| Message ID | 20240301213231.10340-6-laurent.pinchart@ideasonboard.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | media: Add driver for the Raspberry Pi <5 CSI-2 receiver | expand |
Hi Jacopo, On Mon, Mar 04, 2024 at 10:47:19AM +0100, Jacopo Mondi wrote: > On Fri, Mar 01, 2024 at 11:32:20PM +0200, Laurent Pinchart wrote: > > The IMX219 generates embedded data unconditionally. Report it as an > > additional stream, with a new internal embedded data pad, and update > > subdev operations accordingly. > > > > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > --- > > drivers/media/i2c/imx219.c | 173 ++++++++++++++++++++++++++++++++----- > > 1 file changed, 151 insertions(+), 22 deletions(-) > > > > diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c > > index 6e0232b6772b..cfbf4c304a9a 100644 > > --- a/drivers/media/i2c/imx219.c > > +++ b/drivers/media/i2c/imx219.c > > @@ -149,6 +149,9 @@ > > #define IMX219_PIXEL_ARRAY_WIDTH 3280U > > #define IMX219_PIXEL_ARRAY_HEIGHT 2464U > > > > +/* Embedded metadata stream height */ > > +#define IMX219_EMBEDDED_DATA_HEIGHT 2U > > + > > /* Mode : resolution and related config&values */ > > struct imx219_mode { > > /* Frame width */ > > @@ -317,9 +320,15 @@ static const struct imx219_mode supported_modes[] = { > > enum imx219_pad_ids { > > IMX219_PAD_SOURCE, > > IMX219_PAD_IMAGE, > > + IMX219_PAD_EDATA, > > IMX219_NUM_PADS, > > }; > > > > +enum imx219_stream_ids { > > + IMX219_STREAM_IMAGE, > > + IMX219_STREAM_EDATA, > > +}; > > + > > struct imx219 { > > struct v4l2_subdev sd; > > struct media_pad pads[IMX219_NUM_PADS]; > > @@ -613,6 +622,25 @@ static int imx219_format_bpp(u32 code) > > } > > } > > > > +/* Return the embedded data format corresponding to an image format. */ > > +static u32 imx219_format_edata(u32 code) > > +{ > > + switch (code) { > > + case MEDIA_BUS_FMT_SRGGB8_1X8: > > + case MEDIA_BUS_FMT_SGRBG8_1X8: > > + case MEDIA_BUS_FMT_SGBRG8_1X8: > > + case MEDIA_BUS_FMT_SBGGR8_1X8: > > + return MEDIA_BUS_FMT_META_8; > > + > > + case MEDIA_BUS_FMT_SRGGB10_1X10: > > + case MEDIA_BUS_FMT_SGRBG10_1X10: > > + case MEDIA_BUS_FMT_SGBRG10_1X10: > > + case MEDIA_BUS_FMT_SBGGR10_1X10: > > + default: > > + return MEDIA_BUS_FMT_META_10; > > + } > > +} > > + > > static int imx219_set_framefmt(struct imx219 *imx219, > > struct v4l2_subdev_state *state) > > { > > @@ -622,7 +650,8 @@ static int imx219_set_framefmt(struct imx219 *imx219, > > u64 bin_h, bin_v; > > int ret = 0; > > > > - format = v4l2_subdev_state_get_format(state, IMX219_PAD_SOURCE); > > + format = v4l2_subdev_state_get_format(state, IMX219_PAD_SOURCE, > > + IMX219_STREAM_IMAGE); > > crop = v4l2_subdev_state_get_crop(state, IMX219_PAD_IMAGE); > > bpp = imx219_format_bpp(format->code); > > > > @@ -777,17 +806,33 @@ static int imx219_enum_mbus_code(struct v4l2_subdev *sd, > > { > > struct imx219 *imx219 = to_imx219(sd); > > > > - if (code->pad == IMX219_PAD_IMAGE) { > > + switch (code->pad) { > > + case IMX219_PAD_IMAGE: > > /* The internal image pad is hardwired to the native format. */ > > - if (code->index) > > + if (code->index > 0) > > return -EINVAL; > > > > code->code = IMX219_NATIVE_FORMAT; > > - } else { > > - /* > > - * On the source pad, the sensor supports multiple raw formats > > - * with different bit depths. > > - */ > > + return 0; > > + > > + case