@@ -283,8 +283,8 @@ Description:
device will never be put into D3Cold state. If it is set, the
device may be put into D3Cold state if other requirements are
satisfied too. Reading this attribute will show the current
- value of d3cold_allowed bit. Writing this attribute will set
- the value of d3cold_allowed bit.
+ value of no_d3cold bit.
+ Writing to this attribute is deprecated and will do nothing.
What: /sys/bus/pci/devices/.../sriov_totalvfs
Date: November 2012
@@ -911,7 +911,7 @@ pci_power_t acpi_pci_choose_state(struct pci_dev *pdev)
{
int acpi_state, d_max;
- if (pdev->no_d3cold || !pdev->d3cold_allowed)
+ if (pdev->no_d3cold)
d_max = ACPI_STATE_D3_HOT;
else
d_max = ACPI_STATE_D3_COLD;
@@ -522,17 +522,7 @@ static ssize_t d3cold_allowed_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct pci_dev *pdev = to_pci_dev(dev);
- unsigned long val;
-
- if (kstrtoul(buf, 0, &val) < 0)
- return -EINVAL;
-
- pdev->d3cold_allowed = !!val;
- pci_bridge_d3_update(pdev);
-
- pm_runtime_resume(dev);
-
+ dev_warn_once(dev, "pci: writing to d3cold_allowed is deprecated\n");
return count;
}
@@ -540,7 +530,7 @@ static ssize_t d3cold_allowed_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct pci_dev *pdev = to_pci_dev(dev);
- return sysfs_emit(buf, "%u\n", pdev->d3cold_allowed);
+ return sysfs_emit(buf, "%u\n", !pdev->no_d3cold);
}
static DEVICE_ATTR_RW(d3cold_allowed);
#endif
@@ -3069,7 +3069,7 @@ static int pci_dev_check_d3cold(struct pci_dev *dev, void *data)
bool *d3cold_ok = data;
if (/* The device needs to be allowed to go D3cold ... */
- dev->no_d3cold || !dev->d3cold_allowed ||
+ dev->no_d3cold ||
/* ... and if it is wakeup capable to do so from D3cold. */
(device_may_wakeup(&dev->dev) &&
@@ -3206,7 +3206,6 @@ void pci_pm_init(struct pci_dev *dev)
dev->d3hot_delay = PCI_PM_D3HOT_WAIT;
dev->d3cold_delay = PCI_PM_D3COLD_WAIT;
dev->bridge_d3 = pci_bridge_d3_possible(dev);
- dev->d3cold_allowed = true;
dev->d1_support = false;
dev->d2_support = false;
@@ -376,7 +376,6 @@ struct pci_dev {
unsigned int no_d1d2:1; /* D1 and D2 are forbidden */
unsigned int no_d3cold:1; /* D3cold is forbidden */
unsigned int bridge_d3:1; /* Allow D3 for bridge */
- unsigned int d3cold_allowed:1; /* D3cold is allowed by user */
unsigned int mmio_always_on:1; /* Disallow turning off io/mem
decoding during BAR sizing */
unsigned int wakeup_prepared:1;
Before kernel 3.6 D3cold was considered "opt-in" for PCIe devices. Userspace was able to opt PCIe devices into d3cold support by using the `d3cold_allowed` sysfs attribute. The policy changed to default to enabled with commit 4f9c1397e2e8 ("PCI/PM: Enable D3/D3cold by default for most devices"). The sysfs file remains however and can potentially allow userspace to prevent the SoC from getting into the deepest sleep state on modern systems. For debugging purposes `pcie_port_pm=` can be used to control whether a PCI port will go into D3cold and runtime PM can be turned off by `/sys/bus/pci/devices/*/power/control` on PCI end points. Change the sysfs attribute to a noop that ignores the input when written and shows a warning. Simplify the internal kernel logic to drop `d3cold_allowed`. Link: https://lore.kernel.org/linux-pci/20230918132424.GA11357@wunner.de/ Acked-by: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> --- Documentation/ABI/testing/sysfs-bus-pci | 4 ++-- drivers/pci/pci-acpi.c | 2 +- drivers/pci/pci-sysfs.c | 14 ++------------ drivers/pci/pci.c | 3 +-- include/linux/pci.h | 1 - 5 files changed, 6 insertions(+), 18 deletions(-)