diff mbox

[2/7] ARM: ux500: Shorten Snowball's DT compatible gpio entry

Message ID 1334325909-5779-3-git-send-email-lee.jones@linaro.org
State Accepted
Commit 785834a18140ef832a2455bee3fad9b76011f562
Headers show

Commit Message

Lee Jones April 13, 2012, 2:05 p.m. UTC 
It is believed that the gpio compatible match entry is too long
and cumbersome in its current form. This patch takes steps to
decrease its length by using ST-Mircroelectrics' abbreviation ST.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/db8500.dtsi |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi
index f482845..421e15f 100644
--- a/arch/arm/boot/dts/db8500.dtsi
+++ b/arch/arm/boot/dts/db8500.dtsi
@@ -164,7 +164,7 @@ 
 		};
 
 		i2c@80004000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 			reg = <0x80004000 0x1000>;
 			interrupts = <0 21 0x4>;
 			#address-cells = <1>;
@@ -172,7 +172,7 @@ 
 		};
 
 		i2c@80122000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 			reg = <0x80122000 0x1000>;
 			interrupts = <0 22 0x4>;
 			#address-cells = <1>;
@@ -180,7 +180,7 @@ 
 		};
 
 		i2c@80128000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 			reg = <0x80128000 0x1000>;
 			interrupts = <0 55 0x4>;
 			#address-cells = <1>;
@@ -188,7 +188,7 @@ 
 		};
 
 		i2c@80110000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 			reg = <0x80110000 0x1000>;
 			interrupts = <0 12 0x4>;
 			#address-cells = <1>;
@@ -196,7 +196,7 @@ 
 		};
 
 		i2c@8012a000 {
-			compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
 			reg = <0x8012a000 0x1000>;
 			interrupts = <0 51 0x4>;
 			#address-cells = <1>;