(struct console *console)
res = console->exit(console);
/*
- * If the current console was a boot and/or legacy console, the
+ * If this console was a boot and/or legacy console, the
* related global flags might need to be updated.
*/
if (is_boot_con || is_legacy_con) {
- bool found_boot_con = false;
bool found_legacy_con = false;
+ bool found_boot_con = false;
for_each_console(c) {
if (c->flags & CON_BOOT)
@@ -3790,7 +3871,7 @@ static int unregister_console_locked(struct console *console)
}
#ifdef CONFIG_PRINTK
- if (!serialized_printing && nbcon_legacy_kthread) {
+ if (!printing_via_unlock && nbcon_legacy_kthread) {
kthread_stop(nbcon_legacy_kthread);
nbcon_legacy_kthread = NULL;
}
@@ -3940,7 +4021,8 @@ late_initcall(printk_late_init);
/* If @con is specified, only wait for that console. Otherwise wait for all. */
static bool __pr_flush(struct console *con, int timeout_ms, bool reset_on_progress)
{
- int remaining = timeout_ms;
+ unsigned long timeout_jiffies = msecs_to_jiffies(timeout_ms);
+ unsigned long remaining_jiffies = timeout_jiffies;
struct console *c;
u64 last_diff = 0;
u64 printk_seq;
@@ -3952,23 +4034,26 @@ static bool __pr_flush(struct console *con, int timeout_ms, bool reset_on_progre
might_sleep();
- seq = prb_next_seq(prb);
+ seq = prb_next_reserve_seq(prb);
/*
* Flush the consoles so that records up to @seq are printed.
* Otherwise this function will just wait for the threaded printers
* to print up to @seq.
*/
- if (serialized_printing && !IS_ENABLED(CONFIG_PREEMPT_RT)) {
+ if (printing_via_unlock && !IS_ENABLED(CONFIG_PREEMPT_RT)) {
console_lock();
console_unlock();
}
for (;;) {
+ unsigned long begin_jiffies;
+ unsigned long slept_jiffies;
+
locked = false;
diff = 0;
- if (serialized_printing) {
+ if (printing_via_unlock) {
/*
* Hold the console_lock to guarantee safe access to
* console->seq. Releasing console_lock flushes more
@@ -4009,20 +4094,21 @@ static bool __pr_flush(struct console *con, int timeout_ms, bool reset_on_progre
console_srcu_read_unlock(cookie);
if (diff != last_diff && reset_on_progress)
- remaining = timeout_ms;
+ remaining_jiffies = timeout_jiffies;
if (locked)
console_unlock();
/* Note: @diff is 0 if there are no usable consoles. */
- if (diff == 0 || remaining == 0)
+ if (diff == 0 || remaining_jiffies == 0)
break;
+ /* msleep(1) might sleep much longer. Check time by jiffies. */
+ begin_jiffies = jiffies;
msleep(1);
+ slept_jiffies = jiffies - begin_jiffies;
- /* If @remaining < 0, there is no timeout limit. */
- if (remaining > 0)
- remaining--;
+ remaining_jiffies -= min(slept_jiffies, remaining_jiffies);
last_diff = diff;
}
@@ -4142,16 +4228,26 @@ void defer_console_output(void)
*/
int val = PRINTK_PENDING_WAKEUP;
- if (serialized_printing)
+ if (printing_via_unlock)
val |= PRINTK_PENDING_OUTPUT;
__wake_up_klogd(val);
}
+/**
+ * printk_trigger_flush() - Make sure that the consoles will get flushed
+ *
+ * Try to flush consoles when possible or queue flushing consoles like
+ * in the deferred printk.
+ *
+ * Context: Can be used in any context
+ */
void printk_trigger_flush(void)
{
- preempt_disable();
- nbcon_atomic_flush_all();
- preempt_enable();
+ if (!have_boot_console) {
+ preempt_disable();
+ nbcon_atomic_flush_all();
+ preempt_enable();
+ }
nbcon_wake_threads();
defer_console_output();
@@ -6,6 +6,7 @@
#include <linux/errno.h>
#include <linux/bug.h>
#include "printk_ringbuffer.h"
+#include "internal.h"
/**
* DOC: printk_ringbuffer overview
@@ -303,6 +304,9 @@
*
* desc_push_tail:B / desc_reserve:D
* set descriptor reusable (state), then push descriptor tail (id)
+ *
+ * desc_update_last_finalized:A / desc_last_finalized_seq:A
+ * store finalized record, then set new highest finalized sequence number
*/
#define DATA_SIZE(data_ring) _DATA_SIZE((data_ring)->size_bits)
@@ -1030,9 +1034,13 @@ static char *data_alloc(struct printk_ringbuffer *rb, unsigned int size,
unsigned long next_lpos;
if (size == 0) {
- /* Specify a data-less block. */
- blk_lpos->begin = NO_LPOS;
- blk_lpos->next = NO_LPOS;
+ /*
+ * Data blocks are not created for empty lines. Instead, the
+ * reader will recognize these special lpos values and handle
+ * it appropriately.
