[2/2] ARM: dts: am57xx-beagle-x15: Add support for rev B1

Message ID	20160902090600.27262-3-nm@ti.com
State	New
Headers	show Delivered-To: patch@linaro.org Received-SPF: pass (google.com: best guess record for domain of devicetree-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; From: Nishanth Menon <nm@ti.com> To: Tony Lindgren <tony@atomide.com> CC: Tomi Valkeinen <tomi.valkeinen@ti.com>, Kishon Vijay Abraham I <kishon@ti.com>, <linux-omap@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, Nishanth Menon <nm@ti.com> Subject: [PATCH 2/2] ARM: dts: am57xx-beagle-x15: Add support for rev B1 Date: Fri, 2 Sep 2016 04:06:00 -0500 Message-ID: <20160902090600.27262-3-nm@ti.com> In-Reply-To: <20160902090600.27262-1-nm@ti.com> References: <20160902090600.27262-1-nm@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: devicetree-owner@vger.kernel.org Precedence: bulk

diff for x15.dts might look a little weird. we could alternatively split the patch into two by creating a common dtsi and then introducing revb1 -> but, at least for the moment, I felt it to be an overkill. Also, please note that even though revb1 is the production platform, there are sufficient quantities of x15 A2s (pre-prod) in the wild currently to leave existing dts in sync with A2 and introduce b1 as a seperate dts (instead of the other way around). arch/arm/boot/dts/Makefile | 1 + ...eagle-x15.dts => am57xx-beagle-x15-common.dtsi} | 8 +- arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts | 24 + arch/arm/boot/dts/am57xx-beagle-x15.dts | 592 +-------------------- 4 files changed, 33 insertions(+), 592 deletions(-) copy arch/arm/boot/dts/{am57xx-beagle-x15.dts => am57xx-beagle-x15-common.dtsi} (97%) create mode 100644 arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index faacd52370d2..b8d9840895c2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -570,6 +570,7 @@ dtb-$(CONFIG_SOC_OMAP5) += \ omap5-uevm.dtb dtb-$(CONFIG_SOC_DRA7XX) += \ am57xx-beagle-x15.dtb \ + am57xx-beagle-x15-revb1.dtb \ am57xx-cl-som-am57x.dtb \ am57xx-sbc-am57x.dtb \ am572x-idk.dtb \ diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi similarity index 97% copy from arch/arm/boot/dts/am57xx-beagle-x15.dts copy to arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index ef21da558ea3..ec85ff9004e8 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -1,5 +1,5 @@ /* - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -13,7 +13,6 @@ #include <dt-bindings/interrupt-controller/irq.h> / { - model = "TI AM5728 BeagleBoard-X15"; compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; aliases { @@ -114,10 +113,6 @@ tpd12s015: encoder { compatible = "ti,tpd12s015"; - gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ - <&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */ - <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ - ports { #address-cells = <1>; #size-cells = <0>; @@ -448,7 +443,6 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins_default>; - vmmc-supply = <&ldo1_reg>; bus-width = <4>; cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts new file mode 100644 index 000000000000..da61dbba7768 --- /dev/null +++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "am57xx-beagle-x15-common.dtsi" + +/ { + model = "TI AM5728 BeagleBoard-X15 rev B1"; +}; + +&tpd12s015 { + gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ + <&gpio2 30 GPIO_ACTIVE_HIGH>, /* gpio6_30, LS OE */ + <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ +}; + +&mmc1 { + vmmc-supply = <&vdd_3v3>; + vmmc-aux-supply = <&ldo1_reg>; +}; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index ef21da558ea3..b47ac4bbfde6 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -1,602 +1,24 @@ /* - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -/dts-v1/; -#include "dra74x.dtsi" -#include "am57xx-commercial-grade.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> +#include "am57xx-beagle-x15-common.dtsi" / { model = "TI AM5728 BeagleBoard-X15"; - compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; - - aliases { - rtc0 = &mcp_rtc; - rtc1 = &tps659038_rtc; - rtc2 = &rtc; - display0 = &hdmi0; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x80000000 0x0 0x80000000>; - }; - - vdd_3v3: fixedregulator-vdd_3v3 { - compatible = "regulator-fixed"; - regulator-name = "vdd_3v3"; - vin-supply = <&regen1>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - aic_dvdd: fixedregulator-aic_dvdd { - compatible = "regulator-fixed"; - regulator-name = "aic_dvdd_fixed"; - vin-supply = <&vdd_3v3>; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vtt_fixed: fixedregulator-vtt { - /* TPS51200 */ - compatible = "regulator-fixed"; - regulator-name = "vtt_fixed"; - vin-supply = <&smps3_reg>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; - }; - - leds { - compatible = "gpio-leds"; - - led0 { - label = "beagle-x15:usr0"; - gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - - led1 { - label = "beagle-x15:usr1"; - gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "cpu0"; - default-state = "off"; - }; - - led2 { - label = "beagle-x15:usr2"; - gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc0"; - default-state = "off"; - }; - - led3 { - label = "beagle-x15:usr3"; - gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "disk-activity"; - default-state = "off"; - }; - }; - - gpio_fan: gpio_fan { - /* Based on 5v 500mA AFB02505HHB */ - compatible = "gpio-fan"; - gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = <0 0>, - <13000 1>; - #cooling-cells = <2>; - }; - - hdmi0: connector { - compatible = "hdmi-connector"; - label = "hdmi"; - - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&tpd12s015_out>; - }; - }; - }; - - tpd12s015: encoder { - compatible = "ti,tpd12s015"; - - gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ - <&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */ - <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tpd12s015_in: endpoint { - remote-endpoint = <&hdmi_out>; - }; - }; - - port@1 { - reg = <1>; - - tpd12s015_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - }; - }; - - sound0: sound0 { - compatible = "simple-audio-card"; - simple-audio-card,name = "BeagleBoard-X15"; - simple-audio-card,widgets = - "Line", "Line Out", - "Line", "Line In"; - simple-audio-card,routing = - "Line Out", "LLOUT", - "Line Out", "RLOUT", - "MIC2L", "Line In", - "MIC2R", "Line In"; - simple-audio-card,format = "dsp_b"; - simple-audio-card,bitclock-master = <&sound0_master>; - simple-audio-card,frame-master = <&sound0_master>; - simple-audio-card,bitclock-inversion; - - simple-audio-card,cpu { - sound-dai = <&mcasp3>; - }; - - sound0_master: simple-audio-card,codec { - sound-dai = <&tlv320aic3104>; - clocks = <&clkout2_clk>; - }; - }; -}; - -&dra7_pmx_core { - mmc1_pins_default: mmc1_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ - DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ - DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ - DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ - DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ - DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ - DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ - >; - }; - - mmc2_pins_default: mmc2_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ - DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ - DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ - DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ - DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ - DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ - DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ - DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ - DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ - DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ - >; - }; -}; -&i2c1 { - status = "okay"; - clock-frequency = <400000>; - - tps659038: tps659038@58 { - compatible = "ti,tps659038"; - reg = <0x58>; - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - #interrupt-cells = <2>; - interrupt-controller; - - ti,system-power-controller; - - tps659038_pmic { - compatible = "ti,tps659038-pmic"; - - regulators { - smps12_reg: smps12 { - /* VDD_MPU */ - regulator-name = "smps12"; - regulator-min-microvolt = < 850000>; - regulator-max-microvolt = <1250000>; - regulator-always-on; - regulator-boot-on; - }; - - smps3_reg: smps3 { - /* VDD_DDR */ - regulator-name = "smps3"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - smps45_reg: smps45 { - /* VDD_DSPEVE, VDD_IVA, VDD_GPU */ - regulator-name = "smps45"; - regulator-min-microvolt = < 850000>; - regulator-max-microvolt = <1250000>; - regulator-always-on; - regulator-boot-on; - }; - - smps6_reg: smps6 { - /* VDD_CORE */ - regulator-name = "smps6"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1150000>; - regulator-always-on; - regulator-boot-on; - }; - - /* SMPS7 unused */ - - smps8_reg: smps8 { - /* VDD_1V8 */ - regulator-name = "smps8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - /* SMPS9 unused */ - - ldo1_reg: ldo1 { - /* VDD_SD / VDDSHV8 */ - regulator-name = "ldo1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: ldo2 { - /* VDD_SHV5 */ - regulator-name = "ldo2"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo3_reg: ldo3 { - /* VDDA_1V8_PHYA */ - regulator-name = "ldo3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo4_reg: ldo4 { - /* VDDA_1V8_PHYB */ - regulator-name = "ldo4"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo9_reg: ldo9 { - /* VDD_RTC */ - regulator-name = "ldo9"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - regulator-always-on; - regulator-boot-on; - }; - - ldoln_reg: ldoln { - /* VDDA_1V8_PLL */ - regulator-name = "ldoln"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldousb_reg: ldousb { - /* VDDA_3V_USB: VDDA_USBHS33 */ - regulator-name = "ldousb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - - regen1: regen1 { - /* VDD_3V3_ON */ - regulator-name = "regen1"; - regulator-boot-on; - regulator-always-on; - }; - }; - }; - - tps659038_rtc: tps659038_rtc { - compatible = "ti,palmas-rtc"; - interrupt-parent = <&tps659038>; - interrupts = <8 