| Message ID | 20160822152131.15340-4-afd@ti.com |
|---|---|
| State | Superseded |
| Headers | show |
diff --git a/arch/arm/cpu/armv7/am33xx/config.mk b/arch/arm/cpu/armv7/am33xx/config.mk index 8e655d7..2f53df8 100644 --- a/arch/arm/cpu/armv7/am33xx/config.mk +++ b/arch/arm/cpu/armv7/am33xx/config.mk @@ -34,7 +34,7 @@ ifeq ($(CONFIG_TI_SECURE_DEVICE),y) # Refer to README.ti-secure for more info # ALL-y += u-boot-spl_HS_ISSW -ALL-$(CONFIG_SPL_SPI_SUPPORT) += u-boot-spl_HS_SPI_X-LOADER +ALL-$(CONFIG_SPL_SPI_BOOT) += u-boot-spl_HS_SPI_X-LOADER ALL-$(CONFIG_SPL_QSPI_BOOT) += u-boot-spl_HS_XIP_X-LOADER ALL-$(CONFIG_SPL_NOR_BOOT) += u-boot-spl_HS_XIP_X-LOADER ALL-$(CONFIG_SPL_NAND_BOOT) += u-boot-spl_HS_X-LOADER
Before the addition of SPL boot media type Kconfig options there was no way to determine what boot media the SPL would be booted from, so it was assumed that if the SPL could load U-Boot proper via SPI then the SPL itself would probably also be loaded from SPI. Use the new SPL_SPI_BOOT option to enable the generation an SPL image capable of being booted from SPI, and not have this depend on the SPL's media loading capabilities. Signed-off-by: Andrew F. Davis <afd@ti.com> --- arch/arm/cpu/armv7/am33xx/config.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -- 2.9.3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot