arm64: dts: imx93-var-som: Add Variscite VAR-SOM-MX93

Message ID	20231223142939.23735-1-othacehe@gnu.org
State	Accepted
Commit	4ce623d9f1bff7164058ea2aca987e808d0660eb
Headers	show Received: from eggs.gnu.org (eggs.gnu.org [209.51.188.92]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 929F9DDDC; Sat, 23 Dec 2023 14:30:58 +0000 (UTC) From: Mathieu Othacehe <othacehe@gnu.org> To: Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org> Cc: Mathieu Othacehe <othacehe@gnu.org>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH] arm64: dts: imx93-var-som: Add Variscite VAR-SOM-MX93 Date: Sat, 23 Dec 2023 15:29:37 +0100 Message-ID: <20231223142939.23735-1-othacehe@gnu.org> Precedence: bulk MIME-Version: 1.0 Content-Transfer-Encoding: 8bit
Series	arm64: dts: imx93-var-som: Add Variscite VAR-SOM-MX93 \| expand arm64: dts: imx93-var-som: Add Variscite VAR-SOM-MX93

On 23/12/2023 15:29, Mathieu Othacehe wrote: > Add DTSI for Variscite VAR-SOM-MX93 System on Module and DTS for Variscite > VAR-SOM-MX93 on Symphony evaluation board. > > This version comes with: > - NXP i.MX 93 Dual, 1.7GHz, Cortex-A55 + Cortex-M33 > - 2 GB of RAM > - 16GB eMMC > - 802.11ax/ac/a/b/g/n WiFi with 5.3 Bluetooth > - CAN bus > - Audio codec > > Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> > --- > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../dts/freescale/imx93-var-som-symphony.dts | 307 +++++++++++++++++ > .../boot/dts/freescale/imx93-var-som.dtsi | 312 ++++++++++++++++++ > 3 files changed, 620 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts > create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-som.dtsi > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > index 2e027675d7bb..a6f1700961e3 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -203,6 +203,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb > dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb > dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb > dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb > +dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb > > imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo > imx8mm-venice-gw72xx-0x-rpidsi-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo > diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts > new file mode 100644 > index 000000000000..85b1355cf805 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts > @@ -0,0 +1,307 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright 2021 NXP > + * Copyright 2023 Variscite Ltd. > + */ > + > +/dts-v1/; > + > +#include "imx93-var-som.dtsi" > + > +/{ > + model = "Variscite VAR-SOM-MX93 on Symphony evaluation board"; > + compatible = "variscite,var-som-imx93-symphony", "variscite,var-som-mx93", "fsl,imx93"; Please run scripts/checkpatch.pl and fix reported warnings. Some warnings can be ignored, but the code here looks like it needs a fix. Feel free to get in touch if the warning is not clear. Also, wrap it at 80. > + > + aliases { > + ethernet1 = &fec; > + }; > + > + chosen { > + stdout-path = &lpuart1; > + }; > + > + /* > + * Needed only for Symphony <= v1.5 > + */ > + reg_fec_phy: regulator-fec-phy { > + compatible = "regulator-fixed"; > + regulator-name = "fec-phy"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-enable-ramp-delay = <20000>; > + gpio = <&pca9534 7 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + regulator-always-on; > + }; > + > + reg_usdhc2_vmmc: regulator-usdhc2 { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; > + regulator-name = "VSD_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>; > + off-on-delay-us = <20000>; > + enable-active-high; > + }; > + > + reg_vref_1v8: regulator-adc-vref { > + compatible = "regulator-fixed"; > + regulator-name = "vref_1v8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + ethosu_mem: ethosu_region@88000000 { No underscores in node names. Please do not upstream downstream DTS, but fix it to match proper Linux coding style. ... > + pinctrl_lpi2c1: lpi2c1grp { > + fsl,pins = < > + MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e > + MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e > + >; > + }; > + > + pinctrl_lpi2c1_gpio: lpi2c1grp-gpio { It does not look like you tested the DTS against