diff mbox series

[2/5] wifi: brcmsmac: silence sparse warnings

Message ID 20240223114023.06e5ade90bcd.I41a0cbae1fa259cfbf5fa117ddfce908877475a2@changeid
State New
Headers show
Series [1/5] wifi: b43: silence sparse warnings | expand

Commit Message

Johannes Berg Feb. 23, 2024, 10:40 a.m. UTC 
From: Johannes Berg <johannes.berg@intel.com>

sparse complains on this code about casts that lose bits
due to the usage of bitwise not, but really we do want
16 bits only, so clarify that by using masks.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---
 .../broadcom/brcm80211/brcmsmac/phy/phy_lcn.c    |  2 +-
 .../broadcom/brcm80211/brcmsmac/phy/phy_n.c      | 16 +++++++++-------
 2 files changed, 10 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c
index 7717eb85a1db..aae2cf95fe95 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c
@@ -3299,7 +3299,7 @@  wlc_lcnphy_run_samples(struct brcms_phy *pi,
 
 	if (iqcalmode) {
 
-		and_phy_reg(pi, 0x453, (u16) ~(0x1 << 15));
+		and_phy_reg(pi, 0x453, 0xffff & ~(0x1 << 15));
 		or_phy_reg(pi, 0x453, (0x1 << 15));
 	} else {
 		write_phy_reg(pi, 0x63f, 1);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c
index 8580a2754789..ffa4b7c5ed25 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c
@@ -17587,7 +17587,7 @@  static void wlc_phy_txpwrctrl_pwr_setup_nphy(struct brcms_phy *pi)
 	or_phy_reg(pi, 0x122, (0x1 << 0));
 
 	if (NREV_GE(pi->pubpi.phy_rev, 3))
-		and_phy_reg(pi, 0x1e7, (u16) (~(0x1 << 15)));
+		and_phy_reg(pi, 0x1e7, 0x7fff);
 	else
 		or_phy_reg(pi, 0x1e7, (0x1 << 15));
 
@@ -18086,7 +18086,7 @@  wlc_phy_rfctrlintc_override_nphy(struct brcms_phy *pi, u8 field, u16 value,
 						   (0x1 << 10));
 
 					and_phy_reg(pi, 0x2ff, (u16)
-						    ~(0x3 << 14));
+						    0xffff & ~(0x3 << 14));
 					or_phy_reg(pi, 0x2ff, (0x1 << 13));
 					or_phy_reg(pi, 0x2ff, (0x1 << 0));
 				} else {
@@ -21053,7 +21053,7 @@  wlc_phy_chanspec_nphy_setup(struct brcms_phy *pi, u16 chanspec,
 		      (val | MAC_PHY_FORCE_CLK));
 
 		and_phy_reg(pi, (NPHY_TO_BPHY_OFF + BPHY_BB_CONFIG),
-			    (u16) (~(BBCFG_RESETCCA | BBCFG_RESETRX)));
+			    0xffff & ~(BBCFG_RESETCCA | BBCFG_RESETRX));
 
 		bcma_write16(pi->d11core, D11REGOFFS(psm_phy_hdr_param), val);
 	}
@@ -21287,7 +21287,8 @@  void wlc_phy_antsel_init(struct brcms_phy_pub *ppi, bool lut_init)
 
 		bcma_set16(pi->d11core, D11REGOFFS(psm_gpio_oe), mask);
 
-		bcma_mask16(pi->d11core, D11REGOFFS(psm_gpio_out), ~mask);
+		bcma_mask16(pi->d11core, D11REGOFFS(psm_gpio_out),
+			    0xffff & ~mask);
 
 		if (lut_init) {
 			write_phy_reg(pi, 0xf8, 0x02d8);
@@ -23197,7 +23198,7 @@  void wlc_phy_stopplayback_nphy(struct brcms_phy *pi)
 		or_phy_reg(pi, 0xc3, NPHY_sampleCmd_STOP);
 	else if (playback_status & 0x2)
 		and_phy_reg(pi, 0xc2,
-			    (u16) ~NPHY_iqloCalCmdGctl_IQLO_CAL_EN);
+			    0xffff & ~NPHY_iqloCalCmdGctl_IQLO_CAL_EN);
 
 	and_phy_reg(pi, 0xc3, (u16) ~(0x1 << 2));
 
@@ -28202,8 +28203,9 @@  void wlc_phy_txpwrctrl_enable_nphy(struct brcms_phy *pi, u8 ctrl_type)
 
 		if (NREV_GE(pi->pubpi.phy_rev, 3))
 			and_phy_reg(pi, 0x1e7,
-				    (u16) (~((0x1 << 15) |
-					     (0x1 << 14) | (0x1 << 13))));
+				    0xffff & ~((0x1 << 15) |
+					       (0x1 << 14) |
+					       (0x1 << 13)));
 		else
 			and_phy_reg(pi, 0x1e7,
 				    (u16) (~((0x1 << 14) | (0x1 << 13))));