@@ -312,7 +312,7 @@ phy1: ethernet-phy@1 {
* Also do not touch the "ports" or "port@n" nodes. These are also ABI.
*/
switch0@10 {
- compatible = "marvell,mv88e6190";
+ compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
reg = <0x10>;
dsa,member = <0 0>;
interrupt-parent = <&moxtet>;
@@ -438,7 +438,7 @@ port-sfp@a {
/* NOTE: this node name is ABI, don't change it! */
switch0@2 {
- compatible = "marvell,mv88e6085";
+ compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
reg = <0x2>;
dsa,member = <0 0>;
interrupt-parent = <&moxtet>;
@@ -506,7 +506,7 @@ port@5 {
/* NOTE: this node name is ABI, don't change it! */
switch1@11 {
- compatible = "marvell,mv88e6190";
+ compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
reg = <0x11>;
dsa,member = <0 1>;
interrupt-parent = <&moxtet>;
@@ -632,7 +632,7 @@ port-sfp@a {
/* NOTE: this node name is ABI, don't change it! */
switch1@2 {
- compatible = "marvell,mv88e6085";
+ compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
reg = <0x2>;
dsa,member = <0 1>;
interrupt-parent = <&moxtet>;
@@ -700,7 +700,7 @@ port@5 {
/* NOTE: this node name is ABI, don't change it! */
switch2@12 {
- compatible = "marvell,mv88e6190";
+ compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
reg = <0x12>;
dsa,member = <0 2>;
interrupt-parent = <&moxtet>;
@@ -817,7 +817,7 @@ port-sfp@a {
/* NOTE: this node name is ABI, don't change it! */
switch2@2 {
- compatible = "marvell,mv88e6085";
+ compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
reg = <0x2>;
dsa,member = <0 2>;
interrupt-parent = <&moxtet>;
These special compatibles are added to the Marvell Armada 3720 Turris Mox in order to be able to special-case and avoid warnings on the non-standard nodenames that are ABI on this one board due to being used in deployed versions of U-Boot. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)