bindings. Please run `make dtbs_check W=1` (see Documentation/devicetree/bindings/writing-schema.rst or https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/ for instructions). ... > + > +&lpi2c1 { > + #address-cells = <1>; > + #size-cells = <0>; > + clock-frequency = <400000>; > + pinctrl-names = "default", "sleep", "gpio"; > + pinctrl-0 = <&pinctrl_lpi2c1>; > + pinctrl-1 = <&pinctrl_lpi2c1_gpio>; > + pinctrl-2 = <&pinctrl_lpi2c1_gpio>; > + scl-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; > + sda-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; > + status = "okay"; > + > + /* DS1337 RTC module */ > + rtc@68 { > + status = "okay"; Drop. It is never the first property, BTW. > + compatible = "dallas,ds1337"; > + reg = <0x68>; > + }; > +}; > + > +&lpi2c5 { > + #address-cells = <1>; > + #size-cells = <0>; > + clock-frequency = <400000>; > + pinctrl-names = "default", "sleep", "gpio"; > + pinctrl-0 = <&pinctrl_lpi2c5>; > + pinctrl-1 = <&pinctrl_lpi2c5_gpio>; > + pinctrl-2 = <&pinctrl_lpi2c5_gpio>; > + scl-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; > + sda-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; > + status = "okay"; > + > + pca9534: gpio@20 { > + status = "okay"; Drop. > + compatible = "nxp,pca9534"; > + reg = <0x20>; > + gpio-controller; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pca9534>; > + interrupt-parent = <&gpio3>; > + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; > + #gpio-cells = <2>; > + wakeup-source; > + }; > +}; ... > diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi > new file mode 100644 > index 000000000000..30b969d0134d > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi > @@ -0,0 +1,312 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright 2022 NXP > + * Copyright 2023 Variscite Ltd. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/usb/pd.h> > +#include "imx93.dtsi" > + > +/{ > + model = "Variscite VAR-SOM-MX93 module"; > + compatible = "variscite,var-som-imx93", "fsl,imx93"; Please run scripts/checkpatch.pl and fix reported warnings. Some warnings can be ignored, but the code here looks like it needs a fix. Feel free to get in touch if the warning is not clear. > + > + iw612_pwrseq: iw612_pwrseq { Node names should be generic. See also an explanation and list of examples (not exhaustive) in DT specification: https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > + compatible = "mmc-pwrseq-simple"; > + post-power-on-delay-ms = <100>; > + power-off-delay-us = <10000>; > + reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>, /* WIFI_RESET */ > + <&gpio3 7 GPIO_ACTIVE_LOW>; /* WIFI_PWR_EN */ > + status = "okay"; Drop .... > + pinctrl_lpi2c3: lpi2c3grp { > + fsl,pins = < > + MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e > + MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e > + >; > + }; > + > + pinctrl_lpi2c3_gpio: lpi2c3grp-gpio { It does not look like you tested the DTS against bindings. Please run `make dtbs_check W=1` (see Documentation/devicetree/bindings/writing-schema.rst or https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/ for instructions). ... > + > +&lpi2c3 { > + #address-cells = <1>; > + #size-cells = <0>; > + clock-frequency = <400000>; > + pinctrl-names = "default", "sleep", "gpio"; > + pinctrl-0 = <&pinctrl_lpi2c3>; > + pinctrl-1 = <&pinctrl_lpi2c3_gpio>; > + pinctrl-2 = <&pinctrl_lpi2c3_gpio>; > + scl-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; > + sda-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; > + status = "okay"; > + > + pmic@25 { > + compatible = "nxp,pca9451a"; Please run scripts/checkpatch.pl and fix reported warnings. Some warnings can be ignored, but the code here looks like it needs a fix. Feel free to get in touch if the warning is not clear. I don't see this compatible documented and cover letter or changelog does not mention neither dependencies nor other series bringing it. > + reg = <0x25>; > + > + regulators { > + buck1: BUCK1 { Lowercase > + regulator-name = "BUCK1"; > + regulator-min-microvolt = <650000>; > + regulator-max-microvolt = <2237500>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <3125>; > + }; > + > + buck2: BUCK2 { Lowercase, further as well ... Best regards, Krzysztof

