@@ -12,6 +12,7 @@
#include <linux/firmware/cirrus/cs_dsp.h>
#include <linux/regulator/consumer.h>
#include <linux/regmap.h>
+#include <sound/cs-amp-lib.h>
#define CS35L56_DEVID 0x0000000
#define CS35L56_REVID 0x0000004
@@ -23,6 +24,9 @@
#define CS35L56_BLOCK_ENABLES2 0x000201C
#define CS35L56_REFCLK_INPUT 0x0002C04
#define CS35L56_GLOBAL_SAMPLE_RATE 0x0002C0C
+#define CS35L56_OTP_MEM_53 0x00300D4
+#define CS35L56_OTP_MEM_54 0x00300D8
+#define CS35L56_OTP_MEM_55 0x00300DC
#define CS35L56_ASP1_ENABLES1 0x0004800
#define CS35L56_ASP1_CONTROL1 0x0004804
#define CS35L56_ASP1_CONTROL2 0x0004808
@@ -262,6 +266,9 @@ struct cs35l56_base {
bool fw_patched;
bool secured;
bool can_hibernate;
+ bool cal_data_valid;
+ s8 cal_index;
+ struct cirrus_amp_cal_data cal_data;
struct gpio_desc *reset_gpio;
};
@@ -269,6 +276,8 @@ extern struct regmap_config cs35l56_regmap_i2c;
extern struct regmap_config cs35l56_regmap_spi;
extern struct regmap_config cs35l56_regmap_sdw;
+extern const struct cirrus_amp_cal_controls cs35l56_calibration_controls;
+
extern const char * const cs35l56_tx_input_texts[CS35L56_NUM_INPUT_SRC];
extern const unsigned int cs35l56_tx_input_values[CS35L56_NUM_INPUT_SRC];
@@ -286,6 +295,7 @@ int cs35l56_is_fw_reload_needed(struct cs35l56_base *cs35l56_base);
int cs35l56_runtime_suspend_common(struct cs35l56_base *cs35l56_base);
int cs35l56_runtime_resume_common(struct cs35l56_base *cs35l56_base, bool is_soundwire);
void cs35l56_init_cs_dsp(struct cs35l56_base *cs35l56_base, struct cs_dsp *cs_dsp);
+int cs35l56_get_calibration(struct cs35l56_base *cs35l56_base);
int cs35l56_read_prot_status(struct cs35l56_base *cs35l56_base,
bool *fw_missing, unsigned int *fw_version);
int cs35l56_hw_init(struct cs35l56_base *cs35l56_base);
@@ -800,6 +800,7 @@ config SND_SOC_CS35L56
tristate
config SND_SOC_CS35L56_SHARED
+ select SND_SOC_CS_AMP_LIB
tristate
config SND_SOC_CS35L56_I2C
@@ -5,10 +5,12 @@
// Copyright (C) 2023 Cirrus Logic, Inc. and
// Cirrus Logic International Semiconductor Ltd.
+#include <linux/firmware/cirrus/wmfw.h>
#include <linux/gpio/consumer.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/types.h>
+#include <sound/cs-amp-lib.h>
#include "cs35l56.h"
@@ -36,6 +38,8 @@ int cs35l56_set_patch(struct cs35l56_base *cs35l56_base)
EXPORT_SYMBOL_NS_GPL(cs35l56_set_patch, SND_SOC_CS35L56_SHARED);
static const struct reg_default cs35l56_reg_defaults[] = {
+ /* no defaults for OTP_MEM - first read populates cache */
+
{ CS35L56_ASP1_ENABLES1, 0x00000000 },
{ CS35L56_ASP1_CONTROL1, 0x00000028 },
{ CS35L56_ASP1_CONTROL2, 0x18180200 },
@@ -91,6 +95,9 @@ static bool cs35l56_readable_reg(struct device *dev, unsigned int reg)
case CS35L56_BLOCK_ENABLES2:
case CS35L56_REFCLK_INPUT:
case CS35L56_GLOBAL_SAMPLE_RATE:
+ case CS35L56_OTP_MEM_53:
+ case CS35L56_OTP_MEM_54:
+ case CS35L56_OTP_MEM_55:
case CS35L56_ASP1_ENABLES1:
case CS35L56_ASP1_CONTROL1:
case CS35L56_ASP1_CONTROL2:
@@ -629,6 +636,81 @@ void cs35l56_init_cs_dsp(struct cs35l56_base *cs35l56_base, struct cs_dsp *cs_ds
