| Message ID | 1700702093-8008-1-git-send-email-shengjiu.wang@nxp.com |
|---|---|
| State | Accepted |
| Commit | 347ecf29a68cc8958fbcbd26ef410d07fe9d82f4 |
| Headers | show |
| Series | ASoC: fsl_xcvr: refine the requested phy clock frequency | expand |
On Thu, 23 Nov 2023 09:14:53 +0800, Shengjiu Wang wrote: > As the input phy clock frequency will divided by 2 by default > on i.MX8MP with the implementation of clk-imx8mp-audiomix driver, > So the requested frequency need to be updated. > > The relation of phy clock is: > sai_pll_ref_sel > sai_pll > sai_pll_bypass > sai_pll_out > sai_pll_out_div2 > earc_phy_cg > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next Thanks! [1/1] ASoC: fsl_xcvr: refine the requested phy clock frequency commit: 347ecf29a68cc8958fbcbd26ef410d07fe9d82f4 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c index 77f8e2394bf9..f0fb33d719c2 100644 --- a/sound/soc/fsl/fsl_xcvr.c +++ b/sound/soc/fsl/fsl_xcvr.c @@ -358,7 +358,7 @@ static int fsl_xcvr_en_aud_pll(struct fsl_xcvr *xcvr, u32 freq) struct device *dev = &xcvr->pdev->dev; int ret; - freq = xcvr->soc_data->spdif_only ? freq / 10 : freq; + freq = xcvr->soc_data->spdif_only ? freq / 5 : freq; clk_disable_unprepare(xcvr->phy_clk); ret = clk_set_rate(xcvr->phy_clk, freq); if (ret < 0) { @@ -409,7 +409,7 @@ static int fsl_xcvr_prepare(struct snd_pcm_substream *substream, bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; u32 m_ctl = 0, v_ctl = 0; u32 r = substream->runtime->rate, ch = substream->runtime->channels; - u32 fout = 32 * r * ch * 10 * 2; + u32 fout = 32 * r * ch * 10; int ret = 0; switch (xcvr->mode) {
As the input phy clock frequency will divided by 2 by default on i.MX8MP with the implementation of clk-imx8mp-audiomix driver, So the requested frequency need to be updated. The relation of phy clock is: sai_pll_ref_sel sai_pll sai_pll_bypass sai_pll_out sai_pll_out_div2 earc_phy_cg Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> --- sound/soc/fsl/fsl_xcvr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)