diff mbox series

[v2,5/5] arm64: dts: renesas: r9a07g043u11-smarc-cru-csi-ov5645: Reduce I2C frequency

Message ID 20240126133116.121981-6-biju.das.jz@bp.renesas.com
State New
Headers show
Series [v2,1/5] media: dt-bindings: renesas,rzg2l-csi2: Document Renesas RZ/G2UL CSI-2 block | expand

Commit Message

Biju Das Jan. 26, 2024, 1:31 p.m. UTC 
Reduce i2c freq from 400->100 kHz on RZ/G2UL SMARC EVK as the captured
image is not proper with the sensor configuration over I2C.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v1->v2:
 * No change.
---
 .../boot/dts/renesas/r9a07g043u11-smarc-cru-csi-ov5645.dtso   | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc-cru-csi-ov5645.dtso b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc-cru-csi-ov5645.dtso
index b41bb4b31a26..bb769c0f3ca5 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc-cru-csi-ov5645.dtso
+++ b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc-cru-csi-ov5645.dtso
@@ -19,3 +19,7 @@  &ov5645 {
 	enable-gpios = <&pinctrl RZG2L_GPIO(4, 4) GPIO_ACTIVE_HIGH>;
 	reset-gpios = <&pinctrl RZG2L_GPIO(0, 1) GPIO_ACTIVE_LOW>;
 };
+
+&i2c0 {
+	clock-frequency = <100000>;
+};