@@ -1320,12 +1320,16 @@ usb_1: usb@a6f8800 {
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <150000000>;
- interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 9 IRQ_TYPE_EDGE_BOTH>,
<&pdc 8 IRQ_TYPE_EDGE_BOTH>,
- <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
- interrupt-names = "hs_phy_irq", "ss_phy_irq",
- "dm_hs_phy_irq", "dp_hs_phy_irq";
+ <&pdc 6 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "hs_phy_irq",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
@@ -4058,12 +4058,16 @@ usb_1: usb@a6f8800 {
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <150000000>;
- interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc_intc 6 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>,
<&pdc_intc 8 IRQ_TYPE_EDGE_BOTH>,
- <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>;
- interrupt-names = "hs_phy_irq", "ss_phy_irq",
- "dm_hs_phy_irq", "dp_hs_phy_irq";
+ <&pdc_intc 6 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "hs_phy_irq",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
@@ -4109,12 +4113,16 @@ usb_2: usb@a8f8800 {
<&gcc GCC_USB30_SEC_MASTER_CLK>;
assigned-clock-rates = <19200000>, <150000000>;
- interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc_intc 7 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts-extended = <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>,
<&pdc_intc 10 IRQ_TYPE_EDGE_BOTH>,
- <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>;
- interrupt-names = "hs_phy_irq", "ss_phy_irq",
- "dm_hs_phy_irq", "dp_hs_phy_irq";
+ <&pdc_intc 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "hs_phy_irq",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
power-domains = <&gcc USB30_SEC_GDSC>;
@@ -1830,12 +1830,15 @@ usb_1: usb@a6f8800 {
"mock_utmi";
interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
<&pdc 15 IRQ_TYPE_EDGE_BOTH>,
- <&pdc 14 IRQ_TYPE_EDGE_BOTH>;
-
- interrupt-names = "hs_phy_irq", "ss_phy_irq",
- "dm_hs_phy_irq", "dp_hs_phy_irq";
+ <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "hs_phy_irq",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
For sm6350/sdm670/sdm845, although they are qusb2 phy targets, dp/dm interrupts are used for wakeup instead of qusb2_phy irq. These targets were part of a generation that were the last ones to implement QUSB2 PHY and the design incorporated dedicated DP/DM interrupts which eventually carried forward to the newer femto based targets. Add the missing pwr_event irq for these targets. Also modify order of interrupts in accordance to bindings update. Modifying the order of these interrupts is harmless as the driver tries to get these interrupts from DT by name and not by index. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> --- arch/arm64/boot/dts/qcom/sdm670.dtsi | 14 +++++++++----- arch/arm64/boot/dts/qcom/sdm845.dtsi | 28 ++++++++++++++++++---------- arch/arm64/boot/dts/qcom/sm6350.dtsi | 13 ++++++++----- 3 files changed, 35 insertions(+), 20 deletions(-)