new file mode 100644
@@ -0,0 +1,442 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Cirrus Logic systems EP93XX SoC
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/cirrus,ep9301-syscon.h>
+/ {
+ soc: soc {
+ compatible = "simple-bus";
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ syscon: syscon@80930000 {
+ compatible = "cirrus,ep9301-syscon",
+ "syscon", "simple-mfd";
+ reg = <0x80930000 0x1000>;
+
+ #clock-cells = <1>;
+ clocks = <&xtali>;
+
+ spi_default_pins: pins-spi {
+ function = "spi";
+ groups = "ssp";
+ };
+
+ ac97_default_pins: pins-ac97 {
+ function = "ac97";
+ groups = "ac97";
+ };
+
+ i2s_on_ssp_pins: pins-i2sonssp {
+ function = "i2s";
+ groups = "i2s_on_ssp";
+ };
+
+ i2s_on_ac97_pins: pins-i2sonac97 {
+ function = "i2s";
+ groups = "i2s_on_ac97";
+ };
+
+ gpio1_default_pins: pins-gpio1 {
+ function = "gpio";
+ groups = "gpio1agrp";
+ };
+
+ pwm1_default_pins: pins-pwm1 {
+ function = "pwm";
+ groups = "pwm1";
+ };
+
+ gpio2_default_pins: pins-gpio2 {
+ function = "gpio";
+ groups = "gpio2agrp";
+ };
+
+ gpio3_default_pins: pins-gpio3 {
+ function = "gpio";
+ groups = "gpio3agrp";
+ };
+
+ keypad_default_pins: pins-keypad {
+ function = "keypad";
+ groups = "keypadgrp";
+ };
+
+ gpio4_default_pins: pins-gpio4 {
+ function = "gpio";
+ groups = "gpio4agrp";
+ };
+
+ gpio6_default_pins: pins-gpio6 {
+ function = "gpio";
+ groups = "gpio6agrp";
+ };
+
+ gpio7_default_pins: pins-gpio7 {
+ function = "gpio";
+ groups = "gpio7agrp";
+ };
+
+ ide_default_pins: pins-ide {
+ function = "pata";
+ groups = "idegrp";
+ };
+
+ lcd_on_dram0_pins: pins-rasteronsdram0 {
+ function = "lcd";
+ groups = "rasteronsdram0grp";
+ };
+
+ lcd_on_dram3_pins: pins-rasteronsdram3 {
+ function = "lcd";
+ groups = "rasteronsdram3grp";
+ };
+ };
+
+ adc: adc@80900000 {
+ compatible = "cirrus,ep9301-adc";
+ reg = <0x80900000 0x28>;
+ clocks = <&syscon EP93XX_CLK_ADC>;
+ interrupt-parent = <&vic0>;
+ interrupts = <30>;
+ status = "disabled";
+ };
+
+ /*
+ * The EP93XX expansion bus is a set of up to 7 each up to 16MB
+ * windows in the 256MB space from 0x50000000 to 0x5fffffff.
+ * But since we don't require to setup it in any way, we can
+ * represent it as a simple-bus.