+ */
+ blk_lpos->begin = EMPTY_LINE_LPOS;
+ blk_lpos->next = EMPTY_LINE_LPOS;
return NULL;
}
@@ -1210,10 +1218,18 @@ static const char *get_data(struct prb_data_ring *data_ring,
/* Data-less data block description. */
if (BLK_DATALESS(blk_lpos)) {
- if (blk_lpos->begin == NO_LPOS && blk_lpos->next == NO_LPOS) {
+ /*
+ * Records that are just empty lines are also valid, even
+ * though they do not have a data block. For such records
+ * explicitly return empty string data to signify success.
+ */
+ if (blk_lpos->begin == EMPTY_LINE_LPOS &&
+ blk_lpos->next == EMPTY_LINE_LPOS) {
*data_size = 0;
return "";
}
+
+ /* Data lost, invalid, or otherwise unavailable. */
return NULL;
}
@@ -1441,20 +1457,144 @@ bool prb_reserve_in_last(struct prb_reserved_entry *e, struct printk_ringbuffer
return false;
}
+#ifdef CONFIG_64BIT
+
+#define __u64seq_to_ulseq(u64seq) (u64seq)
+#define __ulseq_to_u64seq(ulseq) (ulseq)
+
+#else /* CONFIG_64BIT */
+
+static u64 prb_first_seq(struct printk_ringbuffer *rb);
+
+#define __u64seq_to_ulseq(u64seq) ((u32)u64seq)
+static inline u64 __ulseq_to_u64seq(u32 ulseq)
+{
+ u64 rb_first_seq = prb_first_seq(prb);
+ u64 seq;
+
+ /*
+ * The provided sequence is only the lower 32 bits of the ringbuffer
+ * sequence. It needs to be expanded to 64bit. Get the first sequence
+ * number from the ringbuffer and fold it.
+ */
+ seq = rb_first_seq - ((u32)rb_first_seq - ulseq);
+
+ return seq;
+}
+
+#endif /* CONFIG_64BIT */
+
+/*
+ * @last_finalized_seq value guarantees that all records up to and including
+ * this sequence number are finalized and can be read. The only exception are
+ * too old records which have already been overwritten.
+ *
+ * It is also guaranteed that @last_finalized_seq only increases.
+ *
+ * Be aware that finalized records following non-finalized records are not
+ * reported because they are not yet available to the reader. For example,
+ * a new record stored via printk() will not be available to a printer if
+ * it follows a record that has not been finalized yet. However, once that
+ * non-finalized record becomes finalized, @last_finalized_seq will be
+ * appropriately updated and the full set of finalized records will be
+ * available to the printer. And since each printk() caller will either
+ * directly print or trigger deferred printing of all available unprinted
+ * records, all printk() messages will get printed.
+ */
+static u64 desc_last_finalized_seq(struct prb_desc_ring *desc_ring)
+{
+ unsigned long ulseq;
+
+ /*
+ * Guarantee the sequence number is loaded before loading the
+ * associated record in order to guarantee that the record can be
+ * seen by this CPU. This pairs with desc_update_last_finalized:A.
+ */
+ ulseq = atomic_long_read_acquire(&desc_ring->last_finalized_seq
+ ); /* LMM(desc_last_finalized_seq:A) */
+
+ return __ulseq_to_u64seq(ulseq);
+}
+
+static bool _prb_read_valid(struct printk_ringbuffer *rb, u64 *seq,
+ struct printk_record *r, unsigned int *line_count);
+
+/*
+ * Check if there are records directly following @last_finalized_seq that are
+ * finalized. If so, update @last_finalized_seq to the latest of these
+ * records. It is not allowed to skip over records that are not yet finalized.