IMX219_PAD_EDATA: > > + if (code->index > 0) > > + return -EINVAL; > > + > > + code->code = MEDIA_BUS_FMT_CCS_EMBEDDED; > > + return 0; > > + > > + case IMX219_PAD_SOURCE: > > + default: > > + break; > > Do you need these ? Not strictly speaking, but I think it better conveys the intention of the code by showing that I want the function to continue for the source pad. I can drop them if you prefer. > > + } > > + > > + /* > > + * On the source pad, the sensor supports multiple image raw formats > > + * with different bit depths. The embedded data format bit depth > > + * follows the image stream. > > + */ > > + if (code->stream == IMX219_STREAM_IMAGE) { > > u32 format; > > > > if (code->index >= (ARRAY_SIZE(imx219_mbus_formats) / 4)) > > @@ -795,6 +840,15 @@ static int imx219_enum_mbus_code(struct v4l2_subdev *sd, > > > > format = imx219_mbus_formats[code->index * 4]; > > code->code = imx219_get_format_code(imx219, format); > > + } else { > > + struct v4l2_mbus_framefmt *fmt; > > + > > + if (code->index > 0) > > + return -EINVAL; > > + > > + fmt = v4l2_subdev_state_get_format(state, IMX219_PAD_SOURCE, > > + IMX219_STREAM_EDATA); > > + code->code = fmt->code; > > } > > > > return 0; > > @@ -806,7 +860,8 @@ static int imx219_enum_frame_size(struct v4l2_subdev *sd, > > { > > struct imx219 *imx219 = to_imx219(sd); > > > > - if (fse->pad == IMX219_PAD_IMAGE) { > > + switch (fse->pad) { > > + case IMX219_PAD_IMAGE: > > if (fse->code != IMX219_NATIVE_FORMAT || fse->index > 0) > > return -EINVAL; > > > > @@ -814,7 +869,24 @@ static int imx219_enum_frame_size(struct v4l2_subdev *sd, > > fse->max_width = IMX219_NATIVE_WIDTH; > > fse->min_height = IMX219_NATIVE_HEIGHT; > > fse->max_height = IMX219_NATIVE_HEIGHT; > > - } else { > > + return 0; > > + > > + case IMX219_PAD_EDATA: > > + if (fse->code != MEDIA_BUS_FMT_CCS_EMBEDDED || fse->index > 0) > > + return -EINVAL; > > + > > + fse->min_width = IMX219_NATIVE_WIDTH; > > + fse->max_width = IMX219_NATIVE_WIDTH; > > + fse->min_height = IMX219_EMBEDDED_DATA_HEIGHT; > > + fse->max_height = IMX219_EMBEDDED_DATA_HEIGHT; > > + return 0; > > + > > + case IMX219_PAD_SOURCE: > > + default: > > + break; > > + } > > + > > + if (fse->stream == IMX219_STREAM_IMAGE) { > > if (fse->code != imx219_get_format_code(imx219, fse->code) || > > fse->index >= ARRAY_SIZE(supported_modes)) > > return -EINVAL; > > @@ -823,6 +895,21 @@ static int imx219_enum_frame_size(struct v4l2_subdev *sd, > > fse->max_width = fse->min_width; > > fse->min_height = supported_modes[fse->index].height; > > fse->max_height = fse->min_height; > > + } else { > > + struct v4l2_mbus_framefmt *fmt; > > + > > + fmt = v4l2_subdev_state_get_format(state, IMX219_PAD_SOURCE, > > + IMX219_STREAM_EDATA); > > + if (fse->code != fmt->code) > > + return -EINVAL; > > + > > + if (fse->index) > > + return -EINVAL; > > + > > + fse->min_width = fmt->width; > > + fse->max_width = fmt->width; > > + fse->min_height = IMX219_EMBEDDED_DATA_HEIGHT; > > + fse->max_height = IMX219_EMBEDDED_DATA_HEIGHT; > > } > > > > return 0; > > @@ -834,6 +921,7 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd, > > { > > struct imx219 *imx219 = to_imx219(sd); > > const struct imx219_mode *mode; > > + struct v4l2_mbus_framefmt *ed_format; > > struct v4l2_mbus_framefmt *format; > > struct v4l2_rect *compose; > > struct v4l2_rect *crop; > > @@ -841,9 +929,9 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd, > > > > /* > > * The driver is mode-based, the format can be set on the source pad > > - * only. > > + * only, and only for the image streeam. > > */ > > - if (fmt->pad != IMX219_PAD_SOURCE) > > + if (fmt->pad != IMX219_PAD_SOURCE || fmt->stream != IMX219_STREAM_IMAGE) > > return v4l2_subdev_get_fmt(sd, state, fmt); > > > > /* > > @@ -900,15 +988,31 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd, > > * No mode use digital crop, the source pad crop rectangle size and > > * format are thus identical to the image pad compose rectangle. > > */ > > - crop = v4l2_subdev_state_get_crop(state, IMX219_PAD_SOURCE); > > + crop = v4l2_subdev_state_get_crop(state, IMX219_PAD_SOURCE, > > + IMX219_STREAM_IMAGE); > > crop->left = 0; > > crop->top = 0; > > crop->width = fmt->format.width; > > crop->height = fmt->format.height; > > > > - format = v4l2_subdev_state_get_format(state, IMX219_PAD_SOURCE); > > + format = v4l2_subdev_state_get_format(state, IMX219_PAD_SOURCE, > > + IMX219_STREAM_IMAGE); > > *format = fmt->format; > > > > + /* > > + * Finally, update the formats on the sink and source sides of the > > + * embedded data stream. > > + */ > > + ed_format = v4l2_subdev_state_get_format(state, IMX219_PAD_EDATA); > > + ed_format->code = imx219_format_edata(format->code); > > One could consider making imx219_format_edata() retrieve the > [PAD_SOURCE/STREAM_IMAGE] format internally instead of passing it from > outside, to avoid passing in a from format True, but I need to retrieve that format above anyway, so it would be less efficient. The function has a single caller, I don't want to presume how it could evolve in the future and try to optimize for that. > > + ed_format->width = format->width; > > + ed_format->height = IMX219_EMBEDDED_DATA_HEIGHT; > > + ed_format->field = V4L2_FIELD_NONE; > > + > > + format = v4l2_subdev_state_get_format(state, IMX219_PAD_SOURCE, > > + IMX219_STREAM_EDATA); > > + *format = *ed_format; > > Or > *v4l2_subdev_state_get_format(state, IMX219_PAD_SOURCE, > IMX219_STREAM_EDATA) = *ed_format; > > To avoid re-assigning 'format' which now points to the [0/0] format > and might be reused later to update controls ? I could use fmt->width and fmt->height instead of mode->width and mode->height, so I can reassign format. > > + > > if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { > > int exposure_max; > > int exposure_def; > > @@ -947,6 +1051,13 @@ static int imx219_get_selection(struct v4l2_subdev *sd, > > { > > struct v4l2_rect *compose; > > > > + /* > > + * The embedded data stream doesn't support selection rectangles, > > + * neither on the embedded data pad nor on the source pad. > > + */ > > + if (sel->pad == IMX219_PAD_EDATA || sel->stream != 0) > > + return -EINVAL; > > + > > switch (sel->target) { > > case V4L2_SEL_TGT_NATIVE_SIZE: > > if (sel->pad != IMX219_PAD_IMAGE) > > @@ -999,12 +1110,18 @@ static int imx219_get_selection(struct v4l2_subdev *sd, > > static int imx219_init_state(struct v4l2_subdev *sd, > > struct v4l2_subdev_state *state) > > { > > - struct v4l2_subdev_route routes[1] = { > > + struct v4l2_subdev_route routes[2] = { > > { > > .sink_pad = IMX219_PAD_IMAGE, > > .sink_stream = 0, > > .source_pad = IMX219_PAD_SOURCE, > > - .source_stream = 0, > > + .source_stream = IMX219_STREAM_IMAGE, > > + .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE, > > + }, { > > + .sink_pad = IMX219_PAD_EDATA, > > + .sink_stream = 0, > > + .source_pad = IMX219_PAD_SOURCE, > > + .source_stream = IMX219_STREAM_EDATA, > > .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE, > > }, > > }; > > @@ -1016,7 +1133,7 @@ static int imx219_init_state(struct v4l2_subdev *sd, > > struct v4l2_subdev_format fmt = { > > .which = V4L2_SUBDEV_FORMAT_TRY, > > .pad = IMX219_PAD_SOURCE, > > - .stream = 0, > > + .stream = IMX219_STREAM_IMAGE, > > .format = { > > .code = MEDIA_BUS_FMT_SRGGB10_1X10, > > .width = supported_modes[0].width, > > @@ -1029,6 +1146,10 @@ static int imx219_init_state(struct v4l2_subdev *sd, > > if (ret) > > return ret; > > > > + /* > > + * Set the image stream format on the source pad. This will be > > + * propagated to all formats and selection rectangles internally. > > + */ > > imx219_set_pad_format(sd, state, &fmt); > > > > return 0; > > @@ -1045,21 +1166,27 @@ static int imx219_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, > > return -EINVAL; > > > > state = v4l2_subdev_lock_and_get_active_state(sd); > > - fmt = v4l2_subdev_state_get_stream_format(state, IMX219_PAD_SOURCE, 0); > > + fmt = v4l2_subdev_state_get_format(state, IMX219_PAD_SOURCE, > > + IMX219_STREAM_IMAGE); > > code = fmt->code; > > v4l2_subdev_unlock_state(state); > > > > fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2; > > - fd->num_entries = 1; > > + fd->num_entries = 2; > > > > memset(fd->entry, 0, sizeof(fd->entry)); > > > > fd->entry[0].pixelcode = code; > > - fd->entry[0].stream = 0; > > + fd->entry[0].stream = IMX219_STREAM_IMAGE; > > fd->entry[0].bus.csi2.vc = 0; > > fd->entry[0].bus.csi2.dt = imx219_format_bpp(code) == 8 > > ? MIPI_CSI2_DT_RAW8 : MIPI_CSI2_DT_RAW10; > > > > + fd->entry[1].pixelcode = code; > > Is the mbus_code on this second entry the same as the first one ? That's not right. I'll fix it. > > + fd->entry[1].stream = IMX219_STREAM_EDATA; > > + fd->entry[1].bus.csi2.vc = 0; > > + fd->entry[1].bus.csi2.dt = MIPI_CSI2_DT_EMBEDDED_8B; > > + > > return 0; > > } > > > > @@ -1323,12 +1450,14 @@ static int imx219_probe(struct i2c_client *client) > > /* > > * Initialize the pads. To preserve backward compatibility with > > * userspace that used the sensor before the introduction of the > > - * internal image pad, the external source pad is numbered 0 and the > > - * internal image pad numbered 1. > > + * internal pads, the external source pad is numbered 0 and the internal > > + * image and embedded data pads numbered 1 and 2 respectively. > > */ > > imx219->pads[IMX219_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; > > imx219->pads[IMX219_PAD_IMAGE].flags = MEDIA_PAD_FL_SINK > > | MEDIA_PAD_FL_INTERNAL; > > + imx219->pads[IMX219_PAD_EDATA].flags = MEDIA_PAD_FL_SINK > > + | MEDIA_PAD_FL_INTERNAL; > > > > ret = media_entity_pads_init(&imx219->sd.entity, > > ARRAY_SIZE(imx219->pads), imx219->pads);
diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c index 6e0232b6772b..cfbf4c304a9a 100644 --- a/drivers/media/i2c/imx219.c +++ b/drivers/media/i2c/imx219.c @@ -149,6 +149,9 @@ #define IMX219_PIXEL_ARRAY_WIDTH 3280U #define IMX219_PIXEL_ARRAY_HEIGHT 2464U +/* Embedded metadata stream height */ +#define IMX219_EMBEDDED_DATA_HEIGHT 2U + /* Mode : resolution and related config&values */ struct imx219_mode { /* Frame width */ @@ -317,9 +320,15 @@ static const struct imx219_mode supported_modes[] = { enum imx219_pad_ids { IMX219_PAD_SOURCE, IMX219_PAD_IMAGE, + IMX219_PAD_EDATA, IMX219_NUM_PADS, }; +enum imx219_stream_ids { + IMX219_STREAM_IMAGE, + IMX219_STREAM_EDATA, +}; + struct imx219 { struct v4l2_subdev sd; struct media_pad pads[IMX219_NUM_PADS]; @@ -613,6 +622,25 @@ static int imx219_format_bpp(u32 code) } } +/* Return the embedded data format corresponding to an image format. */ +static u32 imx219_format_edata(u32 code) +{ + switch (code) { + case MEDIA_BUS_FMT_SRGGB8_1X8: + case MEDIA_BUS_FMT_SGRBG8_1X8: + case MEDIA_BUS_FMT_SGBRG8_1X8: + case MEDIA_BUS_FMT_SBGGR8_1X8: + return MEDIA_BUS_FMT_META_8; + + case MEDIA_BUS_FMT_SRGGB10_1X10: + case MEDIA_BUS_FMT_SGRBG10_1X10: + case MEDIA_BUS_FMT_SGBRG10_1X10: + case MEDIA_BUS_FMT_SBGGR10_1X10: + default: + return MEDIA_BUS_FMT_META_10; + } +} + static int imx219_set_framefmt(struct imx219 *imx219, struct v4l2_subdev_state *state) { @@ -622,7 +650,8 @@ static int imx219_set_framefmt(struct imx219 *imx219, u64 bin_h, bin_v; int ret = 0; - format = v4l2_subdev_state_get_format(state, IMX219_PAD_SOURCE); + format = v4l2_subdev_state_get_format(state, IMX219_PAD_SOURCE, + IMX219_STREAM_IMAGE); crop = v4l2_subdev_state_get_crop(state, IMX219_PAD_IMAGE); bpp = imx219_format_bpp(format->code); @@ -777,17 +806,33 @@ static int imx219_enum_mbus_code(struct v4l2_subdev *sd, { struct imx219 *imx219 = to_imx219(sd); - if (code->pad == IMX219_PAD_IMAGE) { + switch (code->pad) { + case IMX219_PAD_IMAGE: /* The internal image pad is hardwired to the native format. */ - if (code->index) + if (code->index > 0) return -EINVAL; code->code = IMX219_NATIVE_FORMAT; - } else { - /* - * On the source pad, the sensor supports multiple raw formats - * with different bit depths. - */ + return 0; + + case IMX219_PAD_EDATA: + if (code->index > 0) + return -EINVAL; + + code->code = MEDIA_BUS_FMT_CCS_EMBEDDED; + return 0; + + case IMX219_PAD_SOURCE: + default: + break; + } + + /* + * On the source pad, the sensor supports multiple image raw formats + * with different bit depths. The embedded data format bit depth + * follows the image stream. + */ + if (code->stream == IMX219_STREAM_IMAGE) { u32 format; if (code->index >= (ARRAY_SIZE(imx219_mbus_formats) / 4)) @@ -795,6 +840,15 @@ static int imx219_enum_mbus_code(struct v4l2_subdev *sd, format = imx219_mbus_formats[code->index * 4]; code->code = imx219_get_format_code(imx219, format); + } else { + struct v4l2_mbus_framefmt *fmt; + + if (code->index > 0) + return -EINVAL; + + fmt = v4l2_subdev_state_get_format(state, IMX219_PAD_SOURCE, + IMX219_STREAM_EDATA); + code->code = fmt->code; } return 0; @@ -806,7 +860,8 @@ static int imx219_enum_frame_size(struct v4l2_subdev *sd, { struct imx219 *imx219 = to_imx219(sd); - if (fse->pad == IMX219_PAD_IMAGE) { + switch (fse->pad) { + case IMX219_PAD_IMAGE: if (fse->code != IMX219_NATIVE_FORMAT || fse->index > 0) return -EINVAL; @@ -814,7 +869,24 @@ static int imx219_enum_frame_size(struct v4l2_subdev *sd, fse->max_width = IMX219_NATIVE_WIDTH; fse->min_height = IMX219_NATIVE_HEIGHT; fse->max_height = IMX219_NATIVE_HEIGHT; - } else { + return 0; + + case IMX219_PAD_EDATA: + if (fse->code != MEDIA_BUS_FMT_CCS_EMBEDDED || fse->index > 0) + return -EINVAL; + + fse->min_width = IMX219_NATIVE_WIDTH; + fse->max_width = IMX219_NATIVE_WIDTH; + fse->min_height = IMX219_EMBEDDED_DATA_HEIGHT; + fse->max_height = IMX219_EMBEDDED_DATA_HEIGHT; + return 0; + + case IMX219_PAD_SOURCE: + default: + break; + } + + if (fse->stream == IMX219_STREAM_IMAGE) { if (fse->code != imx219_get_format_code(imx219, fse->code) || fse->index >= ARRAY_SIZE(supported_modes)) return -EINVAL; @@ -823,6 +895,21 @@ static int imx219_enum_frame_size(struct v4l2_subdev *sd, fse->max_width = fse->min_width; fse->min_height = supported_modes[fse->index].height; fse->max_height = fse->min_height; + } else { + struct v4l2_mbus_framefmt *fmt; + + fmt = v4l2_subdev_state_get_format(state, IMX219_PAD_SOURCE, + IMX219_STREAM_EDATA); + if (fse->code != fmt->code) + return -EINVAL; + + if (fse->index) + return -EINVAL; + + fse->min_width = fmt->width; + fse->max_width = fmt->width; + fse->min_height = IMX219_EMBEDDED_DATA_HEIGHT; + fse->max_height = IMX219_EMBEDDED_DATA_HEIGHT; } return 0; @@ -834,6 +921,7 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd, { struct imx219 *imx219 = to_imx219(sd); const struct imx219_mode *mode; + struct v4l2_mbus_framefmt *ed_format; struct v4l2_mbus_framefmt *format; struct v4l2_rect *compose; struct v4l2_rect *crop; @@ -841,9 +929,9 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd, /* * The driver is mode-based, the format can be set on the source pad - * only. + * only, and only for the image streeam. */ - if (fmt->pad != IMX219_PAD_SOURCE) + if (fmt->pad != IMX219_PAD_SOURCE || fmt->stream != IMX219_STREAM_IMAGE) return v4l2_subdev_get_fmt(sd, state, fmt); /* @@ -900,15 +988,31 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd, * No mode use digital crop, the source pad crop rectangle size and * format are thus identical to the image pad compose rectangle. */ - crop = v4l2_subdev_state_get_crop(state, IMX219_PAD_SOURCE); + crop = v4l2_subdev_state_get_crop(state, IMX219_PAD_SOURCE, + IMX219_STREAM_IMAGE); crop->left = 0; crop->top = 0; crop->width = fmt->format.width; crop->height = fmt->format.height; - format = v4l2_subdev_state_get_format(state, IMX219_PAD_SOURCE); + format = v4l2_subdev_state_get_format(state, IMX219_PAD_SOURCE, + IMX219_STREAM_IMAGE); *format = fmt->format; + /* + * Finally, update the formats on the sink and source sides of the + * embedded data stream. + */ + ed_format = v4l2_subdev_state_get_format(state, IMX219_PAD_EDATA); + ed_format->code = imx219_format_edata(format->code); + ed_format->width = format->width; + ed_format->height = IMX219_EMBEDDED_DATA_HEIGHT; + ed_format->field = V4L2_FIELD_NONE; + + format = v4l2_subdev_state_get_format(state, IMX219_PAD_SOURCE, + IMX219_STREAM_EDATA); + *format = *ed_format; + if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { int exposure_max; int exposure_def; @@ -947,6 +1051,13 @@ static int imx219_get_selection(struct v4l2_subdev *sd, { struct v4l2_rect *compose; + /* + * The embedded data stream doesn't support selection rectangles, + * neither on the embedded data pad nor on the source pad. + */ + if (sel->pad == IMX219_PAD_EDATA || sel->stream != 0) + return -EINVAL; + switch (sel->target) { case V4L2_SEL_TGT_NATIVE_SIZE: if (sel->pad != IMX219_PAD_IMAGE) @@ -999,12 +1110,18 @@ static int imx219_get_selection(struct v4l2_subdev *sd, static int imx219_init_state(struct v4l2_subdev *sd, struct v4l2_subdev_state *state) { - struct v4l2_subdev_route routes[1] = { + struct v4l2_subdev_route routes[2] = { { .sink_pad = IMX219_PAD_IMAGE, .sink_stream = 0, .source_pad = IMX219_PAD_SOURCE, - .source_stream = 0, + .source_stream = IMX219_STREAM_IMAGE, + .