diff mbox series

[1/1] GPIO support for Fintek family F819XX

Message ID 20240321170015.74544-2-linux@destefani.eng.br
State New
Headers show
Series gpio-f7188x: add support Fintek F81804 & F81966 | expand

Commit Message

Guilherme Destefani March 21, 2024, 5 p.m. UTC 
From: Guilherme Destefani <linux-gpio@destefani.eng.br>

Both F81804 (64 pins, 30 gpios) and chips F81962/F81964/F81966/F81967
(128 pins, 80 gpios) share the same chip ID, but use a different gpio
mapping. Read the second serial device enable register and test for 0xff
was the recommended method suggested by the chip manufacturer to tell
apart both chips.

Signed-off-by: Guilherme Destefani <linux-gpio@destefani.eng.br>
---
 drivers/gpio/gpio-f7188x.c | 28 ++++++++++++++++++++++++----
 1 file changed, 24 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpio/gpio-f7188x.c b/drivers/gpio/gpio-f7188x.c
index 3875fd940ccb..819ea95fece6 100644
--- a/drivers/gpio/gpio-f7188x.c
+++ b/drivers/gpio/gpio-f7188x.c
@@ -40,10 +40,11 @@ 
 #define SIO_F71889_ID		0x0909	/* F71889 chipset ID */
 #define SIO_F71889A_ID		0x1005	/* F71889A chipset ID */
 #define SIO_F81866_ID		0x1010	/* F81866 chipset ID */
-#define SIO_F81804_ID		0x1502  /* F81804 chipset ID, same for F81966 */
+#define SIO_F81804_F819XX_ID	0x1502  /* F81804 chipset ID, same for F81966 */
 #define SIO_F81865_ID		0x0704	/* F81865 chipset ID */
 
 #define SIO_LD_GPIO_FINTEK	0x06	/* GPIO logical device */
+#define SIO_LD_UART2_FINTEK	0x11	/* UART2 logical device, needed to test chip model */
 
 /*
  * Nuvoton devices.
@@ -60,6 +61,7 @@  enum chips {
 	f71889a,
 	f71889f,
 	f81866,
+	f819xx,
 	f81804,
 	f81865,
 	nct6126d,
@@ -72,6 +74,7 @@  static const char * const f7188x_names[] = {
 	"f71889a",
 	"f71889f",
 	"f81866",
+	"f819xx",
 	"f81804",
 	"f81865",
 	"nct6126d",
@@ -253,6 +256,18 @@  static struct f7188x_gpio_bank f81866_gpio_bank[] = {
 	F7188X_GPIO_BANK(8, 0x88, DRVNAME "-8"),
 };
 
+static struct f7188x_gpio_bank f819xx_gpio_bank[] = {
+	F7188X_GPIO_BANK(8, 0xF0, DRVNAME "-0"),
+	F7188X_GPIO_BANK(8, 0xE0, DRVNAME "-1"),
+	F7188X_GPIO_BANK(8, 0xD0, DRVNAME "-2"),
+	F7188X_GPIO_BANK(8, 0xC0, DRVNAME "-3"),
+	F7188X_GPIO_BANK(8, 0xB0, DRVNAME "-4"),
+	F7188X_GPIO_BANK(8, 0xA0, DRVNAME "-5"),
+	F7188X_GPIO_BANK(8, 0x90, DRVNAME "-6"),
+	F7188X_GPIO_BANK(8, 0x80, DRVNAME "-7"),
+	F7188X_GPIO_BANK(8, 0x88, DRVNAME "-8"),
+	F7188X_GPIO_BANK(8, 0x98, DRVNAME "-9"),
+};
 
 static struct f7188x_gpio_bank f81804_gpio_bank[] = {
 	F7188X_GPIO_BANK(8, 0xF0, DRVNAME "-0"),
@@ -482,7 +497,11 @@  static int f7188x_gpio_probe(struct platform_device *pdev)
 		data->nr_bank = ARRAY_SIZE(f81866_gpio_bank);
 		data->bank = f81866_gpio_bank;
 		break;
-	case  f81804:
+	case f819xx:
+		data->nr_bank = ARRAY_SIZE(f819xx_gpio_bank);
+		data->bank = f819xx_gpio_bank;
+		break;
+	case f81804:
 		data->nr_bank = ARRAY_SIZE(f81804_gpio_bank);
 		data->bank = f81804_gpio_bank;
 		break;
@@ -553,8 +572,9 @@  static int __init f7188x_find(int addr, struct f7188x_sio *sio)
 	case SIO_F81866_ID:
 		sio->type = f81866;
 		break;
-	case SIO_F81804_ID:
-		sio->type = f81804;
+	case SIO_F81804_F819XX_ID:
+		superio_select(addr, SIO_LD_UART2_FINTEK);
+		sio->type = (superio_inb(addr, 0x30) == 0xFF) ? f81804 : f819xx;
 		break;
 	case SIO_F81865_ID:
 		sio->type = f81865;