+ */
+static void desc_update_last_finalized(struct printk_ringbuffer *rb)
+{
+ struct prb_desc_ring *desc_ring = &rb->desc_ring;
+ u64 old_seq = desc_last_finalized_seq(desc_ring);
+ unsigned long oldval;
+ unsigned long newval;
+ u64 finalized_seq;
+ u64 try_seq;
+
+try_again:
+ finalized_seq = old_seq;
+ try_seq = finalized_seq + 1;
+
+ /* Try to find later finalized records. */
+ while (_prb_read_valid(rb, &try_seq, NULL, NULL)) {
+ finalized_seq = try_seq;
+ try_seq++;
+ }
+
+ /* No update needed if no later finalized record was found. */
+ if (finalized_seq == old_seq)
+ return;
+
+ oldval = __u64seq_to_ulseq(old_seq);
+ newval = __u64seq_to_ulseq(finalized_seq);
+
+ /*
+ * Set the sequence number of a later finalized record that has been
+ * seen.
+ *
+ * Guarantee the record data is visible to other CPUs before storing
+ * its sequence number. This pairs with desc_last_finalized_seq:A.
+ *
+ * Memory barrier involvement:
+ *
+ * If desc_last_finalized_seq:A reads from
+ * desc_update_last_finalized:A, then desc_read:A reads from
+ * _prb_commit:B.
+ *
+ * Relies on:
+ *
+ * RELEASE from _prb_commit:B to desc_update_last_finalized:A
+ * matching
+ * ACQUIRE from desc_last_finalized_seq:A to desc_read:A
+ *
+ * Note: _prb_commit:B and desc_update_last_finalized:A can be
+ * different CPUs. However, the desc_update_last_finalized:A
+ * CPU (which performs the release) must have previously seen
+ * _prb_commit:B.
+ */
+ if (!atomic_long_try_cmpxchg_release(&desc_ring->last_finalized_seq,
+ &oldval, newval)) { /* LMM(desc_update_last_finalized:A) */
+ old_seq = __ulseq_to_u64seq(oldval);
+ goto try_again;
+ }
+}
+
/*
* Attempt to finalize a specified descriptor. If this fails, the descriptor
* is either already final or it will finalize itself when the writer commits.
*/
-static void desc_make_final(struct prb_desc_ring *desc_ring, unsigned long id)
+static void desc_make_final(struct printk_ringbuffer *rb, unsigned long id)
{
+ struct prb_desc_ring *desc_ring = &rb->desc_ring;
unsigned long prev_state_val = DESC_SV(id, desc_committed);
struct prb_desc *d = to_desc(desc_ring, id);
- atomic_long_cmpxchg_relaxed(&d->state_var, prev_state_val,
- DESC_SV(id, desc_finalized)); /* LMM(desc_make_final:A) */
-
- /* Best effort to remember the last finalized @id. */
- atomic_long_set(&desc_ring->last_finalized_id, id);
+ if (atomic_long_try_cmpxchg_relaxed(&d->state_var, &prev_state_val,
+ DESC_SV(id, desc_finalized))) { /* LMM(desc_make_final:A) */
+ desc_update_last_finalized(rb);
+ }
}
/**
@@ -1550,7 +1690,7 @@ bool prb_reserve(struct prb_reserved_entry *e, struct printk_ringbuffer *rb,
* readers. (For seq==0 there is no previous descriptor.)
*/
if (info->seq > 0)
- desc_make_final(desc_ring, DESC_ID(id - 1));
+ desc_make_final(rb, DESC_ID(id - 1));
r->text_buf = data_alloc(rb, r->text_buf_size, &d->text_blk_lpos, id);
/* If text data allocation fails, a data-less record is committed. */
@@ -1643,7 +1783,7 @@ void prb_commit(struct prb_reserved_entry *e)
*/
head_id = atomic_long_read(&desc_ring->head_id); /* LMM(prb_commit:A) */
if (head_id != e->id)
- desc_make_final(desc_ring, e->id);
+ desc_make_final(e->rb, e->id);
}
/**
@@ -1663,12 +1803,9 @@ void prb_commit(struct prb_reserved_entry *e)
*/
void prb_final_commit(struct prb_reserved_entry *e)
{
- struct prb_desc_ring *desc_ring = &e->rb->desc_ring;
-
_prb_commit(e, desc_finalized);
- /* Best effort to remember the last finalized @id. */
- atomic_long_set(&desc_ring->last_finalized_id, e->id);
+ desc_update_last_finalized(e->rb);
}
/*
@@ -1875,12 +2012,114 @@ static u64 prb_first_seq(struct printk_ringbuffer *rb)
return seq;
}
-/*
- * Non-blocking read of a record. Updates @seq to the last finalized record
- * (which may have no data available).
