@@ -3515,7 +3515,7 @@ FIT uImage format:
CONFIG_SPL_LIBDISK_SUPPORT
Support for disk/libdisk.o in SPL binary
- CONFIG_SPL_I2C_SUPPORT
+ CONFIG_SPL_I2C
Support for drivers/i2c/libi2c.o in SPL binary
CONFIG_SPL_GPIO
@@ -241,7 +241,7 @@ void board_init_f(ulong dummy)
preloader_console_init();
-#ifdef CONFIG_SPL_I2C_SUPPORT
+#ifdef CONFIG_SPL_I2C
i2c_init_all();
#endif
@@ -47,7 +47,7 @@ are supported:
CONFIG_SPL_LIBCOMMON_SUPPORT (common/libcommon.o)
CONFIG_SPL_LIBDISK_SUPPORT (disk/libdisk.o)
-CONFIG_SPL_I2C_SUPPORT (drivers/i2c/libi2c.o)
+CONFIG_SPL_I2C (drivers/i2c/libi2c.o)
CONFIG_SPL_GPIO (drivers/gpio/libgpio.o)
CONFIG_SPL_MMC_SUPPORT (drivers/mmc/libmmc.o)
CONFIG_SPL_SERIAL (drivers/serial/libserial.o)
@@ -11,7 +11,7 @@ obj-$(CONFIG_$(SPL_)RAM) += ram/
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SPL_CRYPTO_SUPPORT) += crypto/
-obj-$(CONFIG_SPL_I2C_SUPPORT) += i2c/
+obj-$(CONFIG_SPL_I2C) += i2c/
obj-$(CONFIG_SPL_GPIO) += gpio/
obj-$(CONFIG_SPL_MMC_SUPPORT) += mmc/
obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
@@ -28,7 +28,7 @@
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_FSL_LAW /* Use common FSL init code */
#define CONFIG_SYS_TEXT_BASE 0x00201000
@@ -32,7 +32,7 @@
#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
@@ -29,7 +29,7 @@
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_FSL_LAW /* Use common FSL init code */
#define CONFIG_SYS_TEXT_BASE 0x11001000
#define CONFIG_SPL_TEXT_BASE 0xD0001000
@@ -64,7 +64,7 @@
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_FSL_LAW /* Use common FSL init code */
#define CONFIG_SYS_TEXT_BASE 0x11001000
#define CONFIG_SPL_TEXT_BASE 0xD0001000
@@ -111,7 +111,7 @@
#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
@@ -23,7 +23,7 @@
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_FSL_LAW /* Use common FSL init code */
#define CONFIG_SYS_TEXT_BASE 0x11001000
#define CONFIG_SPL_TEXT_BASE 0xf8f81000
@@ -52,7 +52,7 @@
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_FSL_LAW /* Use common FSL init code */
#define CONFIG_SYS_TEXT_BASE 0x11001000
#define CONFIG_SPL_TEXT_BASE 0xf8f81000
@@ -83,7 +83,7 @@
#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_COMMON_INIT_DDR
@@ -50,7 +50,7 @@
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_FSL_LAW /* Use common FSL init code */
#define CONFIG_SYS_TEXT_BASE 0x00201000
@@ -57,7 +57,7 @@
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_FSL_LAW /* Use common FSL init code */
#define CONFIG_SYS_TEXT_BASE 0x30001000
@@ -50,7 +50,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_FSL_LAW /* Use common FSL init code */
#define CONFIG_SYS_TEXT_BASE 0x30001000
@@ -60,7 +60,7 @@
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_FSL_LAW /* Use common FSL init code */
#define CONFIG_SYS_TEXT_BASE 0x00201000
@@ -49,7 +49,7 @@
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_FSL_LAW /* Use common FSL init code */
#define CONFIG_SYS_TEXT_BASE 0x00201000
@@ -32,7 +32,7 @@
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_FSL_LAW /* Use common FSL init code */
#define CONFIG_SYS_TEXT_BASE 0x00201000
@@ -32,7 +32,7 @@
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_FSL_LAW /* Use common FSL init code */
#define CONFIG_SYS_TEXT_BASE 0x00201000
@@ -289,7 +289,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
@@ -346,7 +346,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
@@ -113,7 +113,7 @@
#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN
/* General parts of the framework, required. */
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL
@@ -27,7 +27,7 @@
#define CONFIG_KEYBOARD
#define CONFIG_SPL_POWER_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SYS_WHITE_ON_BLACK
#define CONFIG_CONSOLE_SCROLL_LINES 10
@@ -126,7 +126,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
/* SPL related SPI defines */
@@ -308,7 +308,7 @@
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
@@ -160,7 +160,7 @@
#define CONFIG_SPL_SPI_SUPPORT
#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_POWER_SUPPORT
/* EEPROM */
@@ -94,7 +94,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
/* SPL related SPI defines */
#define CONFIG_SPL_SPI_SUPPORT
@@ -127,7 +127,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
/* SPL related SPI defines */
@@ -119,7 +119,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
/* SPL related SPI defines */
#define CONFIG_SPL_SPI_SUPPORT
@@ -125,7 +125,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
/* SPL related SPI defines */
#define CONFIG_SPL_SPI_SUPPORT
@@ -32,7 +32,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_GPIO
#define CONFIG_SPL_WATCHDOG_SUPPORT
@@ -135,7 +135,7 @@
#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SPL_GPIO
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 2
@@ -71,7 +71,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_WATCHDOG_SUPPORT
#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
