diff mbox series

dt-bindings: mmc: fsl-imx-mmc: Document the required clocks

Message ID 20240222143656.978759-1-festevam@gmail.com
State New
Headers show
Series dt-bindings: mmc: fsl-imx-mmc: Document the required clocks | expand

Commit Message

Fabio Estevam Feb. 22, 2024, 2:36 p.m. UTC 
From: Fabio Estevam <festevam@denx.de>

The fsl-imx-mmc hardware needs two clocks to operate: ipg and per.

Document these required clocks.

This fixes the following schema warning:

imx27-apf27dev.dtb: mmc@10014000: Unevaluated properties are not allowed ('clock-names', 'clocks' were unexpected)
	from schema $id: http://devicetree.org/schemas/mmc/fsl-imx-mmc.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
 .../devicetree/bindings/mmc/fsl-imx-mmc.yaml         | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Krzysztof Kozlowski Feb. 24, 2024, 10:32 a.m. UTC | #1 
On 22/02/2024 15:36, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@denx.de>
> 
> The fsl-imx-mmc hardware needs two clocks to operate: ipg and per.
> 
> Document these required clocks.
> 
> This fixes the following schema warning:

Mistake in DT list address, so this won't be tested by automation.

Please resend with correct DT list. In case you already did it: feel
free to ignore this email. :)

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml
index 221f5bc047bd..7911316fbd6a 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml
@@ -24,6 +24,14 @@  properties:
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
   interrupts:
     maxItems: 1
 
@@ -34,6 +42,8 @@  properties:
     const: rx-tx
 
 required:
+  - clocks
+  - clock-names
   - compatible
   - reg
   - interrupts
@@ -46,6 +56,8 @@  examples:
         compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
         reg = <0x10014000 0x1000>;
         interrupts = <11>;
+        clocks = <&clks 29>, <&clks 60>;
+        clock-names = "ipg", "per";
         dmas = <&dma 7>;
         dma-names = "rx-tx";
         bus-width = <4>;