diff mbox

[10/15] ARM: uniphier: move XIRQ pin-mux settings of LD11/LD20

Message ID 1474050792-23218-11-git-send-email-yamada.masahiro@socionext.com
State Accepted
Commit b78ffc53c58431cf8b710304676f9404f2fb9dd5
Headers show

Commit Message

Masahiro Yamada Sept. 16, 2016, 6:33 p.m. UTC 
This is the last code in the mach-uniphier/pinctrl/ directory.
Push the remaining code out to delete the directory entirely.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

---

 arch/arm/mach-uniphier/Makefile               |  2 +-
 arch/arm/mach-uniphier/board_init.c           | 11 +++++++++--
 arch/arm/mach-uniphier/init.h                 |  2 --
 arch/arm/mach-uniphier/pinctrl/Makefile       |  6 ------
 arch/arm/mach-uniphier/pinctrl/pinctrl-ld20.c | 20 --------------------
 5 files changed, 10 insertions(+), 31 deletions(-)
 delete mode 100644 arch/arm/mach-uniphier/pinctrl/Makefile
 delete mode 100644 arch/arm/mach-uniphier/pinctrl/pinctrl-ld20.c

-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
diff mbox

Patch

diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile
index df6888f..548cfe7 100644
--- a/arch/arm/mach-uniphier/Makefile
+++ b/arch/arm/mach-uniphier/Makefile
@@ -15,7 +15,7 @@  obj-y += board_init.o
 obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o
 obj-y += reset.o
 
-obj-y += pinctrl/ clk/
+obj-y += clk/
 
 endif
 
diff --git a/arch/arm/mach-uniphier/board_init.c b/arch/arm/mach-uniphier/board_init.c
index 228092c..c9d3f28 100644
--- a/arch/arm/mach-uniphier/board_init.c
+++ b/arch/arm/mach-uniphier/board_init.c
@@ -12,6 +12,7 @@ 
 
 #include "init.h"
 #include "micro-support-card.h"
+#include "sg-regs.h"
 #include "soc-info.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -112,7 +113,10 @@  int board_init(void)
 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
 	case SOC_UNIPHIER_LD11:
 		uniphier_nand_pin_init(false);
-		uniphier_ld20_pin_init();
+		sg_set_pinsel(149, 14, 8, 4);	/* XIRQ0    -> XIRQ0 */
+		sg_set_iectrl(149);
+		sg_set_pinsel(153, 14, 8, 4);	/* XIRQ4    -> XIRQ4 */
+		sg_set_iectrl(153);
 		led_puts("U1");
 		uniphier_ld11_clk_init();
 		break;
@@ -120,7 +124,10 @@  int board_init(void)
 #if defined(CONFIG_ARCH_UNIPHIER_LD20)
 	case SOC_UNIPHIER_LD20:
 		uniphier_nand_pin_init(false);
-		uniphier_ld20_pin_init();
+		sg_set_pinsel(149, 14, 8, 4);	/* XIRQ0    -> XIRQ0 */
+		sg_set_iectrl(149);
+		sg_set_pinsel(153, 14, 8, 4);	/* XIRQ4    -> XIRQ4 */
+		sg_set_iectrl(153);
 		led_puts("U1");
 		uniphier_ld20_clk_init();
 		cci500_init(2);
diff --git a/arch/arm/mach-uniphier/init.h b/arch/arm/mach-uniphier/init.h
index bc524a1..1dc53d5 100644
--- a/arch/arm/mach-uniphier/init.h
+++ b/arch/arm/mach-uniphier/init.h
@@ -101,8 +101,6 @@  int uniphier_pxs2_umc_init(const struct uniphier_board_data *bd);
 int uniphier_ld20_umc_init(const struct uniphier_board_data *bd);
 int uniphier_ld11_umc_init(const struct uniphier_board_data *bd);
 
-void uniphier_ld20_pin_init(void);
-
 void uniphier_ld4_clk_init(void);
 void uniphier_pro4_clk_init(void);
 void uniphier_pro5_clk_init(void);
diff --git a/arch/arm/mach-uniphier/pinctrl/Makefile b/arch/arm/mach-uniphier/pinctrl/Makefile
deleted file mode 100644
index 4ee9553..0000000
--- a/arch/arm/mach-uniphier/pinctrl/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@ 
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-$(CONFIG_ARCH_UNIPHIER_LD11)	+= pinctrl-ld20.o
-obj-$(CONFIG_ARCH_UNIPHIER_LD20)	+= pinctrl-ld20.o
diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ld20.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ld20.c
deleted file mode 100644
index e1cb90a..0000000
--- a/arch/arm/mach-uniphier/pinctrl/pinctrl-ld20.c
+++ /dev/null
@@ -1,20 +0,0 @@ 
-/*
- * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <linux/io.h>
-
-#include "../init.h"
-#include "../sg-regs.h"
-
-void uniphier_ld20_pin_init(void)
-{
-	/* Comment format:    PAD Name -> Function Name */
-
-	sg_set_pinsel(149, 14, 8, 4);	/* XIRQ0    -> XIRQ0 */
-	sg_set_iectrl(149);
-	sg_set_pinsel(153, 14, 8, 4);	/* XIRQ4    -> XIRQ4 */
-	sg_set_iectrl(153);
-}