diff mbox

[1/3] ARM: memory: da8xx-ddrctl: new driver

Message ID 1476721850-454-2-git-send-email-bgolaszewski@baylibre.com
State New
Headers show

Commit Message

Bartosz Golaszewski Oct. 17, 2016, 4:30 p.m. UTC 
Create a new driver for the da8xx DDR2/mDDR controller and implement
support for writing to the Peripheral Bus Burst Priority Register.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 .../memory-controllers/ti-da8xx-ddrctl.txt         | 25 +++++++
 drivers/memory/Kconfig                             |  8 +++
 drivers/memory/Makefile                            |  1 +
 drivers/memory/da8xx-ddrctl.c                      | 77 ++++++++++++++++++++++
 4 files changed, 111 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/memory-controllers/ti-da8xx-ddrctl.txt
 create mode 100644 drivers/memory/da8xx-ddrctl.c
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/memory-controllers/ti-da8xx-ddrctl.txt b/Documentation/devicetree/bindings/memory-controllers/ti-da8xx-ddrctl.txt
new file mode 100644
index 0000000..e340404
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ti-da8xx-ddrctl.txt
@@ -0,0 +1,25 @@ 
+* Device tree bindings for Texas Instruments da8xx DDR2/mDDR memory controller
+
+The DDR2/mDDR memory controller present on Texas Instruments da8xx SoCs memory
+maps a set of registers which allow to tweak the controller's behavior.
+
+Documentation:
+OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh82c/spruh82c.pdf
+
+Required properties:
+
+- compatible:		"ti,da850-ddrctl"
+
+Optional properties:
+
+- ti,pr-old-count:	Priority raise old counter. Specifies the number of
+			memory transfers after which the DDR2/mDDR memory
+			controller will elevate the priority of the oldest
+			command in the command FIFO. Must be between 0-255.
+
+Example for da850 shown below.
+
+ddrctl {
+	compatible = "ti,da850-ddrctl";
+	ti,pr-old-count = <0x20>;
+};
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index 4b4c0c3..ec80e35 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -134,6 +134,14 @@  config MTK_SMI
 	  mainly help enable/disable iommu and control the power domain and
 	  clocks for each local arbiter.
 
+config DA8XX_DDRCTL
+	bool "Texas Instruments da8xx DDR2/mDDR driver"
+	depends on ARCH_DAVINCI_DA8XX
+	help
+	  This driver is for the DDR2/mDDR Memory Controller present on
+	  Texas Instruments da8xx SoCs. It's used to tweak various memory
+	  controller configuration options.
+
 source "drivers/memory/samsung/Kconfig"
 source "drivers/memory/tegra/Kconfig"
 
diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
index b20ae38..e88097fb 100644
--- a/drivers/memory/Makefile
+++ b/drivers/memory/Makefile
@@ -17,6 +17,7 @@  obj-$(CONFIG_MVEBU_DEVBUS)	+= mvebu-devbus.o
 obj-$(CONFIG_TEGRA20_MC)	+= tegra20-mc.o
 obj-$(CONFIG_JZ4780_NEMC)	+= jz4780-nemc.o
 obj-$(CONFIG_MTK_SMI)		+= mtk-smi.o
+obj-$(CONFIG_DA8XX_DDRCTL)	+= da8xx-ddrctl.o
 
 obj-$(CONFIG_SAMSUNG_MC)	+= samsung/
 obj-$(CONFIG_TEGRA_MC)		+= tegra/
diff --git a/drivers/memory/da8xx-ddrctl.c b/drivers/memory/da8xx-ddrctl.c
new file mode 100644
index 0000000..dcd0a61
--- /dev/null
+++ b/drivers/memory/da8xx-ddrctl.c
@@ -0,0 +1,77 @@ 
+/*
+ * TI da8xx DDR2/mDDR controller driver
+ *
+ * Copyright (C) 2016 BayLibre SAS
+ *
+ * Author:
+ *   Bartosz Golaszewski <bgolaszewski@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#define DA8XX_DDR_CTL_BASE	0xB0000000
+#define DA8XX_PBBPR_OFFSET	0x00000020
+#define DA8XX_PBBPR_REG(p)	((p) + DA8XX_PBBPR_OFFSET)
+
+#define DA8XX_PBBPR_MAX		0xff
+
+static void da8xx_ddrctl_set_pbbpr(void __iomem *ddrctl, struct device *dev)
+{
+	struct device_node *node = dev->of_node;
+	u32 pr_old_count;
+	int ret;
+
+	ret = of_property_read_u32(node, "ti,pr-old-count", &pr_old_count);
+	if (ret)
+		return;
+
+	if (pr_old_count > DA8XX_PBBPR_MAX) {
+		dev_warn(dev, "priority raise old counter value too high\n");
+		return;
+	}
+
+	__raw_writel(pr_old_count, DA8XX_PBBPR_REG(ddrctl));
+}
+
+static int da8xx_ddrctl_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	void __iomem *ddrctl;
+
+	ddrctl = ioremap(DA8XX_DDR_CTL_BASE, SZ_256);
+	if (!ddrctl) {
+		dev_err(dev, "unable to map memory controller registers\n");
+		return -EIO;
+	}
+
+	da8xx_ddrctl_set_pbbpr(ddrctl, dev);
+
+	iounmap(ddrctl);
+
+	return 0;
+}
+
+static const struct of_device_id da8xx_ddrctl_of_match[] = {
+	{ .compatible = "ti,da850-ddrctl", },
+	{ },
+};
+
+static struct platform_driver da8xx_ddrctl_driver = {
+	.probe = da8xx_ddrctl_probe,
+	.driver = {
+		.name = "da8xx-ddrctl",
+		.of_match_table = da8xx_ddrctl_of_match,
+	},
+};
+module_platform_driver(da8xx_ddrctl_driver);
+
+MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
+MODULE_DESCRIPTION("TI da8xx DDR2/mDDR controller driver");
+MODULE_LICENSE("GPL v2");