}
EXPORT_SYMBOL_NS_GPL(cs35l56_init_cs_dsp, SND_SOC_CS35L56_SHARED);
+struct cs35l56_pte {
+ u8 x;
+ u8 wafer_id;
+ u8 pte[2];
+ u8 lot[3];
+ u8 y;
+ u8 unused[3];
+ u8 dvs;
+} __packed;
+static_assert((sizeof(struct cs35l56_pte) % sizeof(u32)) == 0);
+
+static int cs35l56_read_silicon_uid(struct cs35l56_base *cs35l56_base, u64 *uid)
+{
+ struct cs35l56_pte pte;
+ u64 unique_id;
+ int ret;
+
+ ret = regmap_raw_read(cs35l56_base->regmap, CS35L56_OTP_MEM_53, &pte, sizeof(pte));
+ if (ret) {
+ dev_err(cs35l56_base->dev, "Failed to read OTP: %d\n", ret);
+ return ret;
+ }
+
+ unique_id = pte.lot[2] | (pte.lot[1] << 8) | (pte.lot[0] << 16);
+ unique_id <<= 32;
+ unique_id |= pte.x | (pte.y << 8) | (pte.wafer_id << 16) | (pte.dvs << 24);
+
+ dev_dbg(cs35l56_base->dev, "UniqueID = %#llx\n", unique_id);
+
+ *uid = unique_id;
+
+ return 0;
+}
+
+/* Firmware calibration controls */
+const struct cirrus_amp_cal_controls cs35l56_calibration_controls = {
+ .alg_id = 0x9f210,
+ .mem_region = WMFW_ADSP2_YM,
+ .ambient = "CAL_AMBIENT",
+ .calr = "CAL_R",
+ .status = "CAL_STATUS",
+ .checksum = "CAL_CHECKSUM",
+};
+EXPORT_SYMBOL_NS_GPL(cs35l56_calibration_controls, SND_SOC_CS35L56_SHARED);
+
+int cs35l56_get_calibration(struct cs35l56_base *cs35l56_base)
+{
+ u64 silicon_uid;
+ int ret;
+
+ /* Driver can't apply calibration to a secured part, so skip */
+ if (cs35l56_base->secured)
+ return 0;
+
+ ret = cs35l56_read_silicon_uid(cs35l56_base, &silicon_uid);
+ if (ret < 0)
+ return ret;
+
+ ret = cs_amp_get_efi_calibration_data(cs35l56_base->dev, silicon_uid,
+ cs35l56_base->cal_index,
+ &cs35l56_base->cal_data);
+
+ /* Only return an error status if probe should be aborted */
+ if ((ret == -ENOENT) || (ret == -EOVERFLOW))
+ return 0;
+
+ if (ret < 0)
+ return ret;
+
+ cs35l56_base->cal_data_valid = true;
+
+ return 0;
+}
+EXPORT_SYMBOL_NS_GPL(cs35l56_get_calibration, SND_SOC_CS35L56_SHARED);
+
int cs35l56_read_prot_status(struct cs35l56_base *cs35l56_base,
bool *fw_missing, unsigned int *fw_version)
{
@@ -923,3 +1005,4 @@ MODULE_DESCRIPTION("ASoC CS35L56 Shared");
MODULE_AUTHOR("Richard Fitzgerald <rf@opensource.cirrus.com>");
MODULE_AUTHOR("Simon Trimmer <simont@opensource.cirrus.com>");
MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(SND_SOC_CS_AMP_LIB);
Adds some helper functions and data for applying amp calibration. 1. cs35l56_read_silicon_uid() to get the silicon ID that is used to search for the correct calibration data entry. 2. Add the registers for the silicon ID to the readable registers. 3. cs35l56_get_calibration() wrapper around cs_amp_get_efi_calibration_data() 4. cs35l56_calibration_controls() table of the firmware controls for calibration data. 5. Added members to struct cs35l56_base to store the calibration data. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> --- include/sound/cs35l56.h | 10 ++++ sound/soc/codecs/Kconfig | 1 + sound/soc/codecs/cs35l56-shared.c | 83 +++++++++++++++++++++++++++++++ 3 files changed, 94 insertions(+)