+/**
+ * prb_next_reserve_seq() - Get the sequence number after the most recently
+ * reserved record.
*
- * See the description of prb_read_valid() and prb_read_valid_info()
- * for details.
+ * @rb: The ringbuffer to get the sequence number from.
+ *
+ * This is the public function available to readers to see what sequence
+ * number will be assigned to the next reserved record.
+ *
+ * Note that depending on the situation, this value can be equal to or
+ * higher than the sequence number returned by prb_next_seq().
+ *
+ * Context: Any context.
+ * Return: The sequence number that will be assigned to the next record
+ * reserved.
+ */
+u64 prb_next_reserve_seq(struct printk_ringbuffer *rb)
+{
+ struct prb_desc_ring *desc_ring = &rb->desc_ring;
+ unsigned long last_finalized_id;
+ atomic_long_t *state_var;
+ u64 last_finalized_seq;
+ unsigned long head_id;
+ struct prb_desc desc;
+ unsigned long diff;
+ struct prb_desc *d;
+ int err;
+
+ /*
+ * It may not be possible to read a sequence number for @head_id.
+ * So the ID of @last_finailzed_seq is used to calculate what the
+ * sequence number of @head_id will be.
+ */
+
+try_again:
+ last_finalized_seq = desc_last_finalized_seq(desc_ring);
+
+ /*
+ * @head_id is loaded after @last_finalized_seq to ensure that it is
+ * at or beyond @last_finalized_seq.
+ *
+ * Memory barrier involvement:
+ *
+ * If desc_last_finalized_seq:A reads from
+ * desc_update_last_finalized:A, then
+ * prb_next_reserve_seq:A reads from desc_reserve:D.
+ *
+ * Relies on:
+ *
+ * RELEASE from desc_reserve:D to desc_update_last_finalized:A
+ * matching
+ * ACQUIRE from desc_last_finalized_seq:A to prb_next_reserve_seq:A
+ *
+ * Note: desc_reserve:D and desc_update_last_finalized:A can be
+ * different CPUs. However, the desc_update_last_finalized:A CPU
+ * (which performs the release) must have previously seen
+ * desc_read:C, which implies desc_reserve:D can be seen.
+ */
+ head_id = atomic_long_read(&desc_ring->head_id); /* LMM(prb_next_reserve_seq:A) */
+
+ d = to_desc(desc_ring, last_finalized_seq);
+ state_var = &d->state_var;
+
+ /* Extract the ID, used to specify the descriptor to read. */
+ last_finalized_id = DESC_ID(atomic_long_read(state_var));
+
+ /* Ensure @last_finalized_id is correct. */
+ err = desc_read_finalized_seq(desc_ring, last_finalized_id, last_finalized_seq, &desc);
+
+ if (err == -EINVAL) {
+ if (last_finalized_seq == 0) {
+ /*
+ * @last_finalized_seq still contains its initial
+ * value. Probably no record has been finalized yet.
+ * This means the ringbuffer is not yet full and the
+ * @head_id value can be used directly (subtracting
+ * off its initial value).
+ *
+ * Because of hack#2 of the bootstrapping phase, the
+ * @head_id initial value must be handled separately.
+ */
+ if (head_id == DESC0_ID(desc_ring->count_bits))
+ return 0;
+
+ last_finalized_id = DESC0_ID(desc_ring->count_bits) + 1;
+ } else {
+ /* Record must have been overwritten. Try again. */
+ goto try_again;
+ }
+ }
+
+ diff = head_id - last_finalized_id;
+
+ return (last_finalized_seq + diff + 1);
+}
+
+/*
+ * Non-blocking read of a record.
+ *
+ * On success @seq is updated to the record that was read and (if provided)
+ * @r and @line_count will contain the read/calculated data.
+ *
+ * On failure @seq is updated to a record that is not yet available to the
+ * reader, but it will be the next record available to the reader.
+ *
+ * Note: When the current CPU is in panic, this function will skip over any
+ * non-existent/non-finalized records in order to allow the panic CPU
+ * to print any and all records that have been finalized.
*/
static bool _prb_read_valid(struct printk_ringbuffer *rb, u64 *seq,
struct printk_record *r, unsigned int *line_count)
@@ -1899,12 +2138,26 @@ static bool _prb_read_valid(struct printk_ringbuffer *rb, u64 *seq,
*seq = tail_seq;
} else if (err == -ENOENT) {
- /* Record exists, but no data available. Skip. */
+ /* Record exists, but the data was lost. Skip. */
(*seq)++;
} else {
- /* Non-existent/non-finalized record. Must stop. */
- return false;
+ /*
+ * Non-existent/non-finalized record. Must stop.
