| Message ID | 20231218085456.3962720-3-xu.yang_2@nxp.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2,1/5] arm64: dts: imx8ulp: add usb nodes | expand |
On 18/12/2023 09:54, Xu Yang wrote: > The i.MX93 needs a wakup clock to work properly. This will add compatible > and restriction for i.MX93 platform. > > Signed-off-by: Xu Yang <xu.yang_2@nxp.com> > > --- > Changes in v2: > - no changes No changes? Where is the v1 in such case? > --- > .../devicetree/bindings/usb/ci-hdrc-usb2.yaml | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml > index b7e664f7395b..4e22b369e43f 100644 > --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml > +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml > @@ -57,6 +57,7 @@ properties: > - enum: > - fsl,imx8mm-usb > - fsl,imx8mn-usb > + - fsl,imx93-usb > - const: fsl,imx7d-usb > - const: fsl,imx27-usb > - items: > @@ -411,6 +412,17 @@ allOf: > external-vbus-divider: false > samsung,picophy-pre-emp-curr-control: false > samsung,picophy-dc-vol-level-adjust: false Blank line > + - if: > + properties: > + compatible: > + contains: > + const: fsl,imx93-usb > + then: > + properties: > + clock-names: > + items: > + - const: usb_ctrl_root_clk > + - const: usb_wakeup_clk What about all the reset? reg, interrupts? Maybe it is time to split the schema into common part and device-specific. Best regards, Krzysztof
Hi Krzysztof, > > On 20/12/2023 03:23, Xu Yang wrote: > >>> + - if: > >>> + properties: > >>> + compatible: > >>> + contains: > >>> + const: fsl,imx93-usb > >>> + then: > >>> + properties: > >>> + clock-names: > >>> + items: > >>> + - const: usb_ctrl_root_clk > >>> + - const: usb_wakeup_clk > >> > >> What about all the reset? reg, interrupts? Maybe it is time to split the > >> schema into common part and device-specific. > > > > Why I need to consider reset, reg and interrupts? Should I add restrictions on > > these too? I may not really understand your meaning. > > I looked at the binding and it seems that you allow different number of > items for them. Why aren't these constrained for your device? Well, understood now. I should add number of clocks and clock-names for my case. However, reset, reg and interrupts property is not special for imx93. Thanks, Xu Yang > > Best regards, > Krzysztof
diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml index b7e664f7395b..4e22b369e43f 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml @@ -57,6 +57,7 @@ properties: - enum: - fsl,imx8mm-usb - fsl,imx8mn-usb + - fsl,imx93-usb - const: fsl,imx7d-usb - const: fsl,imx27-usb - items: @@ -411,6 +412,17 @@ allOf: external-vbus-divider: false samsung,picophy-pre-emp-curr-control: false samsung,picophy-dc-vol-level-adjust: false + - if: + properties: + compatible: + contains: + const: fsl,imx93-usb + then: + properties: + clock-names: + items: + - const: usb_ctrl_root_clk + - const: usb_wakeup_clk unevaluatedProperties: false
The i.MX93 needs a wakup clock to work properly. This will add compatible and restriction for i.MX93 platform. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> --- Changes in v2: - no changes --- .../devicetree/bindings/usb/ci-hdrc-usb2.yaml | 12 ++++++++++++ 1 file changed, 12 insertions(+)