+ */
+ ebi: bus@80080000 {
+ compatible = "simple-bus";
+ reg = <0x80080000 0x20>;
+ native-endian;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ };
+
+ dma0: dma-controller@80000000 {
+ compatible = "cirrus,ep9301-dma-m2p";
+ reg = <0x80000000 0x0040>,
+ <0x80000040 0x0040>,
+ <0x80000080 0x0040>,
+ <0x800000c0 0x0040>,
+ <0x80000240 0x0040>,
+ <0x80000200 0x0040>,
+ <0x800002c0 0x0040>,
+ <0x80000280 0x0040>,
+ <0x80000340 0x0040>,
+ <0x80000300 0x0040>;
+ clocks = <&syscon EP93XX_CLK_M2P0>,
+ <&syscon EP93XX_CLK_M2P1>,
+ <&syscon EP93XX_CLK_M2P2>,
+ <&syscon EP93XX_CLK_M2P3>,
+ <&syscon EP93XX_CLK_M2P4>,
+ <&syscon EP93XX_CLK_M2P5>,
+ <&syscon EP93XX_CLK_M2P6>,
+ <&syscon EP93XX_CLK_M2P7>,
+ <&syscon EP93XX_CLK_M2P8>,
+ <&syscon EP93XX_CLK_M2P9>;
+ clock-names = "m2p0", "m2p1",
+ "m2p2", "m2p3",
+ "m2p4", "m2p5",
+ "m2p6", "m2p7",
+ "m2p8", "m2p9";
+ interrupt-parent = <&vic0>;
+ interrupts = <7>, <8>, <9>, <10>, <11>,
+ <12>, <13>, <14>, <15>, <16>;
+ #dma-cells = <2>;
+ };
+
+ dma1: dma-controller@80000100 {
+ compatible = "cirrus,ep9301-dma-m2m";
+ reg = <0x80000100 0x0040>,
+ <0x80000140 0x0040>;
+ clocks = <&syscon EP93XX_CLK_M2M0>,
+ <&syscon EP93XX_CLK_M2M1>;
+ clock-names = "m2m0", "m2m1";
+ interrupt-parent = <&vic0>;
+ interrupts = <17>, <18>;
+ #dma-cells = <2>;
+ };
+
+ eth0: ethernet@80010000 {
+ compatible = "cirrus,ep9301-eth";
+ reg = <0x80010000 0x10000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <7>;
+ mdio0: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ gpio0: gpio@80840000 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840000 0x04>,
+ <0x80840010 0x04>,
+ <0x80840090 0x1c>;
+ reg-names = "data", "dir", "intr";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&vic1>;
+ interrupts = <27>;
+ };
+
+ gpio1: gpio@80840004 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840004 0x04>,
+ <0x80840014 0x04>,
+ <0x808400ac 0x1c>;
+ reg-names = "data", "dir", "intr";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ interrupt-parent = <&vic1>;
+ interrupts = <27>;
+ };
+
+ gpio2: gpio@80840008 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840008 0x04>,
+ <0x80840018 0x04>;
+ reg-names = "data", "dir";
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio2_default_pins>;
+ };
+
+ gpio3: gpio@8084000c {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x8084000c 0x04>,
+ <0x8084001c 0x04>;
+ reg-names = "data", "dir";
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio3_default_pins>;
+ };
+
+ gpio4: gpio@80840020 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840020 0x04>,
+ <0x80840024 0x04>;
+ reg-names = "data", "dir";
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio4_default_pins>;
+ };
+
+ gpio5: gpio@80840030 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840030 0x04>,
+ <0x80840034 0x04>,
+ <0x8084004c 0x1c>;
+ reg-names = "data", "dir", "intr";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ interrupts-extended = <&vic0 19>, <&vic0 20>,
+ <&vic0 21>, <&vic0 22>,
+ <&vic1 15>, <&vic1 16>,
+ <&vic1 17>, <&vic1 18>;
+ };
+
+ gpio6: gpio@80840038 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840038 0x04>,
+ <0x8084003c 0x04>;
+ reg-names = "data", "dir";
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio6_default_pins>;
+ };
+
+ gpio7: gpio@80840040 {
+ compatible = "cirrus,ep9301-gpio";
+ reg = <0x80840040 0x04>,
+ <0x80840044 0x04>;
+ reg-names = "data", "dir";
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio7_default_pins>;
+ };
+
+ i2s: i2s@80820000 {
+ compatible = "cirrus,ep9301-i2s";
+ reg = <0x80820000 0x100>;
+ #sound-dai-cells = <0>;
+ interrupt-parent = <&vic1>;
+ interrupts = <28>;