+ *
+ * For panic situations it cannot be expected that
+ * non-finalized records will become finalized. But
+ * there may be other finalized records beyond that
+ * need to be printed for a panic situation. If this
+ * is the panic CPU, skip this
+ * non-existent/non-finalized record unless it is
+ * at or beyond the head, in which case it is not
+ * possible to continue.
+ */
+ if (this_cpu_in_panic() && ((*seq + 1) < prb_next_reserve_seq(rb)))
+ (*seq)++;
+ else
+ return false;
}
}
@@ -1932,7 +2185,7 @@ static bool _prb_read_valid(struct printk_ringbuffer *rb, u64 *seq,
* On success, the reader must check r->info.seq to see which record was
* actually read. This allows the reader to detect dropped records.
*
- * Failure means @seq refers to a not yet written record.
+ * Failure means @seq refers to a record not yet available to the reader.
*/
bool prb_read_valid(struct printk_ringbuffer *rb, u64 seq,
struct printk_record *r)
@@ -1962,7 +2215,7 @@ bool prb_read_valid(struct printk_ringbuffer *rb, u64 seq,
* On success, the reader must check info->seq to see which record meta data
* was actually read. This allows the reader to detect dropped records.
*
- * Failure means @seq refers to a not yet written record.
+ * Failure means @seq refers to a record not yet available to the reader.
*/
bool prb_read_valid_info(struct printk_ringbuffer *rb, u64 seq,
struct printk_info *info, unsigned int *line_count)
@@ -2008,7 +2261,9 @@ u64 prb_first_valid_seq(struct printk_ringbuffer *rb)
* newest sequence number available to readers will be.
*
* This provides readers a sequence number to jump to if all currently
- * available records should be skipped.
+ * available records should be skipped. It is guaranteed that all records
+ * previous to the returned value have been finalized and are (or were)
+ * available to the reader.
*
* Context: Any context.
* Return: The sequence number of the next newest (not yet available) record
@@ -2017,33 +2272,19 @@ u64 prb_first_valid_seq(struct printk_ringbuffer *rb)
u64 prb_next_seq(struct printk_ringbuffer *rb)
{
struct prb_desc_ring *desc_ring = &rb->desc_ring;
- enum desc_state d_state;
- unsigned long id;
u64 seq;
- /* Check if the cached @id still points to a valid @seq. */
- id = atomic_long_read(&desc_ring->last_finalized_id);
- d_state = desc_read(desc_ring, id, NULL, &seq, NULL);
+ seq = desc_last_finalized_seq(desc_ring);
- if (d_state == desc_finalized || d_state == desc_reusable) {
- /*
- * Begin searching after the last finalized record.
- *
- * On 0, the search must begin at 0 because of hack#2
- * of the bootstrapping phase it is not known if a
- * record at index 0 exists.
- */
- if (seq != 0)
- seq++;
- } else {
- /*
- * The information about the last finalized sequence number
- * has gone. It should happen only when there is a flood of
- * new messages and the ringbuffer is rapidly recycled.
- * Give up and start from the beginning.
- */
- seq = 0;
- }
+ /*
+ * Begin searching after the last finalized record.
+ *
+ * On 0, the search must begin at 0 because of hack#2
+ * of the bootstrapping phase it is not known if a
+ * record at index 0 exists.
+ */
+ if (seq != 0)
+ seq++;
/*
* The information about the last finalized @seq might be inaccurate.
@@ -2085,7 +2326,7 @@ void prb_init(struct printk_ringbuffer *rb,
rb->desc_ring.infos = infos;
atomic_long_set(&rb->desc_ring.head_id, DESC0_ID(descbits));
atomic_long_set(&rb->desc_ring.tail_id, DESC0_ID(descbits));
- atomic_long_set(&rb->desc_ring.last_finalized_id, DESC0_ID(descbits));
+ atomic_long_set(&rb->desc_ring.last_finalized_seq, 0);
rb->text_data_ring.size_bits = textbits;
rb->text_data_ring.data = text_buf;
@@ -75,7 +75,7 @@ struct prb_desc_ring {
struct printk_info *infos;
atomic_long_t head_id;
atomic_long_t tail_id;
- atomic_long_t last_finalized_id;
+ atomic_long_t last_finalized_seq;
};
/*
@@ -127,8 +127,22 @@ enum desc_state {
#define DESC_SV(id, state) (((unsigned long)state << DESC_FLAGS_SHIFT) | id)
#define DESC_ID_MASK (~DESC_FLAGS_MASK)
#define DESC_ID(sv) ((sv) & DESC_ID_MASK)
+
+/*
+ * Special data block logical position values (for fields of
+ * @prb_desc.text_blk_lpos).
