diff mbox series

[v4,4/7] thermal: sun8i: extend H6 calibration to support 4 sensors

Message ID 20240209144221.3602382-5-andre.przywara@arm.com
State Superseded
Headers show
Series add support for H616 thermal system | expand

Commit Message

Andre Przywara Feb. 9, 2024, 2:42 p.m. UTC 
From: Maksim Kiselev <bigunclemax@gmail.com>

The H616 SoC resembles the H6 thermal sensor controller, with a few
changes like four sensors.

Extend sun50i_h6_ths_calibrate() function to support calibration of
these sensors.

Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Co-developed-by: Martin Botka <martin.botka@somainline.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 drivers/thermal/sun8i_thermal.c | 28 ++++++++++++++++++++--------
 1 file changed, 20 insertions(+), 8 deletions(-)

Comments

Jernej Škrabec Feb. 14, 2024, 8:35 p.m. UTC | #1 
Dne petek, 09. februar 2024 ob 15:42:18 CET je Andre Przywara napisal(a):
> From: Maksim Kiselev <bigunclemax@gmail.com>
> 
> The H616 SoC resembles the H6 thermal sensor controller, with a few
> changes like four sensors.
> 
> Extend sun50i_h6_ths_calibrate() function to support calibration of
> these sensors.
> 
> Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
> Co-developed-by: Martin Botka <martin.botka@somainline.org>
> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej
diff mbox series

Patch

diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index 42bee03c4e507..c919b0fd5e169 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -222,16 +222,21 @@  static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
 	struct device *dev = tmdev->dev;
 	int i, ft_temp;
 
-	if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num)
+	if (!caldata[0])
 		return -EINVAL;
 
 	/*
 	 * efuse layout:
 	 *
-	 *	0   11  16	 32
-	 *	+-------+-------+-------+
-	 *	|temp|  |sensor0|sensor1|
-	 *	+-------+-------+-------+
+	 * 0      11  16     27   32     43   48    57
+	 * +----------+-----------+-----------+-----------+
+	 * |  temp |  |sensor0|   |sensor1|   |sensor2|   |
+	 * +----------+-----------+-----------+-----------+
+	 *                      ^           ^           ^
+	 *                      |           |           |
+	 *                      |           |           sensor3[11:8]
+	 *                      |           sensor3[7:4]
+	 *                      sensor3[3:0]
 	 *
 	 * The calibration data on the H6 is the ambient temperature and
 	 * sensor values that are filled during the factory test stage.
@@ -244,9 +249,16 @@  static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
 	ft_temp = (caldata[0] & FT_TEMP_MASK) * 100;
 
 	for (i = 0; i < tmdev->chip->sensor_num; i++) {
-		int sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK;
-		int cdata, offset;
-		int sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
+		int sensor_reg, sensor_temp, cdata, offset;
+
+		if (i == 3)
+			sensor_reg = (caldata[1] >> 12)
+				     | ((caldata[2] >> 12) << 4)
+				     | ((caldata[3] >> 12) << 8);
+		else
+			sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK;
+
+		sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
 
 		/*
 		 * Calibration data is CALIBRATE_DEFAULT - (calculated