@@ -8,6 +8,7 @@
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <dt-bindings/clock/qcom,sm6115-gpucc.h>
@@ -443,10 +444,21 @@ MODULE_DEVICE_TABLE(of, gpu_cc_sm6115_match_table);
static int gpu_cc_sm6115_probe(struct platform_device *pdev)
{
struct regmap *regmap;
+ int ret;
+
+ ret = devm_pm_runtime_enable(&pdev->dev);
+ if (ret)
+ return ret;
+
+ ret = pm_runtime_resume_and_get(&pdev->dev);
+ if (ret)
+ return ret;
regmap = qcom_cc_map(pdev, &gpu_cc_sm6115_desc);
- if (IS_ERR(regmap))
+ if (IS_ERR(regmap)) {
+ pm_runtime_put(&pdev->dev);
return PTR_ERR(regmap);
+ }
clk_alpha_pll_configure(&gpu_cc_pll0, regmap, &gpu_cc_pll0_config);
clk_alpha_pll_configure(&gpu_cc_pll1, regmap, &gpu_cc_pll1_config);
@@ -461,7 +473,10 @@ static int gpu_cc_sm6115_probe(struct platform_device *pdev)
qcom_branch_set_clk_en(regmap, 0x1078); /* GPU_CC_AHB_CLK */
qcom_branch_set_clk_en(regmap, 0x1060); /* GPU_CC_GX_CXO_CLK */
- return qcom_cc_really_probe(pdev, &gpu_cc_sm6115_desc, regmap);
+ ret = qcom_cc_really_probe(pdev, &gpu_cc_sm6115_desc, regmap);
+ pm_runtime_put(&pdev->dev);
+
+ return ret;
}
static struct platform_driver gpu_cc_sm6115_driver = {
The GPU_CC block on SM6115 is powered by the VDD_CX rail. We need to ensure that CX is enabled to prevent unwanted power collapse and that the reference is dropped when unused so that the system can enter a firmware-managed lower power state. Enable runtime PM to keep the power flowing only when necessary. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- drivers/clk/qcom/gpucc-sm6115.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-)