+ *
+ * - Bit0 is used to identify if the record has no data block. (Implemented in
+ * the LPOS_DATALESS() macro.)
+ *
+ * - Bit1 specifies the reason for not having a data block.
+ *
+ * These special values could never be real lpos values because of the
+ * meta data and alignment padding of data blocks. (See to_blk_size() for
+ * details.)
+ */
#define FAILED_LPOS 0x1
-#define NO_LPOS 0x3
+#define EMPTY_LINE_LPOS 0x3
#define FAILED_BLK_LPOS \
{ \
@@ -259,7 +273,7 @@ static struct printk_ringbuffer name = { \
.infos = &_##name##_infos[0], \
.head_id = ATOMIC_INIT(DESC0_ID(descbits)), \
.tail_id = ATOMIC_INIT(DESC0_ID(descbits)), \
- .last_finalized_id = ATOMIC_INIT(DESC0_ID(descbits)), \
+ .last_finalized_seq = ATOMIC_INIT(0), \
}, \
.text_data_ring = { \
.size_bits = (avgtextbits) + (descbits), \
@@ -380,5 +394,6 @@ bool prb_read_valid_info(struct printk_ringbuffer *rb, u64 seq,
u64 prb_first_valid_seq(struct printk_ringbuffer *rb);
u64 prb_next_seq(struct printk_ringbuffer *rb);
+u64 prb_next_reserve_seq(struct printk_ringbuffer *rb);
#endif /* _KERNEL_PRINTK_RINGBUFFER_H */
@@ -583,7 +583,6 @@ static void rcu_check_gp_kthread_expired_fqs_timer(void)
static void print_other_cpu_stall(unsigned long gp_seq, unsigned long gps)
{
- enum nbcon_prio prev_prio;
int cpu;
unsigned long flags;
unsigned long gpa;
@@ -599,7 +598,7 @@ static void print_other_cpu_stall(unsigned long gp_seq, unsigned long gps)
if (rcu_stall_is_suppressed())
return;
- prev_prio = nbcon_atomic_enter(NBCON_PRIO_EMERGENCY);
+ nbcon_cpu_emergency_enter();
/*
* OK, time to rat on our buddy...
@@ -656,7 +655,7 @@ static void print_other_cpu_stall(unsigned long gp_seq, unsigned long gps)
rcu_force_quiescent_state(); /* Kick them all. */
- nbcon_atomic_exit(NBCON_PRIO_EMERGENCY, prev_prio);
+ nbcon_cpu_emergency_exit();
}
static void print_cpu_stall(unsigned long gps)
@@ -1 +1 @@
--rt12
+-rt13
Dear RT folks! I'm pleased to announce the v6.6-rt13 patch set. Changes since v6.6-rt12: - Update to the printk series provided by John Ogness. Some of the patches were merged during the merge window other are under review. Here is a small changelog: - warn and panic console output will interrupt the threaded printing mid-line rather than waiting for the line to finish printing - in panic, printing is now synchronous rather than first storing all panic messages and then dumping to consoles - printing kthreads will sleep, rather than busy-wait, while consoles are in emergency or panic states - atomic console printing will only print to the end of the emergency messages, rather than flushing all remaining records - apply various printk mainline fixes currently in review https://lore.kernel.org/lkml/20231106210730.115192-1-john.ogness@linutronix.de Known issues Pierre Gondois reported crashes on ARM64 together with "rtla timerlat hist" as trigger. It is not yet understood. The report is at https://lore.kernel.org/70c08728-3d4f-47a6-8a3e-114e4877d120@arm.com The delta patch against v6.6-rt12 is appended below and can be found here: https://cdn.kernel.org/pub/linux/kernel/projects/rt/6.6/incr/patch-6.6-rt12-rt13.patch.xz You can get this release via the git tree at: https://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git v6.6-rt13 The RT patch against v6.6 can be found here: https://cdn.kernel.org/pub/linux/kernel/projects/rt/6.6/older/patch-6.6-rt13.patch.xz The split quilt queue is available at: https://cdn.kernel.org/pub/linux/kernel/projects/rt/6.6/older/patches-6.6-rt13.tar.xz Sebastian