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE, + }, { + .sink_pad = IMX219_PAD_EDATA, + .sink_stream = 0, + .source_pad = IMX219_PAD_SOURCE, + .source_stream = IMX219_STREAM_EDATA, .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE, }, }; @@ -1016,7 +1133,7 @@ static int imx219_init_state(struct v4l2_subdev *sd, struct v4l2_subdev_format fmt = { .which = V4L2_SUBDEV_FORMAT_TRY, .pad = IMX219_PAD_SOURCE, - .stream = 0, + .stream = IMX219_STREAM_IMAGE, .format = { .code = MEDIA_BUS_FMT_SRGGB10_1X10, .width = supported_modes[0].width, @@ -1029,6 +1146,10 @@ static int imx219_init_state(struct v4l2_subdev *sd, if (ret) return ret; + /* + * Set the image stream format on the source pad. This will be + * propagated to all formats and selection rectangles internally. + */ imx219_set_pad_format(sd, state, &fmt); return 0; @@ -1045,21 +1166,27 @@ static int imx219_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, return -EINVAL; state = v4l2_subdev_lock_and_get_active_state(sd); - fmt = v4l2_subdev_state_get_stream_format(state, IMX219_PAD_SOURCE, 0); + fmt = v4l2_subdev_state_get_format(state, IMX219_PAD_SOURCE, + IMX219_STREAM_IMAGE); code = fmt->code; v4l2_subdev_unlock_state(state); fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2; - fd->num_entries = 1; + fd->num_entries = 2; memset(fd->entry, 0, sizeof(fd->entry)); fd->entry[0].pixelcode = code; - fd->entry[0].stream = 0; + fd->entry[0].stream = IMX219_STREAM_IMAGE; fd->entry[0].bus.csi2.vc = 0; fd->entry[0].bus.csi2.dt = imx219_format_bpp(code) == 8 ? MIPI_CSI2_DT_RAW8 : MIPI_CSI2_DT_RAW10; + fd->entry[1].pixelcode = code; + fd->entry[1].stream = IMX219_STREAM_EDATA; + fd->entry[1].bus.csi2.vc = 0; + fd->entry[1].bus.csi2.dt = MIPI_CSI2_DT_EMBEDDED_8B; + return 0; } @@ -1323,12 +1450,14 @@ static int imx219_probe(struct i2c_client *client) /* * Initialize the pads. To preserve backward compatibility with * userspace that used the sensor before the introduction of the - * internal image pad, the external source pad is numbered 0 and the - * internal image pad numbered 1. + * internal pads, the external source pad is numbered 0 and the internal + * image and embedded data pads numbered 1 and 2 respectively. */ imx219->pads[IMX219_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; imx219->pads[IMX219_PAD_IMAGE].flags = MEDIA_PAD_FL_SINK | MEDIA_PAD_FL_INTERNAL; + imx219->pads[IMX219_PAD_EDATA].flags = MEDIA_PAD_FL_SINK + | MEDIA_PAD_FL_INTERNAL; ret = media_entity_pads_init(&imx219->sd.entity, ARRAY_SIZE(imx219->pads), imx219->pads);
The IMX219 generates embedded data unconditionally. Report it as an additional stream, with a new internal embedded data pad, and update subdev operations accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- drivers/media/i2c/imx219.c | 173 ++++++++++++++++++++++++++++++++----- 1 file changed, 151 insertions(+), 22 deletions(-)