@@ -109,7 +109,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_WATCHDOG_SUPPORT
#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_NAND_SUPPORT
@@ -116,7 +116,7 @@
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_WATCHDOG_SUPPORT
#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_MMC_SUPPORT
@@ -65,7 +65,7 @@
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_WATCHDOG_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
@@ -95,7 +95,7 @@
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_WATCHDOG_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
@@ -268,7 +268,7 @@ unsigned long long get_qixis_addr(void);
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
@@ -87,7 +87,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
/* SPL related SPI defines */
#define CONFIG_SPL_SPI_SUPPORT
@@ -322,7 +322,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
@@ -351,7 +351,7 @@
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_POWER_SUPPORT
@@ -190,7 +190,7 @@
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_FSL_LAW /* Use common FSL init code */
#define CONFIG_SYS_TEXT_BASE 0x11001000
#define CONFIG_SPL_TEXT_BASE 0xf8f81000
@@ -219,7 +219,7 @@
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_FSL_LAW /* Use common FSL init code */
#define CONFIG_SYS_TEXT_BASE 0x11001000
#define CONFIG_SPL_TEXT_BASE 0xf8f81000
@@ -246,7 +246,7 @@
#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_COMMON_INIT_DDR
@@ -136,7 +136,7 @@
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_FS_FAT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
@@ -143,7 +143,7 @@
#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SPL_GPIO
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
@@ -232,7 +232,7 @@
/* I2C */
#if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
defined CONFIG_SY8106A_POWER
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#endif
#if defined CONFIG_I2C0_ENABLE || defined CONFIG_I2C1_ENABLE || \
@@ -203,7 +203,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
@@ -290,7 +290,7 @@
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
@@ -152,7 +152,7 @@
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
/* SPL related SPI defines */
#define CONFIG_SPL_SPI_SUPPORT
@@ -270,7 +270,7 @@
#define CONFIG_SYS_THUMB_BUILD
/* General parts of the framework, required. */
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL
@@ -164,7 +164,7 @@
/* No need for i2c in SPL mode as we will use SRI2C for PMIC access on OMAP4 */
#undef CONFIG_SYS_I2C
#undef CONFIG_SYS_I2C_OMAP24XX
-#undef CONFIG_SPL_I2C_SUPPORT
+#undef CONFIG_SPL_I2C
#endif
#endif /* __CONFIG_TI_OMAP4_COMMON_H */
@@ -322,7 +322,7 @@
#define CONFIG_SPL_GPIO
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_I2C
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL
#define CONFIG_SPL_POWER_SUPPORT
We conventionally named SPL options in CONFIG_SPL_*_SUPPORT format, but the suffix _SUPPORT did not add any value. Besides, it prevents us from exploiting the CONFIG_IS_ENABLED() macro. If we move the option to defconfig files (that are often re-synced), the renaming would be more conflict-happy, so I want to do this now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- README | 2 +- board/freescale/ls1021aqds/ls1021aqds.c | 2 +- doc/README.SPL | 2 +- drivers/Makefile | 2 +- include/configs/B4860QDS.h | 2 +- include/configs/C29XPCIE.h | 2 +- include/configs/P1010RDB.h | 6 +++--- include/configs/P1022DS.h | 6 +++--- include/configs/T102xQDS.h | 2 +- include/configs/T102xRDB.h | 2 +- include/configs/T104xRDB.h | 2 +- include/configs/T208xQDS.h | 2 +- include/configs/T208xRDB.h | 2 +- include/configs/T4240QDS.h | 2 +- include/configs/T4240RDB.h | 2 +- include/configs/am3517_crane.h | 2 +- include/configs/am3517_evm.h | 2 +- include/configs/bur_am335x_common.h | 2 +- include/configs/chromebook_jerry.h | 2 +- include/configs/clearfog.h | 2 +- include/configs/cm_t35.h | 2 +- include/configs/cm_t43.h | 2 +- include/configs/db-88f6720.h | 2 +- include/configs/db-88f6820-gp.h | 2 +- include/configs/db-mv784mp-gp.h | 2 +- include/configs/ds414.h | 2 +- include/configs/imx6_spl.h | 2 +- include/configs/kc1.h | 2 +- include/configs/ls1021aqds.h | 4 ++-- include/configs/ls1021atwr.h | 2 +- include/configs/ls1043a_common.h | 4 ++-- include/configs/ls2080a_common.h | 2 +- include/configs/maxbcm.h | 2 +- include/configs/mcx.h | 2 +- include/configs/omap3_evm.h | 2 +- include/configs/p1_p2_rdb_pc.h | 6 +++--- include/configs/siemens-am33x-common.h | 2 +- include/configs/sniper.h | 2 +- include/configs/sunxi-common.h | 2 +- include/configs/tam3517-common.h | 2 +- include/configs/tao3530.h | 2 +- include/configs/theadorable.h | 2 +- include/configs/ti_armv7_common.h | 2 +- include/configs/ti_omap4_common.h | 2 +- include/configs/tricorder.h | 2 +- 45 files changed, 53 insertions(+), 53 deletions(-) -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot