@@ -62,6 +62,7 @@ typedef UINT32 MMC_CMD;
#define MMC_CMD20 (MMC_INDX(20) | MMC_CMD_WAIT_RESPONSE)
#define MMC_CMD23 (MMC_INDX(23) | MMC_CMD_WAIT_RESPONSE)
#define MMC_CMD24 (MMC_INDX(24) | MMC_CMD_WAIT_RESPONSE)
+#define MMC_CMD25 (MMC_INDX(25) | MMC_CMD_WAIT_RESPONSE)
#define MMC_CMD55 (MMC_INDX(55) | MMC_CMD_WAIT_RESPONSE)
#define MMC_ACMD41 (MMC_INDX(41) | MMC_CMD_WAIT_RESPONSE | MMC_CMD_NO_CRC_RESPONSE)
#define MMC_ACMD51 (MMC_INDX(51) | MMC_CMD_WAIT_RESPONSE)
@@ -152,6 +153,10 @@ typedef EFI_STATUS (EFIAPI *MMC_SETIOS) (
IN UINT32 TimingMode
);
+typedef BOOLEAN (EFIAPI *MMC_ISMULTIBLOCK) (
+ IN EFI_MMC_HOST_PROTOCOL *This
+ );
+
struct _EFI_MMC_HOST_PROTOCOL {
@@ -169,6 +174,7 @@ struct _EFI_MMC_HOST_PROTOCOL {
MMC_WRITEBLOCKDATA WriteBlockData;
MMC_SETIOS SetIos;
+ MMC_ISMULTIBLOCK IsMultiBlock;
};
@@ -126,6 +126,95 @@ MmcStopTransmission (
#define MMCI0_BLOCKLEN 512
#define MMCI0_TIMEOUT 10000
+STATIC EFI_STATUS
+MmcTransferBlock (
+ IN EFI_BLOCK_IO_PROTOCOL *This,
+ IN UINTN Cmd,
+ IN UINTN Transfer,
+ IN UINT32 MediaId,
+ IN EFI_LBA Lba,
+ IN UINTN BufferSize,
+ OUT VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINTN CmdArg;
+ INTN Timeout;
+ UINT32 Response[4];
+ MMC_HOST_INSTANCE *MmcHostInstance;
+ EFI_MMC_HOST_PROTOCOL *MmcHost;
+
+ MmcHostInstance = MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS (This);
+ MmcHost = MmcHostInstance->MmcHost;
+
+ //Set command argument based on the card access mode (Byte mode or Block mode)
+ if (MmcHostInstance->CardInfo.OCRData.AccessMode & BIT1) {
+ CmdArg = Lba;
+ } else {
+ CmdArg = Lba * This->Media->BlockSize;
+ }
+
+ Status = MmcHost->SendCommand (MmcHost, Cmd, CmdArg);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "%a(MMC_CMD%d): Error %r\n", __func__, Cmd, Status));
+ return Status;
+ }
+
+ if (Transfer == MMC_IOBLOCKS_READ) {
+ // Read Data
+ Status = MmcHost->ReadBlockData (MmcHost, Lba, BufferSize, Buffer);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_BLKIO, "%a(): Error Read Block Data and Status = %r\n", __func__, Status));
+ MmcStopTransmission (MmcHost);
+ return Status;
+ }
+ Status = MmcNotifyState (MmcHostInstance, MmcProgrammingState);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "%a() : Error MmcProgrammingState\n", __func__));
+ return Status;
+ }
+ } else {
+ // Write Data
+ Status = MmcHost->WriteBlockData (MmcHost, Lba, BufferSize, Buffer);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_BLKIO, "%a(): Error Write Block Data and Status = %r\n", __func__, Status));
+ MmcStopTransmission (MmcHost);
+ return Status;
+ }
+ }
+
+ // Command 13 - Read status and wait for programming to complete (return to tran)
+ Timeout = MMCI0_TIMEOUT;
+ CmdArg = MmcHostInstance->CardInfo.RCA << 16;
+ Response[0] = 0;
+ while( (!(Response[0] & MMC_R0_READY_FOR_DATA))
+ && (MMC_R0_CURRENTSTATE (Response) != MMC_R0_STATE_TRAN)
+ && Timeout--) {
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD13, CmdArg);
+ if (!EFI_ERROR (Status)) {
+ MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response);
+ if ((Response[0] & MMC_R0_READY_FOR_DATA)) {
+ break; // Prevents delay once finished
+ }
+ }
+ gBS->Stall (1);
+ }
+
+ if (BufferSize > This->Media->BlockSize) {
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD12, 0);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_BLKIO, "%a(): Error and Status:%r\n", __func__, Status));
+ }
+ }
+
+ Status = MmcNotifyState (MmcHostInstance, MmcTransferState);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "MmcIoBlocks() : Error MmcTransferState\n"));
+ return Status;
+ }
+ return Status;
+}
+
EFI_STATUS
MmcIoBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
@@ -145,6 +234,7 @@ MmcIoBlocks (
EFI_MMC_HOST_PROTOCOL *MmcHost;
UINTN BytesRemainingToBeTransfered;
UINTN BlockCount;
+ UINTN ConsumeSize;
BlockCount = 1;
MmcHostInstance = MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS (This);
@@ -165,6 +255,10 @@ MmcIoBlocks (
return EFI_NO_MEDIA;
}
+ if (MmcHost->IsMultiBlock && MmcHost->IsMultiBlock(MmcHost)) {
+ BlockCount = (BufferSize + This->Media->BlockSize - 1) / This->Media->BlockSize;
+ }
+
// All blocks must be within the device
if ((Lba + (BufferSize / This->Media->BlockSize)) > (This->Media->LastBlock + 1)) {
return EFI_INVALID_PARAMETER;
@@ -210,75 +304,38 @@ MmcIoBlocks (
return EFI_NOT_READY;
}
- //Set command argument based on the card access mode (Byte mode or Block mode)
- if (MmcHostInstance->CardInfo.OCRData.AccessMode & BIT1) {
- CmdArg = Lba;
- } else {
- CmdArg = Lba * This->Media->BlockSize;
- }
-
- if (Transfer == MMC_IOBLOCKS_READ) {
- // Read a single block
- Cmd = MMC_CMD17;
- } else {
- // Write a single block
- Cmd = MMC_CMD24;
- }
- Status = MmcHost->SendCommand (MmcHost, Cmd, CmdArg);
- if (EFI_ERROR (Status)) {
- DEBUG ((EFI_D_ERROR, "MmcIoBlocks(MMC_CMD%d): Error %r\n", Cmd, Status));
- return Status;
- }
-
if (Transfer == MMC_IOBLOCKS_READ) {
- // Read one block of Data
- Status = MmcHost->ReadBlockData (MmcHost, Lba, This->Media->BlockSize, Buffer);
- if (EFI_ERROR (Status)) {
- DEBUG ((EFI_D_BLKIO, "MmcIoBlocks(): Error Read Block Data and Status = %r\n", Status));
- MmcStopTransmission (MmcHost);
- return Status;
- }
- Status = MmcNotifyState (MmcHostInstance, MmcProgrammingState);
- if (EFI_ERROR (Status)) {
- DEBUG ((EFI_D_ERROR, "MmcIoBlocks() : Error MmcProgrammingState\n"));
- return Status;
+ if (BlockCount == 1) {
+ // Read a single block
+ Cmd = MMC_CMD17;
+ } else {
+ // Read multiple blocks
+ Cmd = MMC_CMD18;
}
} else {
- // Write one block of Data
- Status = MmcHost->WriteBlockData (MmcHost, Lba, This->Media->BlockSize, Buffer);
- if (EFI_ERROR (Status)) {
- DEBUG ((EFI_D_BLKIO, "MmcIoBlocks(): Error Write Block Data and Status = %r\n", Status));
- MmcStopTransmission (MmcHost);
- return Status;
+ if (BlockCount == 1) {
+ // Write a single block
+ Cmd = MMC_CMD24;
+ } else {
+ // Write multiple blocks
+ Cmd = MMC_CMD25;
}
}
- // Command 13 - Read status and wait for programming to complete (return to tran)
- Timeout = MMCI0_TIMEOUT;
- CmdArg = MmcHostInstance->CardInfo.RCA << 16;
- Response[0] = 0;
- while( (!(Response[0] & MMC_R0_READY_FOR_DATA))
- && (MMC_R0_CURRENTSTATE (Response) != MMC_R0_STATE_TRAN)
- && Timeout--) {
- Status = MmcHost->SendCommand (MmcHost, MMC_CMD13, CmdArg);
- if (!EFI_ERROR (Status)) {
- MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response);
- if ((Response[0] & MMC_R0_READY_FOR_DATA)) {
- break; // Prevents delay once finished
- }
- }
- gBS->Stall (1);
+ ConsumeSize = BlockCount * This->Media->BlockSize;
+ if (BytesRemainingToBeTransfered < ConsumeSize) {
+ ConsumeSize = BytesRemainingToBeTransfered;
}
-
- Status = MmcNotifyState (MmcHostInstance, MmcTransferState);
+ Status = MmcTransferBlock (This, Cmd, Transfer, MediaId, Lba, ConsumeSize, Buffer);
if (EFI_ERROR (Status)) {
- DEBUG ((EFI_D_ERROR, "MmcIoBlocks() : Error MmcTransferState\n"));
- return Status;
+ DEBUG ((EFI_D_ERROR, "%a(): Failed to transfer block and Status:%r\n", __func__, Status));
}
- BytesRemainingToBeTransfered -= This->Media->BlockSize;
- Lba += BlockCount;
- Buffer = (UINT8 *)Buffer + This->Media->BlockSize;
+ BytesRemainingToBeTransfered -= ConsumeSize;
+ if (BytesRemainingToBeTransfered > 0) {
+ Lba += BlockCount;
+ Buffer = (UINT8 *)Buffer + ConsumeSize;
+ }
}
return EFI_SUCCESS;
Make use of DMA to transfer multiple blocks at one time. It could improve the performance on MMC/SD driver. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> --- EmbeddedPkg/Include/Protocol/MmcHost.h | 6 + EmbeddedPkg/Universal/MmcDxe/MmcBlockIo.c | 175 ++++++++++++++++++++---------- 2 files changed, 122 insertions(+), 59 deletions(-) -- 2.7.4 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel