diff mbox series

[v4,10/11] imx8mp_venice_defconfig: Enable PCIe/NVMe support

Message ID 20240321145507.619448-11-sumit.garg@linaro.org
State New
Headers show
Series imx8mp: Enable PCIe/NVMe support | expand

Commit Message

Sumit Garg March 21, 2024, 2:55 p.m. UTC 
From: Tim Harvey <tharvey@gateworks.com>

Enable PCIe/NVMe support. Also, enable the reset, regmap and syscon
drivers which are a prerequisite for PCIe support.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
[SG: rebased to next branch tip]
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
---
 configs/imx8mp_venice_defconfig | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/configs/imx8mp_venice_defconfig b/configs/imx8mp_venice_defconfig
index 501ccb0ba8f..6e4addc7728 100644
--- a/configs/imx8mp_venice_defconfig
+++ b/configs/imx8mp_venice_defconfig
@@ -12,6 +12,7 @@  CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mp-venice-gw71xx-2x"
 CONFIG_SPL_TEXT_BASE=0x920000
 CONFIG_TARGET_IMX8MP_VENICE=y
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_DM_RESET=y
 CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
@@ -21,6 +22,7 @@  CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x3f8000
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
 CONFIG_SYS_LOAD_ADDR=0x40480000
+CONFIG_PCI=y
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x80000000
 CONFIG_FIT=y
@@ -63,6 +65,7 @@  CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 CONFIG_SYS_DISABLE_AUTOLOAD=y
 CONFIG_CMD_CACHE=y
@@ -84,6 +87,8 @@  CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_IP_DEFRAG=y
 CONFIG_TFTP_BLOCKSIZE=4096
 CONFIG_SPL_DM=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
 CONFIG_CLK_COMPOSITE_CCF=y
 CONFIG_CLK_IMX8MP=y
 CONFIG_GPIO_HOG=y
@@ -112,7 +117,10 @@  CONFIG_FEC_MXC=y
 CONFIG_KSZ9477=y
 CONFIG_RGMII=y
 CONFIG_MII=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_IMX=y
 CONFIG_PHY_IMX8MQ_USB=y
+CONFIG_PHY_IMX8M_PCIE=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_IMX8M=y