IRQ_TYPE_EDGE_FALLING>; - wakeup-source; - }; - - tps659038_pwr_button: tps659038_pwr_button { - compatible = "ti,palmas-pwrbutton"; - interrupt-parent = <&tps659038>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - wakeup-source; - ti,palmas-long-press-seconds = <12>; - }; - - tps659038_gpio: tps659038_gpio { - compatible = "ti,palmas-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - - extcon_usb2: tps659038_usb { - compatible = "ti,palmas-usb-vid"; - ti,enable-vbus-detection; - vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; - }; - - }; - - tmp102: tmp102@48 { - compatible = "ti,tmp102"; - reg = <0x48>; - interrupt-parent = <&gpio7>; - interrupts = <16 IRQ_TYPE_LEVEL_LOW>; - #thermal-sensor-cells = <1>; - }; - - tlv320aic3104: tlv320aic3104@18 { - #sound-dai-cells = <0>; - compatible = "ti,tlv320aic3104"; - reg = <0x18>; - assigned-clocks = <&clkoutmux2_clk_mux>; - assigned-clock-parents = <&sys_clk2_dclk_div>; - - status = "okay"; - adc-settle-ms = <40>; - - AVDD-supply = <&vdd_3v3>; - IOVDD-supply = <&vdd_3v3>; - DRVDD-supply = <&vdd_3v3>; - DVDD-supply = <&aic_dvdd>; - }; - - eeprom: eeprom@50 { - compatible = "at,24c32"; - reg = <0x50>; - }; }; -&i2c3 { - status = "okay"; - clock-frequency = <400000>; - - mcp_rtc: rtc@6f { - compatible = "microchip,mcp7941x"; - reg = <0x6f>; - interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>, - <&dra7_pmx_core 0x424>; - interrupt-names = "irq", "wakeup"; - - vcc-supply = <&vdd_3v3>; - wakeup-source; - }; -}; - -&gpio7 { - ti,no-reset-on-init; - ti,no-idle-on-init; -}; - -&cpu0 { - cpu0-supply = <&smps12_reg>; - voltage-tolerance = <1>; -}; - -&uart3 { - status = "okay"; - interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, - <&dra7_pmx_core 0x3f8>; -}; - -&mac { - status = "okay"; - dual_emac; -}; - -&cpsw_emac0 { - phy_id = <&davinci_mdio>, <1>; - phy-mode = "rgmii"; - dual_emac_res_vlan = <1>; -}; - -&cpsw_emac1 { - phy_id = <&davinci_mdio>, <2>; - phy-mode = "rgmii"; - dual_emac_res_vlan = <2>; +&tpd12s015 { + gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ + <&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */ + <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ }; &mmc1 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_default>; - - vmmc-supply = <&ldo1_reg>; - bus-width = <4>; - cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ -}; - -&mmc2 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_default>; - vmmc-supply = <&vdd_3v3>; - bus-width = <8>; - ti,non-removable; - cap-mmc-dual-data-rate; -}; - -&sata { - status = "okay"; -}; - -&usb2_phy1 { - phy-supply = <&ldousb_reg>; -}; - -&usb2_phy2 { - phy-supply = <&ldousb_reg>; -}; - -&usb1 { - dr_mode = "host"; -}; - -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - -&usb2 { - /* - * Stand alone usage is peripheral only. - * However, with some resistor modifications - * this port can be used via expansion connectors - * as "host" or "dual-role". If so, provide - * the necessary dr_mode override in the expansion - * board's DT. - */ - dr_mode = "peripheral"; -}; - -&cpu_trips { - cpu_alert1: cpu_alert1 { - temperature = <50000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "active"; - }; -}; - -&cpu_cooling_maps { - map1 { - trip = <&cpu_alert1>; - cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; -}; - -&thermal_zones { - board_thermal: board_thermal { - polling-delay-passive = <1250>; /* milliseconds */ - polling-delay = <1500>; /* milliseconds */ - - /* sensor ID */ - thermal-sensors = <&tmp102 0>; - - board_trips: trips { - board_alert0: board_alert { - temperature = <40000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "active"; - }; - - board_crit: board_crit { - temperature = <105000>; /* millicelsius */ - hysteresis = <0>; /* millicelsius */ - type = "critical"; - }; - }; - - board_cooling_maps: cooling-maps { - map0 { - trip = <&board_alert0>; - cooling-device = - <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; -}; - -&dss { - status = "ok"; - - vdda_video-supply = <&ldoln_reg>; -}; - -&hdmi { - status = "ok"; - vdda-supply = <&ldo4_reg>; - - port { - hdmi_out: endpoint { - remote-endpoint = <&tpd12s015_in>; - }; - }; -}; - -&pcie1 { - gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; -}; - -&mcasp3 { - #sound-dai-cells = <0>; - assigned-clocks = <&mcasp3_ahclkx_mux>; - assigned-clock-parents = <&sys_clkin2>; - status = "okay"; - - op-mode = <0>; /* MCASP_IIS_MODE */ - tdm-slots = <2>; - /* 4 serializers */ - serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ - 1 2 0 0 - >; - tx-num-evt = <32>; - rx-num-evt = <32>; -}; - -&mailbox5 { - status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { - status = "okay"; - }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { - status = "okay"; - }; -}; - -&mailbox6 { - status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { - status = "okay"; - }; - mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { - status = "okay"; - }; + vmmc-aux-supply = <&ldo1_reg>; };

[2/2] ARM: dts: am57xx-beagle-x15: Add support for rev B1

Commit Message

Comments

Patch