+ clocks = <&syscon EP93XX_CLK_I2S_MCLK>,
+ <&syscon EP93XX_CLK_I2S_SCLK>,
+ <&syscon EP93XX_CLK_I2S_LRCLK>;
+ clock-names = "mclk", "sclk", "lrclk";
+ dmas = <&dma0 0 1>, <&dma0 0 2>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ ide: ide@800a0000 {
+ compatible = "cirrus,ep9312-pata";
+ reg = <0x800a0000 0x38>;
+ interrupt-parent = <&vic1>;
+ interrupts = <8>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ide_default_pins>;
+ status = "disabled";
+ };
+
+ vic0: interrupt-controller@800b0000 {
+ compatible = "arm,pl192-vic";
+ reg = <0x800b0000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ valid-mask = <0x7ffffffc>;
+ valid-wakeup-mask = <0x0>;
+ };
+
+ vic1: interrupt-controller@800c0000 {
+ compatible = "arm,pl192-vic";
+ reg = <0x800c0000 0x1000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ valid-mask = <0x1fffffff>;
+ valid-wakeup-mask = <0x0>;
+ };
+
+ keypad: keypad@800f0000 {
+ compatible = "cirrus,ep9307-keypad";
+ reg = <0x800f0000 0x0c>;
+ interrupt-parent = <&vic0>;
+ interrupts = <29>;
+ clocks = <&syscon EP93XX_CLK_KEYPAD>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&keypad_default_pins>;
+ linux,keymap = <KEY_UP>,
+ <KEY_DOWN>,
+ <KEY_VOLUMEDOWN>,
+ <KEY_HOME>,
+ <KEY_RIGHT>,
+ <KEY_LEFT>,
+ <KEY_ENTER>,
+ <KEY_VOLUMEUP>,
+ <KEY_F6>,
+ <KEY_F8>,
+ <KEY_F9>,
+ <KEY_F10>,
+ <KEY_F1>,
+ <KEY_F2>,
+ <KEY_F3>,
+ <KEY_POWER>;
+ };
+
+ pwm0: pwm@80910000 {
+ compatible = "cirrus,ep9301-pwm";
+ reg = <0x80910000 0x10>;
+ clocks = <&syscon EP93XX_CLK_PWM>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@80910020 {
+ compatible = "cirrus,ep9301-pwm";
+ reg = <0x80910020 0x10>;
+ clocks = <&syscon EP93XX_CLK_PWM>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_default_pins>;
+ status = "disabled";
+ };
+
+ rtc0: rtc@80920000 {
+ compatible = "cirrus,ep9301-rtc";
+ reg = <0x80920000 0x100>;
+ };
+
+ spi0: spi@808a0000 {
+ compatible = "cirrus,ep9301-spi";
+ reg = <0x808a0000 0x18>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&vic1>;
+ interrupts = <21>;
+ clocks = <&syscon EP93XX_CLK_SPI>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_default_pins>;
+ status = "disabled";
+ };
+
+ timer: timer@80810000 {
+ compatible = "cirrus,ep9301-timer";
+ reg = <0x80810000 0x100>;
+ interrupt-parent = <&vic1>;
+ interrupts = <19>;
+ };
+
+ uart0: serial@808c0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x808c0000 0x1000>;
+ arm,primecell-periphid = <0x00041010>;
+ clocks = <&syscon EP93XX_CLK_UART1>, <&syscon EP93XX_CLK_UART>;
+ clock-names = "uartclk", "apb_pclk";
+ interrupt-parent = <&vic1>;
+ interrupts = <20>;
+ status = "disabled";
+ };
+
+ uart1: uart@808d0000 {
+ compatible = "arm,primecell";
+ reg = <0x808d0000 0x1000>;
+ arm,primecell-periphid = <0x00041010>;
+ clocks = <&syscon EP93XX_CLK_UART2>, <&syscon EP93XX_CLK_UART>;
+ clock-names = "apb:uart2", "apb_pclk";
+ interrupt-parent = <&vic1>;
+ interrupts = <22>;
+ status = "disabled";
+ };
+
+ uart2: uart@808b0000 {
+ compatible = "arm,primecell";
+ reg = <0x808b0000 0x1000>;
+ arm,primecell-periphid = <0x00041010>;
+ clocks = <&syscon EP93XX_CLK_UART3>, <&syscon EP93XX_CLK_UART>;
+ clock-names = "apb:uart3", "apb_pclk";
+ interrupt-parent = <&vic1>;
+ interrupts = <23>;
+ status = "disabled";
+ };
+
+ usb0: usb@80020000 {
+ compatible = "generic-ohci";
+ reg = <0x80020000 0x10000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <24>;
+ clocks = <&syscon EP93XX_CLK_USB>;
+ status = "disabled";
+ };
+
+ watchdog0: watchdog@80940000 {
+ compatible = "cirrus,ep9301-wdt";
+ reg = <0x80940000 0x08>;
+ };
+ };
+
+ xtali: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <14745600>;
+ clock-output-names = "xtali";
+ };
+};