@@ -60,6 +60,8 @@ pci@c0000000 {
* We have slots (IDSEL) 1 and 2 with one assigned IRQ
* each handling all IRQs.
*/
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map =
/* IDSEL 1 */
<0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
@@ -89,6 +89,8 @@ pci@c0000000 {
* The slots have Ethernet, Ethernet, NEC and MPCI.
* The IDSELs are 11, 12, 13, 14.
*/
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map =
/* IDSEL 11 - Ethernet A */
<0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */
@@ -340,10 +340,10 @@ pcie_rc: pcie@1c00000 {
"msi8";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 0 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 0 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 0 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 0 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_PIPE_CLK>,
<&gcc GCC_PCIE_AUX_CLK>,
The dtc interrupt_map warning is off because its dependency, interrupt_provider, is off by default. Fix all the warnings so it can be enabled. Signed-off-by: Rob Herring <robh@kernel.org> --- arch/arm/boot/dts/intel/ixp/intel-ixp42x-gateway-7001.dts | 2 ++ arch/arm/boot/dts/intel/ixp/intel-ixp42x-goramo-multilink.dts | 2 ++ arch/arm/boot/dts/qcom/qcom-sdx55.dtsi | 8 ++++---- 3 files changed, 8 insertions(+), 4 deletions(-)