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 2e027675d7bb..a6f1700961e3 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -203,6 +203,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb +dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo imx8mm-venice-gw72xx-0x-rpidsi-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts new file mode 100644 index 000000000000..85b1355cf805 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts @@ -0,0 +1,307 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2021 NXP + * Copyright 2023 Variscite Ltd. + */ + +/dts-v1/; + +#include "imx93-var-som.dtsi" + +/{ + model = "Variscite VAR-SOM-MX93 on Symphony evaluation board"; + compatible = "variscite,var-som-imx93-symphony", "variscite,var-som-mx93", "fsl,imx93"; + + aliases { + ethernet1 = &fec; + }; + + chosen { + stdout-path = &lpuart1; + }; + + /* + * Needed only for Symphony <= v1.5 + */ + reg_fec_phy: regulator-fec-phy { + compatible = "regulator-fixed"; + regulator-name = "fec-phy"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <20000>; + gpio = <&pca9534 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>; + off-on-delay-us = <20000>; + enable-active-high; + }; + + reg_vref_1v8: regulator-adc-vref { + compatible = "regulator-fixed"; + regulator-name = "vref_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ethosu_mem: ethosu_region@88000000 { + compatible = "shared-dma-pool"; + reusable; + reg = <0x0 0x88000000 0x0 0x8000000>; + }; + + vdev0vring0: vdev0vring0@87ee0000 { + reg = <0 0x87ee0000 0 0x8000>; + no-map; + }; + + vdev0vring1: vdev0vring1@87ee8000 { + reg = <0 0x87ee8000 0 0x8000>; + no-map; + }; + + vdev1vring0: vdev1vring0@87ef0000 { + reg = <0 0x87ef0000 0 0x8000>; + no-map; + }; + + vdev1vring1: vdev1vring1@87ef8000 { + reg = <0 0x87ef8000 0 0x8000>; + no-map; + }; + + rsc_table: rsc-table@2021f000 { + reg = <0 0x2021f000 0 0x1000>; + no-map; + }; + + vdevbuffer: vdevbuffer@87f00000 { + compatible = "shared-dma-pool"; + reg = <0 0x87f00000 0 0x100000>; + no-map; + }; + + ele_reserved: ele-reserved@87de0000 { + compatible = "shared-dma-pool"; + reg = <0 0x87de0000 0 0x100000>; + no-map; + }; + }; +}; + +/* Use external instead of internal RTC*/ +&bbnsm_rtc { + status = "disabled"; +}; + +&eqos { + mdio { + ethphy1: ethernet-phy@5 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <5>; + qca,disable-smarteee; + eee-broken-1000t; + reset-gpios = <&pca9534 5 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <20000>; + vddio-supply = <&vddio1>; + + vddio1: vddio-regulator { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii"; + phy-handle = <&ethphy1>; + phy-supply = <&reg_fec_phy>; + status = "okay"; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec: fecgrp { + fsl,pins = < + MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e + MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e + MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e + MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e + MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe + MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e + MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e + MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e + MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e + MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e + MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x5fe + MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX93_PAD_PDM_CLK__CAN1_TX 0x139e + MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e + >; + }; + + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e + MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c1_gpio: lpi2c1grp-gpio { + fsl,pins = < + MX93_PAD_I2C1_SCL__GPIO1_IO00 0x31e + MX93_PAD_I2C1_SDA__GPIO1_IO01 0x31e + >; + }; + + pinctrl_lpi2c5: lpi2c5grp { + fsl,pins = < + MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e + MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c5_gpio: lpi2c5grp-gpio { + fsl,pins = < + MX93_PAD_GPIO_IO23__GPIO2_IO23 0x31e + MX93_PAD_GPIO_IO22__GPIO2_IO22 0x31e + >; + }; + + pinctrl_pca9534: pca9534grp { + fsl,pins = < + MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX93_PAD_UART1_RXD__LPUART1_RX 0x31e + MX93_PAD_UART1_TXD__LPUART1_TX 0x31e + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX93_PAD_GPIO_IO18__GPIO2_IO18 0x31e + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe + MX93_PAD_SD2_CMD__USDHC2_CMD 0x13fe + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e + >; + }; +}; + +&lpi2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c1>; + pinctrl-1 = <&pinctrl_lpi2c1_gpio>; + pinctrl-2 = <&pinctrl_lpi2c1_gpio>; + scl-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + status = "okay"; + + /* DS1337 RTC module */ + rtc@68 { + status = "okay"; + compatible = "dallas,ds1337"; + reg = <0x68>; + }; +}; + +&lpi2c5 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c5>; + pinctrl-1 = <&pinctrl_lpi2c5_gpio>; + pinctrl-2 = <&pinctrl_lpi2c5_gpio>; + scl-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + status = "okay"; + + pca9534: gpio@20 { + status = "okay"; + compatible = "nxp,pca9534"; + reg = <0x20>; + gpio-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9534>; + interrupt-parent = <&gpio3>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + #gpio-cells = <2>; + wakeup-source; + }; +}; + +/* Console */ +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* SD */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>; + vmmc-supply = <&reg_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; + no-sdio; + no-mmc; +}; + +/* Watchdog */ +&wdog3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi new file mode 100644 index 000000000000..30b969d0134d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi @@ -0,0 +1,312 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 NXP + * Copyright 2023 Variscite Ltd. + */ + +/dts-v1/; + +#include <dt-bindings/usb/pd.h> +#include "imx93.dtsi" + +/{ + model = "Variscite VAR-SOM-MX93 module"; + compatible = "variscite,var-som-imx93", "fsl,imx93"; + + iw612_pwrseq: iw612_pwrseq { + compatible = "mmc-pwrseq-simple"; + post-power-on-delay-ms = <100>; + power-off-delay-us = <10000>; + reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>, /* WIFI_RESET */ + <&gpio3 7 GPIO_ACTIVE_LOW>; /* WIFI_PWR_EN */ + status = "okay"; + }; + + reg_eqos_phy: regulator-eqos-phy { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_eqos_phy>; + regulator-name = "eth_phy_pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100000>; + regulator-always-on; + }; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii"; + phy-handle = <&ethphy0>; + phy-supply = <&reg_eqos_phy>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <1000000>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + eee-broken-1000t; + }; + }; +}; + +&iomuxc { + pinctrl_bt: btgrp { + fsl,pins = < + MX93_PAD_ENET2_MDIO__GPIO4_IO15 0x51e + >; + }; + + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x57e + MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x57e + MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e + MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e + MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e + MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e + MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x5fe + MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e + MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e + MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e + MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e + MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e + MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x5fe + MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e + >; + }; + + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e + MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e + >; + }; + + pinctrl_lpi2c3_gpio: lpi2c3grp-gpio { + fsl,pins = < + MX93_PAD_GPIO_IO28__GPIO2_IO28 0x40000b9e + MX93_PAD_GPIO_IO29__GPIO2_IO29 0x40000b9e + >; + }; + + pinctrl_lpspi8: lpspi8grp { + fsl,pins = < + MX93_PAD_GPIO_IO12__GPIO2_IO12 0x31e + MX93_PAD_GPIO_IO13__LPSPI8_SIN 0x31e + MX93_PAD_GPIO_IO14__LPSPI8_SOUT 0x31e + MX93_PAD_GPIO_IO15__LPSPI8_SCK 0x31e + >; + }; + + pinctrl_reg_eqos_phy: regeqosgrp { + fsl,pins = < + MX93_PAD_UART2_TXD__GPIO1_IO07 0x51e + >; + }; + + pinctrl_wifi: wifigrp { + fsl,pins = < + MX93_PAD_ENET2_MDC__GPIO4_IO14 0x51e /* WIFI_REG_ON */ + MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x51e /* WIFI_PWR_EN */ + >; + }; + + pinctrl_restouch: restouchgrp { + fsl,pins = < + MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x31e + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX93_PAD_SAI1_TXC__SAI1_TX_BCLK 0x31e + MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x31e + MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00 0x31e + MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00 0x31e + MX93_PAD_I2C2_SDA__SAI1_RX_BCLK 0x31e + MX93_PAD_I2C2_SCL__SAI1_RX_SYNC 0x31e + MX93_PAD_UART2_RXD__SAI1_MCLK 0x31e + >; + }; + + pinctrl_sai1_sleep: sai1grp-sleep { + fsl,pins = < + MX93_PAD_SAI1_TXC__GPIO1_IO12 0x31e + MX93_PAD_SAI1_TXFS__GPIO1_IO11 0x31e + MX93_PAD_SAI1_TXD0__GPIO1_IO13 0x31e + MX93_PAD_SAI1_RXD0__GPIO1_IO14 0x31e + MX93_PAD_UART2_RXD__GPIO1_IO06 0x31e + MX93_PAD_I2C2_SDA__GPIO1_IO03 0x31e + MX93_PAD_I2C2_SCL__GPIO1_IO02 0x31e + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e + MX93_PAD_DAP_TDI__LPUART5_RX 0x31e + MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e + MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe + MX93_PAD_SD1_CMD__USDHC1_CMD 0x13fe + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x1382 + MX93_PAD_SD3_CMD__USDHC3_CMD 0x1382 + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x1382 + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x1382 + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x1382 + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x1382 + >; + }; + + pinctrl_usdhc3_sleep: usdhc3grp-sleep { + fsl,pins = < + MX93_PAD_SD3_CLK__GPIO3_IO20 0x400 + MX93_PAD_SD3_CMD__GPIO3_IO21 0x400 + MX93_PAD_SD3_DATA0__GPIO3_IO22 0x400 + MX93_PAD_SD3_DATA1__GPIO3_IO23 0x400 + MX93_PAD_SD3_DATA2__GPIO3_IO24 0x400 + MX93_PAD_SD3_DATA3__GPIO3_IO25 0x400 + >; + }; +}; + +&lpi2c3 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c3>; + pinctrl-1 = <&pinctrl_lpi2c3_gpio>; + pinctrl-2 = <&pinctrl_lpi2c3_gpio>; + scl-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + status = "okay"; + + pmic@25 { + compatible = "nxp,pca9451a"; + reg = <0x25>; + + regulators { + buck1: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2237500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck4: BUCK4{ + regulator-name = "BUCK4"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5{ + regulator-name = "BUCK5"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +/* eMMC */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1>; + bus-width = <8>; + non-removable; + status = "okay"; +};

arm64: dts: imx93-var-som: Add Variscite VAR-SOM-MX93

Commit Message

Comments

Patch